Abstract:A simple chemical surrogate fuel model may not be able to fully reproduce the chemical behavior in real fuel combustion. A structure–chemical reactivity relationship at the molecular level is believed to be useful in tuning the chemical composition of reported surrogate fuel models. This work proposes an approach to predict a component fraction of a RP-3 surrogate fuel model with a combined method of ReaxFF molecular dynamics (MD) simulations and machine learning. There are four major steps to get a refined surrogate fuel model on the basis of parent RP-3 fuel models with two, three, or four components. Step 1 helps to prepare chemical reactivity data as the input of machine learning. The chemical reactivity data are described by the oxidation reactions in terms of dynamic species concentration with time that were prepared with ReaxFF MD simulations for each derived fuel model generated from the RP-3 parent fuel model by randomly changing its component fraction. Step 2 fits a component fraction prediction model between a single surrogate component fraction and its chemical reactivity data among the common reaction space in oxidation of possible RP-3 surrogates and a 45-component RP-3 fuel with the machine-learning method. The best performance model of LightGBM was selected among the machine-learning models of linear regression, support vector regression, and LightGBM based on the training error evaluation. Each refined component fraction of RP-3 surrogate models was predicted one by one using the trained LightGBM model with the input of dynamic species concentration data of the 45-component RP-3 fuel model better representing real RP-3 fuel. Step 3 helps to select one refined surrogate model among the predicted surrogate models with two, three, or four components by comparing the chemical reactivity deviation of important species with additional ReaxFF MD simulations under the conditions of heat-up, isothermal oxidation, and isothermal pyrolysis. The optimal model of the refined three-component RP-3 surrogate is validated in step 4 where its predicted ignition delay time is found to be closer to the reported experimental data of the real RP-3 fuel than to its parent surrogate fuel model. This work suggests that the proposed computational approach by combining ReaxFF MD simulations and machine learning should be potentially useful in search for refined RP-3 chemical surrogate fuel models directly on the basis of chemical reactivity data in oxidation at the molecular level.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c01491?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c01491</a>.Fuel composition of the derived surrogate models; error analysis for the ignition delay time; and comparison of the ignition delay time at equivalence ratio of 1 between the experimental data of real RP-3 fuel, and that of the optimal RP-3 surrogate model and its parent RP-3 model calculated with CHEMKIN (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c01491/suppl_file/ef0c01491_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

An “artificial” activity coefficient modeling approach for emulating combustion and physical property variations during distillation of real complex fuel

A Functional-group Based “artificial” Activity Coefficient Model for Droplet Evaporation (AACM-DE) of Complex Fuel

Variation of Gas Phase Combustion Properties of Complex Fuels During Vaporization: Comparison for Distillation and Droplet Scenarios

Evolution of Liquid and Gas Phase Functional Groups During the Distillation Process of an Aviation Fuel

Development of a New Jet Fuel Surrogate and Its Associated Reaction Mechanism Coupled with a Multistep Soot Model for Diesel Engine Combustion

Development of a Reduced Four-Component (Toluene/n-Heptane/iso-octane/ethanol) Gasoline Surrogate Model

Surrogate Formulation for Marine Diesel Considering Some Important Fuel Physical–Chemical Properties

Development of Physical-Chemical Surrogate Models and Skeletal Mechanisms for the Combustion Simulation of Several Jet Fuels

Formulation of a Jet Fuel Surrogate and Its Kinetic Chemical Mechanism by Emulating Physical and Chemical Properties of Real Jet Fuel

Detailed combustion chemical mechanism for surrogates of representative jet fuels

Refining Fuel Composition of RP-3 Chemical Surrogate Models by Reactive Molecular Dynamics and Machine Learning

Development and validation of a detailed kinetic model for RP-3 aviation fuel based on a surrogate formulated by emulating macroscopic properties and microscopic structure

Surrogate Fuels for RP-3 Kerosene Formulated by Emulating Molecular Structures, Functional Groups, Physical and Chemical Properties

An Experimental and Kinetic Modeling Study of a Four-Component Surrogate Fuel for RP-3 Kerosene

Comparison of RP-3 Pyrolysis Reactions Between Surrogates and 45-Component Model by ReaxFF Molecular Dynamics Simulations

Development and Validation of Surrogates for RP-3 Jet Fuel Based on Chemical Deconstruction Methodology

Machine Learning-Based Identification Strategy of Fuel Surrogates for the CFD Simulation of Stratified Operations in Low Temperature Combustion Modes

A New Detailed Kinetic Model for Surrogate Fuels: C3MechV3.3

Simulating Combustion of Practical Fuels and Blends for Modern Engine Applications Using Detailed Chemical Kinetics

Development of a 5-Component Gasoline Surrogate Model Using Recent Advancements in the Detailed H2/O2/CO/C1-C3 Mechanism for Decoupling Methodology

C4+ Surrogate Models for Thermophysical Properties of Aviation Kerosene RP-3 at Supercritical Pressures