Abstract:Chemical solution deposition (CSD)-based thin-film fabrication techniques for solid electrolytes are important for accelerating the commercialization of all-solid-state lithium-ion batteries. Post-treatments, typically heat treatments at high temperatures, are applied to obtain a pure crystal structure with a dense morphology for high electrochemical performance. However, lithium evaporates at high temperatures, leading to changes in the material composition and decrease in performance. In this study, a novel rapid sintering method, namely flash-light sintering (FLS), was applied as a post-treatment for spin-coated lithium lanthanum titanate (LLTO) thin films to prevent lithium evaporation and obtain fully dense thin films with perovskite structures. The flash-light-sintered LLTO thin film exhibited negligible lithium loss with pore-free morphologies and a pure cubic perovskite structure, whereas the thermally sintered LLTO thin film exhibited significant lithium evaporation. The lithium-preserved cubic LLTO dense thin films prepared by FLS showed an outstanding total ionic conductivity of ∼6 × 10 −5 S cm −1 , the highest recorded for CSD-based LLTO thin films. We demonstrated that the FLS method could be successfully applied for LLTO thin-film fabrication while maintaining the lithium stoichiometry and ensuring a highly densified film and cubic structure, which has a higher ionic conductivity than those of structures such as tetragonal or orthorhombic unit cells. The rapid FLS method not only simplifies the fabrication of LLTO thin films but also provides opportunities for its wide application to materials containing lithium or other elements with low melting points.

Ultrafast crystallization and sintering of Li1.3Al0.3Ti1.7(PO4)3 glass through flash‐sinter Crystallization

Controllable Competitive Nanocrystallization of La3+-based Fluorides in Aluminosilicate Glasses and Optical Spectroscopy

Ultrafast crystallization and sintering of Li1.5Al0.5Ge1.5(PO4)3 glass and its impact on ion conduction

Sintering Behavior, Microstructure and Mechanical Properties of Various Fluorine-Containing Y-SiAlON Glass-Ceramics

Microstructure and ionic conductivities of NASICON-type Li1.3Al0.3Ti1.7(PO4)3 solid electrolytes produced by cold sintering assisted process

Ultra-fast high temperature sintering (UHS) of Li1.5Al0.5Ge1.5P3O12 electrolyte: A rationalization of the heating schedule

Concurrent Crystallization Mechanism Leading to Low Temperature Percolation of LAGP Glass-Ceramic Electrolyte

Ultrafast high-temperature sintering of lanthanum-chromite-based ceramics

Hydroflux-Assisted Cold Sintering: Eutectic Mixtures for Boosting Ionic Conductivity in LATP Solid-State Electrolytes

Realizing Translucency in Aluminosilicate Glass at Ultralow Temperature Via Cold Sintering Process

Li-Ion Conductive Li1.3Al0.3Ti1.7(PO4)3 (LATP) Solid Electrolyte Prepared by Cold Sintering Process with Various Sintering Additives

Insight into the Microstructure and Ionic Conductivity of Cold Sintered NASICON Solid Electrolyte for Solid-State Batteries

Effect of sintering temperature on sol–gel synthesized NASICON-type Li1.3Al0.3Ti1.7(PO4)3 ceramic solid electrolyte

Achieving High Ionic Conductivity of LATP Solid Electrolyte Via LiTFSI-assisted Cold Sintering Process

Phase Evolution and Li Diffusion in LATP Solid‐State Electrolyte Synthesized via a Direct Heat‐Cycling Method

Reduced Sintering Temperatures of Li+ Conductive Li1.3Al0.3Ti1.7(PO4)3 Ceramics

Synergistic Effect of Calcination and Sintering on the Reduction of Grain Boundary Resistance of LATP Solid Electrolyte

Lithium-preserved sintering method for perovskite-based solid electrolyte thin films via flash light sintering for all-solid-state lithium-ion batteries

Ultra-fast high-temperature sintering of transparent MgAl2O4

B2O3-Doped LATP Glass-Ceramics Studied by X-ray Diffractometry and MAS NMR Spectroscopy Methods

Effect of TiO2, LiF and Cr2O3 in the Crystallization of Cristobalite and Tridymite in Sintered Glass-Ceramics