Abstract:Studies on self-driving vehicles have become a trend in recent years, and many systems have been developed to enable autonomous manoeuvre. Various methods have been used to improve path-tracking algorithms which increase vehicle performance, including tracking accuracy and stability. Path tracking is one of the primary problems for autonomous vehicles where the vehicle deviates from target paths, which leads to unnecessary counter-correction. Conventional front wheel steering is unable to satisfy the manoeuvre with a high lateral acceleration since the front steering angle is limited in accurately responding to vehicle dynamics. Moreover, the characteristics of front wheel steering vehicles affect handling stability due to the fact that the turning radius is larger than the vehicle itself. This disadvantageous can compromise safety during under-steer and over-steer situations. The main objective of this preliminary study is to investigate the performance of a four-wheel steering system (4WS) in path tracking for autonomous vehicles using a classical model predictive controller (MPC). Conventional two-wheel steering (2WS) tracking performance following the desired driving system with the same MPC controller is compared with 4WS vehicles. The driving system is developed using Driving Scenario Designer to extract the desired yaw angle and lateral position for controller references constructed in Matlab Simulink. Fixed MPC constraint, prediction, control horizon, yaw angle and lateral position weights were used to compare the performance between 2WS and 4WS vehicles. The simulation results show that 4WS is three times better than 2WS vehicles in tracking predetermined paths. 4WS vehicle show 74.55% better performance in lateral position tracking and 68.75% better performance in trailing predetermined yaw angle value. The simulation data from the preliminary study will be used as a guideline to develop an advanced controller of 4WS vehicles.

Front wheel angle control for steering system of intelligent commercial vehicle based on model predictive control

Integrated control of in-wheel-motored electric vehicles using a model predictive control method

Front Wheel Angle Tracking Control Research of Intelligent Heavy Vehicle Steering System

MPC-based Yaw Stability Control in In-Wheel-motored EV Via Active Front Steering and Motor Torque Distribution

A Linear Time-Varying MPC Method for Vehicle Path-Following Assistance Based on Steering Torque

Adaptive Robust Control of Multi-Axle Vehicle Electro-Hydraulic Power Steering System With Uncertain Tire Steering Resistance Moment

Application of Data-Driven Model Predictive Control for Autonomous Vehicle Steering

A Smooth Angle Velocity Active Return-to-Centre Control Based on Single Neuron PID Control for Electric Power Steering System

Enhancing Vehicle Braking Performance on U-Split Road Through Active Steering Intervention

Electric motor steer-by-wire angle tracking by proportional differential sliding mode controller with disturbance observer

Integrated Control of Active Front Wheel Steering and Active Suspension Based on Differential Flatness and Nonlinear Disturbance Observer

Model-Predictive-Control-Based Path Tracking Controller of Autonomous Vehicle Considering Parametric Uncertainties and Velocity-Varying

A model predictive control approach for angle tracking of steer‐by‐wire system with nonlinear transmission ratio

A Model-Tuned Predictive Backstepping Control Approach for Angle Following of Steer-by-Wire

Research on the Potential of Front Wheel Steering Control for Vehicle Dynamics Control

Model Predictive Control of Steering Torque in Shared Driving of Autonomous Vehicles.

Adaptive control of dual-motor autonomous steering system for intelligent vehicles via Bi-LSTM and fuzzy methods

An Investigation of Classical Model Predictive Controller Path Tracking Performance of a Two-Wheel and Four-Wheel Steering Vehicle

Optimal path tracking control for intelligent four-wheel steering vehicles based on MPC and state estimation

Lateral Stability Control for Intelligent Commercial Vehicle Based on Reconstructed Objective Function Method

Model predictive control for integrated longitudinal and lateral stability of electric vehicles with in‐wheel motors