Abstract:Experimental techniques such as the cone calorimeter, representing realistic fire conditions, and the thermogravimetric analyser (TGA) combined with evolved gas analysis (EGA) can be used to determine flammability and degradation properties of materials. The desire is to correlate the flammability properties measured in the cone calorimeter for samples of size 100mm×100mm with those measured or deduced from TGA combined with EGA for milligram samples. Such an achievement will allow the design of fire-safe materials by quickly assessing (a) the fire safety of materials in their earliest milligram formulation and (b) the dependence of their flammability properties on the molecular structure of the material. In the present study, a cone calorimeter and TGA investigation is conducted for commercial Nordic Spruce wood impregnated by mono-ammonium phosphate (fire retardant, FR) through a vacuum pressure method. Experiments in the cone calorimeter with increasing FR concentrations indicated that (a) the char yields increased, (b) the apparent ignition temperature increased, (c) time to piloted ignition increased, (d) the total amount of heat released was reduced, (e) the peak heat release rate was reduced and (f) the carbon monoxide and smoke yields increased especially before ignition occurred. By comparison, char yields also increased with FR content in the TGA degradation experiments in nitrogen. The increase in the char yield with FR content explains quantitatively the decrease in the heat release in the cone calorimeter. By contrast, the onset temperatures measured in TGA decreased, whereas the ignition temperature deduced in the cone calorimeter increased with FR content. This difference is attributed to reduced yield of levoglucosan (reported in recent literature using TGA/EGA) with increased char yield as well as to the presence of phosphorous containing moieties in the volatiles, which both can quench piloted ignition. Finally, the TGA measurements showed that the FR concentrations decreased for milligram samples at different distances from the surface of the wood used in the cone calorimeter measurements. The variation of FR retardant with depth needs to be considered when using TGA data to interpret cone calorimeter measurements and the fire performance of the FR wood in approval tests such as the single burning item (SBI).

Effects of Oxygen Concentration on the Reaction to Fire of Cross-Laminated Timber in a Controlled-Atmosphere Cone Calorimeter

Wood-burning processes in variable oxygen atmospheres: Thermolysis, fire, and smoke release behavior

Full-Scale Fire Experiments on Cross-Laminated Timber Residential Enclosures Featuring Different Lining Protection Configurations

Experimental and Numerical Analysis of Residual Load-Carrying Capacity of Cross-Laminated Timber Walls after Fire

Flamelet LES of a 40 Kwth Pulverized Torrefied Biomass Furnace in Air and Oxy-Fuel Atmospheres

Kinetic Study on Pyrolysis and Combustion of Wood under Different Oxygen Concentrations by Using Tg-Ftir Analysis

Effect of protective cladding on the fire performance of vertically loaded cross-laminated timber (CLT) wall panels

Flammability assessment of fire-retarded Nordic Spruce wood using thermogravimetric analyses and cone calorimetry

The Structural Behaviour of Cross-Laminated Timber Rib Panels in Fire

Experimental Investigation and Numerical Modelling of the Fire Performance for Epoxy Resin Carbon Fibre Composites of Variable Thicknesses

Experimental and Numerical Studies on the Fire Performance of Thin Sustainable Wood-Based Laminated Veneers

Review of fire experiments in mass timber compartments: Current understanding, limitations, and research gaps

Numerical Simulation of Fire Spread in a Large-Scale Open CLT Compartment

Residual compressive load-carrying capacity of cross-laminated timber walls after exposed to one-side fire

Experimental and numerical analysis on fire behaviour of loaded cross-laminated timber panels

Experimental Study on Ignition and Combustion Characteristics of Fibre-Reinforced Phenolic Composite

Evaluation of Oxygen Concentration on Low-Temperature Oxidation Kinetics of Long-Flame Coal

Experimental investigation of structural failure during the cooling phase of a fire: Timber columns

Experimental and Analytical Studies of the Toxicity of Combustion Products, Detection and Extinguishing of Fires in the Pressurized Pressure Chambers in Environments Enriched with Oxygen and at the Alevated Pressure

Effect of Oxygen Concentration on Combustion Characteristics of Typical Biomass Materials

A TGA–DSC-based study on macroscopic behaviors of coal–oxygen reactions in context of underground coal fires