Abstract:Lead ions (Pb 2+ ) are among the most prevalent toxic heavy-metal pollutants in daily human life, particularly in children and pregnant women. Although atomic absorption spectroscopy is the most commonly used method owing to its accuracy and reliability, it requires complex sample preparation and expensive equipment. Therefore, efficient detection of Pb 2+ is currently the focus of optical sensing research. In this study, we develop a reflective fiber-optic interferometric sensor to detect trace levels of lead ions. The sensor is composed of a single -mode fiber, no -core fiber (NCF), and thincore fiber (TCF). When light from the broadband light source is transmitted to the sensor via ports 1 and 2 of the fiber optic circulator, the light diverges and propagates forward in the NCF. Owing to the fiber -core mismatch of different optical fibers, the beams can excite the core and cladding modes in the TCF. When the beams are reflected back into the NCF, the core and cladding modes can effectively interfere in the NCF due to their optical path differences. Subsequently, the light signal is recorded by an optical spectrum analyzer through port 3 of the circulator. The TCF's cladding is partially etched and coated with a functionalized hydrogel-sensing film made of 2-hydroxyethyl methacrylate (2-HEMA) as the recognition monomer. The oxygen atoms in the 2-HEMA are specifically matched with Pb 2+ to form "-O-Pb-O-" cross -linked structures. Therefore, the absorption of Pb 2+ by the hydrogel can change the effective refractive index of a new cladding of the TCF, formed by the sensing film and the TCF's original cladding, thereby the Pb 2+ concentration is detected by the change of the optical signal. Owing to the trace levels of the detected Pb 2+ in aqueous solutions (in the ppt range), we employ an equation system to eliminate temperature interference and ensure accurate detection results under environmental temperature fluctuations. Additionally, for the same sensing length, the concentration sensitivity of fiber-optic sensors with reflective structures is twice that of the transmission structures, and the reflective structure is convenient for real-time remote detection. The experimental results show that the optimal sensitivity of the sensor is 1.926 x 10 9 nm center dot mol -1 center dot L, and its detection limit can reach 2.0 x 10 -11 mol center dot L -1 (4.14 ppt, 1 ng center dot L -1 = 1 ppt), which is far lower than the standard (10 ppb, 1 mu g center dot L -1 = 1 ppb) set by the World Health Organization. Moreover, the sensor exhibits good stability, specificity, and a wide detection range. Consequently, the designed reflective fiber optic sensor can provide broad prospects for environmental and human health monitoring.

High Selective Detection of Trace Lead Ions via Substitution‐triggered Chemiluminescence Enhancement

Electrochemiluminescence-based detection method of lead(ii) ion via dual enhancement of intermolecular and intramolecular co-reaction.

Label-free Detection of Sub-Nanomolar Lead(ii) Ions in Aqueous Solution Using a Metal-Based Luminescent Switch-on Probe.

Highly Sensitive and Highly Selective Lead Ion Electrochemical Sensor Based on Zn/Cu-BTC-NH2 Bimetallic MOFs with Nano-Reticulated Reinforcing Microstructure

Highly sensitive and highly selective lead ion electrochemical sensor based on Zn/Cu-BTC-NH 2 bimetallic MOFs with nano-reticulated reinforcing microstructure

“Turn-On” Chemiluminescence Sensor for the Highly Selective and Ultrasensitive Detection of Hg2+ Ions Based on Interstrand Cooperative Coordination and Catalytic Formation of Gold Nanoparticles

Exploring a Novel, Sensitive, and Efficient Pb2+ Electrochemical Sensing Strategy Based on Cu-MOF

A Fluorescence Sensor for Pb 2+ Detection Based on Liquid Crystals and Aggregation-Induced Emission Luminogens

A multifunctional probe for lead(II) sensing using CdSe/ZnS-luminol-conjugated Fe<sub>3</sub>O<sub>4</sub> magnetic nanocomposites

A Fluorescence Sensor for Pb2+ Detection Based on Liquid Crystals and Aggregation-Induced Emission Luminogens.

Functionalized Reflective Structure Fiber-Optic Interferometric Sensor for Trace Detection of Lead Ions

Ultrasensitive and Portable Assay for Lead(II) Ions by Electronic Balance as a Readout.

Rapid Detection Of Lead Ion (Ii) Based On Cationic Conjugated Polymer And Aptamer

Ksp-Manipulated Multielement-Hybridized Carbon Nanodots Aggregation for Facile Ultra-Sensitive Detection and Efficient Selective Removal of Lead Ion

A novel "on-off-on" electrochemiluminescence strategy based on RNA cleavage propelled signal amplification and resonance energy transfer for Pb 2+ detection

Facile Colorimetric Sensing of Pb2 + Using Bimetallic Lanthanide Metal-Organic Frameworks As Luminescent Probe for Field Screen Analysis of Lead-Polluted Environmental Water

Simple and sensitive lead ion detection based on difference of gold monomer ratio using dark field microscope as readout system

All-sealed paper-based electrochemiluminescence platform for on-site determination of lead ions

One-step Electrochemical Sensor Based on an Integrated Probe Toward Sub-Ppt Level Pb2+ Detection by Fast Scan Voltammetry.

Chemiluminescence Detection of Lead (II) Using ‘8–17’ DNAzyme and Hemin/g-Quadruplex with High Sensitivity and Selectivity

Electrochemiluminescence Resonance Energy Transfer System: Mechanism and Application in Ratiometric Aptasensor for Lead Ion.