Abstract:As high power pulse magnetron sputtering (HPPMS) technology is becoming popular in cutting tool industry, the development of nanocomposite coating systems such as TiAlCrSiN with this technology presents a new research avenue. Hereby, the combined effect of Cr and Si contents on properties and cutting behavior of high Al content TiAlCrSiN HPPMS coatings needs further investigation. For this purpose, three HPPMS coatings with Al/Ti ratio x = 1.4–1.5 and varying Cr + Si content, namely (Ti 28 Al 40 Cr 16 Si 16 )N, (Ti 30 Al 43 Cr 17 Si 10 )N and (Ti 36 Al 54 Cr 5 Si 5 )N, were deposited on cemented carbide substrates. In addition to basic characterization, the fracture behavior of the coatings was characterized by scratch tests. The cutting behavior of the coated inserts was exemplarily investigated during dry cutting of normalized medium carbon steel C45 with cutting speed v c = 80 m/min, feed rate f = 0.12 mm and cutting depth a p = 0.8 mm. The tool damage over the cutting time of t c = 35–40 min, as per the tool condition, was observed using light microscopy. Moreover, the damage mechanisms were analyzed in detail at the end of the cutting test using scanning electron microscopy. All coatings showed comparable indentation hardness H IT and indentation modulus E IT . However, an increased Cr + Si content amplified the brittle fracture of the coating under sliding load of scratch test. Moreover, the workpiece material C45 showed a higher adhesion tendency to cutting insert with high Cr + Si content TiAlCrSiN coatings during cutting tests. The tool wear and built-up edge formation increased due to the combined effect of workpiece adhesions and amplified brittle fracture of the coating at considered cutting speed. On the other hand, the inserts with low Cr + Si content coating exhibited better cutting performance and reduced built-up edge formation based on the improved fracture behavior of the coating and lower adhesion tendency of workpiece material to the corresponding coated insert.

Study on noise behavior of micro-textured composite coated cemented carbide surface grinding titanium alloy based on HHT analysis

Application of Magnetron Sputter Ion Plated CrAlTiN Composite Coating in Improving Wear Resistance of Milling Cutter

Analysis of Wear Vibration Behavior of Micro-Textured Coated Cemented Carbide Considering High-Order Scale

Effect of laser texturing process on properties of composite coated cemented carbide ball-end milling cutter milling titanium alloy

Effect of Surface-Textured AlSiTiN Coating Parameters on the Performance of Ball-End Milling Cutter in Titanium Alloy Milling

Study on the surface performance strengthening of AlCrN coated cemented carbide by micro-texture laser preparation process

Study on the Orthogonal Cutting Process of Al7050T7451 with Uncoated and Coated Tools

Optimization of Micro-Texturing Process Parameters of TiAlN Coated Cutting Tools by Femtosecond Laser

Machining performance of micro-pit and micro-groove composite textured tools in tungsten alloy turning

Research on surface integrity of titanium alloy in V-groove micro-textured ball-end milling cutter

Effects of PVD CrAlN/(CrAlB)N/CrAlN Coating on Pin–Disc Friction Properties of Ti2AlNb Alloys Compared to WC/Co Carbide at Evaluated Temperatures

Study on the effect of texture on cutting performance of the coated tool with finite element analysis and experimental method

Statistical Analysis of the Effect of the Cutting Tool Coating Type on Sustainable Machining Parameters

Novel Approach to Monitoring the Surface Integrity of Aluminum 5052 Using Sound and Vibration Signals during Turning with Titanium-Coated Carbide Inserts

Influence of Cr + Si content variation on cutting behavior of TiAlCrSiN HPPMS coatings

Study on milling behavior of TiAlN coated tool with variable distribution density micro-texture

Investigation of the wear characteristics of microcrystal alumina abrasive wheels during the ultrasonic vibration-assisted grinding of PTMCs

Inhibitory Effect of Laser Surface Texturing in Dry Cutting of Titanium Alloy on Cemented Carbide Tool Wear

Effect of high-speed ultrasonic vibration cutting on the microstructure, surface integrity, and wear behavior of titanium alloy

Analysis of synergistic friction reduction effect on micro-textured cemented carbide surface by laser processing

Preparation and Cutting Performance of Nanoscaled Al2O3-coated Micro-Textured Cutting Tool Prepared by Atomic Layer Deposition