Abstract:This paper presents a numerical study on the aerodynamics loss reduction characteristics after the leading-edge (LE) optimization in a low-pressure turbine linear cascade. The LE was optimized with a simple and practical method of “Class Function/Shape Function Transformation Technique” (CST). The simulation conditions, covering the whole working range, were independently determined by incidence, Reynolds number and Mach number. Quantitative loss analyses were carried out with a loss breakdown method based on volumetric integration of entropy production rates. To understand the reason of loss reduction, the local sources at different operating points were identified with entropy production rates. The results showed that LE optimization with the CST method played a positive role in decreasing the total losses, and the working range with lower loss was extended. The profile loss and the endwall loss were significantly reduced by the LE optimization, which were also verified to be the major causes of the total loss reduction by loss breakdown. The decrease of profile loss can be attributed to the boundary layer near the LE region and the boundary layer of downstream at off-design incidence. The reduction mostly came from the pressure side at negative incidence, while came from the suction side at the positive incidence. The endwall loss was decreased markedly about 2.5%–5% by the LE optimization at the incidence of‒12°, which was 1% at the incidence of 12°. The mechanism for the endwall loss reduction at different incidences was different from each other. At negative incidence, the LE optimization diminished the corner separation vortex on the pressure side. While at positive incidence, the benefits came from three aspects, i.e., reduced suction LE separation bubbles close to the endwall, reduced passage vortex strength, and weakened shear process between passage vortex and trailing shed vortex. The loss of the downstream zone was relatively lower than that of the profile losses and the endwall losses. The effect of LE optimization on the loss of the downstream zone at different conditions was complex and it depended both on the profile boundary layer behavior at the suction trailing edge and on the passage vortex strength.

A calculation method for modeling the flow characteristics of the wind turbine airfoil with leading-edge protuberances

Investigation of leading-edge protuberances for the performance improvement of thick wind turbine airfoil1

Research on the aerodynamic performance of the wind turbine blades with leading-edge protuberances

Airfoil Parameterization Evaluation Based on a Modified PARASEC Method for a H-Darrious Rotor

Optimization Design of a Turbine Blade to Reduce Secondary Flow Loss Using a Viscous Adjoint Method

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

The numerical simulation of separated flow at large attack angles for a wind turbine airfoil

Mechanism of bionic leading-edge protuberances on the aerodynamic performance of horizontal axis wind turbine

Numerical Investigation on the Aerodynamic Performance of an Airfoil with Leading-Edge Protuberances

Numerical Evaluations Of The Effect Of Leading-Edge Protuberances On The Static And Dynamic Stall Characteristics Of An Airfoil

Numerical Analysis of Leading-Edge Roughness Effects on the Aerodynamic Performance of a Thick Wind Turbine Airfoil

Effect of a Single Leading-Edge Protuberance on NACA 634-021 Airfoil Performance

Aerodynamic modeling of wind turbine airfoil concerning dynamic stall and Gurney flap

Numerical simulation of the effects of trailing edge thickness on aerodynamic performance of low pressure turbine

A Numerical Model for the Analysis of Leading-Edge Protection Tapes for Wind Turbine Blades

Numerical Investigations of Hydrodynamic Performance of Hydrofoils with Leading-Edge Protuberances

Effect of Leading-Edge Optimization on the Loss Characteristics in a Low-Pressure Turbine Linear Cascade

Investigation of the Decisive Factor for the Effectiveness of Biomimetic Protuberances During the Stall Process

A New Flow Control and Efficiency Enhancement Method for Horizontal Axis Wind Turbines Based on Segmented Prepositive Elliptical Wings

Study on Aerodynamic Performance of a Combined Vertical Axis Wind Turbine Based on Blade Element Momentum Theorem

Large-eddy simulation of the influence of hairpin vortex on pressure coefficient of an operating horizontal axis wind turbine