Lateral Stability Control for Intelligent Commercial Vehicle Based on Reconstructed Objective Function Method

Yafei Li,Yiyong Yang,Xiangyu Wang,Chengbiao Wang
DOI: https://doi.org/10.3390/act13040134
IF: 2.6
2024-04-09
Actuators
Abstract:In this paper, a novel electric-hydraulic power steering (EHPS) system and a vehicle stability coordination control algorithm are proposed which can not only ensure the accuracy of the trajectory tracking but also solve the coordination control problem between the stability of the lateral control and the stability of the roll in the extreme condition. Firstly, the EHPS system is designed to provide accurate control input of front wheel angle for vehicle lateral dynamics control. Secondly, on the basis of optimal preview theory, a new trajectory tracking fusion controller combined with sliding mode control is proposed to improve the accuracy and stability of the system in the process of vehicle lateral trajectory tracking control. Then, the stability domain boundary function of the phase plane is determined according to the phase plane of the sideslip angle-yaw rate, and the stability margin of the phase plane is calculated during the steering process. Finally, considering the tracking accuracy, lateral stability and roll stability performance in the process of trajectory tracking, the linear weighted algorithm is used to coordinate above three objectives, and the HIL bench test and real vehicle experiment verify that the proposed algorithm has good reliability and effectiveness.
engineering, mechanical,instruments & instrumentation
What problem does this paper attempt to address?
The problems that this paper attempts to solve are: during the automatic driving of intelligent commercial vehicles, how to ensure the accuracy of vehicle trajectory tracking and improve lateral stability and roll stability, especially under extreme conditions. Specifically, the article proposes a new electro - hydraulic power steering (EHPS) system and a vehicle stability coordinated control algorithm, aiming to solve the following problems: 1. **Trajectory tracking accuracy**: Ensure that the vehicle can accurately travel along the predetermined trajectory, especially in the autonomous driving mode. 2. **Lateral stability**: When the vehicle is making lateral movements (such as turning), maintain the vehicle's lateral stability and prevent sideslip or out - of - control. 3. **Roll stability**: When the vehicle is making lateral movements, control the vehicle's roll angle and prevent the vehicle from rolling over. To achieve these goals, the article proposes the following key technologies and methods: - **New electro - hydraulic power steering (EHPS) system**: An EHPS system that can provide precise front - wheel steering angle control input is designed to achieve vehicle lateral dynamic control. - **Fusion controller based on optimal preview theory**: Combined with sliding mode control (SMC), a new trajectory - tracking fusion controller is proposed to improve the accuracy and stability of vehicle lateral trajectory - tracking control. - **Phase - plane stability boundary function**: The stability boundary is determined according to the phase - plane of side - slip angle - yaw rate, and the phase - plane stability margin during the steering process is calculated. - **Multi - objective linear weighted algorithm**: Considering trajectory - tracking accuracy, lateral stability and roll stability comprehensively, a multi - objective coordinated control strategy is proposed. Verified by the hardware - in - the - loop (HIL) test platform and real - vehicle experiments, the proposed algorithm has good reliability and effectiveness and can ensure the vehicle's trajectory - tracking accuracy and stability under complex working conditions. In summary, this paper mainly solves the difficult problems of trajectory - tracking and stability control of intelligent commercial vehicles during autonomous driving and provides new solutions for improving the safety and stability of vehicles.