Abstract:Inertial sensors are key components of gravitational wave observations and Earth geodesy missions. An inertial sensor includes an isolated free-floating test mass (TM) surrounded by capacitive electrodes and a housing frame (EH) to perform the relative-position measurement and control the TM in six degrees of freedom. Owing to galactic cosmic rays and solar energetic particles, many additional accelerations are introduced through the Coulomb interaction between charged TMs and their surrounding conducting surfaces. Thus, the TM charge control is critical in space-based missions. A contact-free and ultraviolet light-based charge management system (CMS) was developed to reduce charge-induced noises acting on the TMs and minimize force disturbances that can perturb measurements or interrupt science tasks. However, the operating environment for space charge control is full of uncertainties and disturbances. Physical parameters in the discharging process are rarely measured and will vary owing to changes in solar activity, temperature, and so on. The unpredictability and variability of these parameters affects the CMS performance in long-term space missions and must be evaluated or eliminated. This paper presents a simplified physical model for the discharge process based on electron exchange between the TM and the opposing EH. Subsequently, a model reference adaptive control (MRAC) is proposed for the CMS with parametric uncertainties to maintain the TM charge below a certain level and improve its robustness. The simulation results show that the MRAC can automatically adjust control parameters to eliminate the effect of the variability of the aforementioned physical parameters, and the control precision can reach 0.1 mV under uncertainties, which is superior to that of a classic proportional-integral-derivative controller. This study demonstrated the effects of adaptive charge control and its potential for actual applications.

Numerical modeling and experimental demonstration of pulsed charge control for the space inertial sensor used in LISA

LISA test-mass charging. Particle flux modeling, Monte Carlo simulations and induced effects on the sensitivity of the observatory

Precision charge control for isolated free-falling test masses: LISA pathfinder results

Inertial sensor surface properties for LISA Pathfinder and their effect on test mass discharging

Modeling and Performance of Contact-Free Discharge Systems for Space Inertial Sensors

Charge-induced force-noise on free-falling test masses: results from LISA Pathfinder

Charge Management for Gravitational Wave Observatories using UV LEDs

The charge management system for LISA and LISA Pathfinder

Estimation of the electrostatic effects in the LISA-Pathfinder critical test mass dynamics via the method of moments

Simulations and machine learning models for cosmic-ray short-term variations and test-mass charging on board LISA

Nano-Newton electrostatic force actuators for femto-Newton-sensitive measurements: System performance test in the LISA Pathfinder mission

New LISA dynamics feedback control scheme: Common-mode isolation of test mass control and probes of test-mass acceleration

NanoNewton electrostatic force actuators for femtoNewton-sensitive measurements: system performance test in the LISA Pathfinder mission

Low-energy electromagnetic processes affecting free-falling test-mass charging for LISA and future space interferometers

Bridging the gap between Monte Carlo simulations and measurements of the LISA Pathfinder test-mass charging for LISA

Evaluation of disturbances due to test mass charging for LISA

Adaptive Charge Control for the Space Inertial Sensor

Charging of free-falling test masses in orbit due to cosmic rays: results from LISA Pathfinder

Charging and Discharging Modeling of Inertial Sensors Based on Ultraviolet Charge Management

Ground testing and flight demonstration of charge management of insulated test masses using UV-LED electron photoemission

Charge Management in LISA Pathfinder: The Continuous Discharging Experiment