Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

A Functional-group Based “artificial” Activity Coefficient Model for Droplet Evaporation (AACM-DE) of Complex Fuel

An “artificial” activity coefficient modeling approach for emulating combustion and physical property variations during distillation of real complex fuel

Variation of Gas Phase Combustion Properties of Complex Fuels During Vaporization: Comparison for Distillation and Droplet Scenarios

Different Spray Droplet Evaporation Models for Non-Ideal Multi-Component Fuels with Experimental Validation

Large eddy simulation of spray evaporation characteristics of alcohol-based fuels based on modified evaporation model with UNIFAC

An improved non-equilibrium multi-component evaporation model for blended diesel/alcohol droplets and sprays

Multi-component Droplet Evaporation Model Incorporating the Effects of Non-Ideality and Thermal Radiation

Development of a New Jet Fuel Surrogate and Its Associated Reaction Mechanism Coupled with a Multistep Soot Model for Diesel Engine Combustion

Development of an Improved Hybrid Multi-Component Vaporization Model for Realistic Multi-Component Fuels

Functional Group Analysis of Evaporation and Liquid Combustion of Jet-A and Its Surrogate Fuel Based on Quantitative FT-IR Measurements

Development of Physical-Chemical Surrogate Models and Skeletal Mechanisms for the Combustion Simulation of Several Jet Fuels

A new robust modeling strategy for multi-component droplet heat and mass transfer in general ambient conditions

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

A numerical framework for modeling evaporation and combustion of isolated, spherically-symmetric, multi-component fuel droplets

Intelligent Quantitative Assessment on the Spray Performance of Alternative Aviation Fuel

Kinetic Modeling of Surface Deposition for Air-Saturated and Oxygen-Free Aviation Fuels

Application of droplet motion and evaporation model in fuel spray in the constant volume bomb

Multi-timescale and Correlated Dynamic Adaptive Chemistry Modeling of Ignition and Flame Propagation Using a Real Jet Fuel Surrogate Model

A New Detailed Kinetic Model for Surrogate Fuels: C3MechV3.3

Evolution of Liquid and Gas Phase Functional Groups During the Distillation Process of an Aviation Fuel

A Priori and a Posteriori Studies of a Novel Spray Flamelet Tabulation Methodology Considering Evaporation Effects