Investigation of the thermal management potential of phase change material for lithium-ion battery
Haocheng Wang,Yanhong Guo,Yong Ren,Siegfried Yeboah,Jing Wang,Fei Long,Zhiyu Zhang,Rui Jiang
DOI: https://doi.org/10.1016/j.applthermaleng.2023.121590
IF: 6.4
2023-09-16
Applied Thermal Engineering
Abstract:With the rapid development of electric vehicles, lithium-ion battery has been widely used as an energy source. However, to avoid thermal runaway and to ensure the correct operation of lithium-ion battery system, effective battery thermal management would be required. In this study the capacity of phase change materials with different thermal-physical properties to respectively manage thermal issues associated with lithium-ion battery is theoretically investigated using computational fluid dynamics. The impacts of shell material, heat transfer coefficient, phase change material fill volume and the shape of the battery pack on the thermal performance of the lithium-ion battery/phase change material system are investigated in detail. The results show that when the ambient temperature was 20 °C or 30 °C, phase change material-RT35 shows the best temperature control ability for the proposed system, while the phase change material-RT50 has better thermal management capability when the ambient temperature is 40 °C. Also, higher heat transfer coefficient or shell material with higher thermal conductivity, effectively reduce the maximum temperature of the lithium-ion battery and the temperature difference within the proposed system. Specifically, the phase transition time in the lithium-ion battery/phase change material system with a heat transfer coefficient of 10 W/m 2 K is more than twice longer compared to that of 1 W/m 2 K and the maximum temperature is 47.18 °C after 150 min of charging and discharging. It is also observed that the phase change material with larger volume ratio leads to lower system temperature during phase transition and the continuous charging and discharging after completing transformation of the phase change material impacts negatively on the thermal management of the lithium-ion battery system. Besides, the rectangular lithium-ion battery/phase change material system surpasses the circular one by 14.78 °C in maximum temperature, while attaining a minimum temperature difference of 9.6 °C after 150 min of charging and discharging.
energy & fuels,engineering, mechanical,thermodynamics,mechanics