Abstract:The structural elements of buildings have recently required the development of efficient design solutions due to increased dynamic and thermal loads. The main solution for improving the efficiency of such elements involves creating lightweight non-uniform beam and arch structures from alloyed steel, which has better mechanical characteristics. The most promising approach is the use of welded beams and arches with perforated partitions and composite beams, which are often used together, for instance, as structural elements of cylindrical shells. The development of an effective cross-sectional shape for perforated beams and crane girders is considered, taking into account the strength, local stability, resistance to flat bending, and fatigue deformation. It has been shown that the effective form for perforated beams is a box-shaped structure made of perforated shvellers. Calculations for selecting a rational design from the assortment of hot-rolled shveller profiles have demonstrated that a significant reduction in the weight of the structure can be achieved by using the proposed cross-sectional shape. An evaluation of the fatigue strength of composite metal crane girders operating in harsh conditions has shown the effectiveness of using hot-rolled I-beams as their upper flange, as well as the necessity of using hot-rolled I-beams to ensure strength in their lower part. When choosing the rational parameters of an arch design, multiple recalculations of its bending with respect to technological cutouts in the thickness are necessary; hence, simplified calculation schemes are commonly used. Some authors simplify this process by replacing an arch with a cutout with a solid arch reduced in height by the cutout radius. We have shown that this model does not accurately describe the actual distribution of forces and displacements, leading to inadequate results. We have developed a simplified methodology for the preliminary calculation of a circular arch with a cutout, which includes correction coefficients calculated by us. A calculation of the flat stress–strain state of an elastic circular metal arch with a central semicircular cutout under various ratios of design parameters and uniform external pressure was conducted. A dependence of the stress concentration coefficient at the cutout's apex on the ratio of the cutout radius and arch thickness was obtained. These results can be generalized for reinforced non-uniform shells and for the fuzzy application of external influences.

Engineering methodology for calculation of corrugated beams for bending and torsion. Flat bend form stability

TORSIONAL DEFORMATION CALCULATION OF LARGE SPAN THIN-WALLED STEEL BOX GIRDER WITH OPEN SECTION

Simplified calculation for the stiffness of R.C. simple-supported cracked beams under uniform loads

Computation of Local Bearing Stress in Web of Beams Supporting Overhead Cranes

Experimental Investigation of Circular Steel Tubes with Tapered Ends Subjected to Bending,compression and Torsion

EXPERIMENTAL STUDY ON CENTRIFUGAL CONCRETE-FILLED STEEL TUBES UNDER BENDING AND TORSION

CALCULATING METHOD OF TORSION-BENDING ANALYSIS OF SIMPLY SUPPORTED STRAIGHT CONCRETE BEAMS ON RAILWAY CURVE

Study of the Behavior of Square Concrete-Filled CFRP Steel Tubular under a Bending-Torsion Load

Calculation of deflections of bent reinforced concrete elements on the basis of a nonlinear deformation model taking into account the forces of adhesion of reinforcement with concrete

STRESS-STRAIN STATE OF BENT REINFORCED CONCRETE ELEMENTS OF CONTINUOUS AND COMPOSITE CROSS-SECTION BASED ON A REFINED NONLINEAR CALCULATION METHOD

Numerical calculation of bent reinforced concrete elements of rectangular section in the Abaqus software

Perforated and Composite Beam and Arch Design Optimization during Asymmetric Post-Buckling Deformation

Lateral-torsional Buckling Resistance of Aluminium I-beams

Study Of Restrained Torsion Of Thin-Walled Open-Section Beams Using The Asymptotic Splitting Method

METHOD OF CALCULATING THE PARAMETERS OF THE STRESSED AND DEFORMED STATE OF CRANE SCALE PLATES

DESIGN METHODS AND EXPERIMENTAL STUDY ON THE STABILITY BEHAVIOR OF TAPERED BEAM-COLUMNS WITH SINUSOIDAL CORRUGATED WEB

CROSS SECTIONAL SHEAR STRAIN DISTRIBUTION OF RECTANGULAR CONCRETE FILLED STEEL TUBE COLUMNS SUBJECTED TO TORSION

Nonlinear Finite Element Analysis of Corrugated Steel Web Composite Beam Based on ABAQUS

Features of Nonlinear Calculation of Bending Rods Partially Supported on Elastic Foundation

CALCULATION METHOD ON MOMENT-ROTATION CURVES OF BEAM-TO-COLUMN SEMIRIGID END-PLATE CONNECTIONS

A Method of Constitutive Experiment for Accurate Description of Tube Performance under Rotary-Draw Bending