Abstract:Precise tailoring of nanostructured cobalt ferrite paves the way to design and develop devices for stress and noncontact torque sensors. Herein, Mn2+ ions are inserted into cobalt ferrite with different ratios using a facile sol–gel method. The as-synthesized ferrites are characterized via energy dispersive X-ray (EDX), Fourier transforms infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), high resolution transmission electron microscope (HR-TEM), thermogravimetric analysis (TGA), electrochemical impedance spectroscopy (EIS), and vibrating sample magnetometer (VSM). EDX analyses affirm the stoichiometry of the synthesized samples with the intended ratios. The FTIR and XRD prove the presence of a single-phase cubic spinel structure for all as-synthesized samples. The dislocation, the inter-chain distance and the distortion parameter values decrease with increasing Mn2+ content, which outweigh the improvement of the crystal structure of the doped CFO samples. SEM micrographs illustrate that the incorporation of Mn2+ significantly soars the porosity of the samples. TEM images reveal that the samples comprise particles in the nanometer range with spherical shape and porous nature. Thermal analyses show that the weight loss is dependent on Mn2+ content in the sample. For instance, at x = 0, a slight variation in the weight loss estimated by 8% is observed while at x = 0.25 the weight loss has reached up to 40%. The dielectric losses (8 × 105) of Co0.5Mn0.5 Fe2O4 is enough to meet the demands of microwave applications. Finally, a reduction in the magnetization of the pure CFO from 68.419 emu g−1 to 50.307 emu g−1 is achieved at x = 0.25.Herein, manganese substituted cobalt ferrites were synthesized using a facile sol–gel method. The Rietveld refinements of Co1-xMnxFe2O4 have studied. SEM images have indicated that the surface of the as-synthesized NPs has some porous shapes. EDX analyses have affirmed the stoichiometry of the samples. The TEM image reveals that particles are in the nanometer range. Thermal analyses show that the weight loss is dependent on Mn2+ content in the sample. The dielectric losses (8 × 105) of Co0.5Mn0.5 Fe2O4 is enough to meet the demands of microwave applications. The hysteresis loops reveal that the magnetic behavior of the CFO NPs is significantly influenced by Mn2+ ions substitution.

Effective enhancement of piezomagnetic effect in core/shell structured cobalt/manganese-zinc nanocomposite

Large Enhancement of Gmi Effect in Polymer Composites Containing Co-Based Ferromagnetic Microwires

Magnetic Properties of ZnO-doped Cobalt Ferrite

Scanning probe microscopy study of cobalt ferrite-barium titanate coreshell magnetoelectric nanoparticles

Colossal Magnetoelectric Effect in Core–Shell Magnetoelectric Nanoparticles

Enhanced Magnetoimpedance Effect in Co-Based Micron Composite CoFeNiSiB Ribbon Strips Coated by Carbon and FeCoGa Nanofilms for Sensing Applications

Improvement on the magnetic and dielectric behavior of hard/soft ferrite nanocomposites

Optimizing energy storage and magnetoelectric performance through core–shell engineering: A study on Ni0.5Co0.5Fe2O4-BaTiO3 multiferroic composite materials

Magnetoelectric coupling in multiferroic CFO/BCTSn core shell nanofibers elaborated by co-axial electrospinning method

Complex magnetoelectric effect in PFN-PT/CoFe$_{2-x}$Zn$_x$O$_4$ bulk particulate composites

Enhanced Magnetoelectric Coefficient and Interfacial Compatibility by Constructing a Three-Phase CFO@BT@PDA/P(VDF-TrFE) Core-Shell Nanocomposite

Magnetic-field-induced dielectric behaviors and magneto-electrical coupling of multiferroic compounds containing cobalt ferrite/barium calcium titanate composite fibers

Enhancement of local piezoresponse in samarium and manganese co-doped bismuth ferrite ceramics

Magneto-ionic control of magnetism in two-oxide nanocomposite thin films comprising mesoporous cobalt ferrite conformally nanocoated with HfO2

Co-doped MOF-5 and carbon nanotube nanoparticles enhancing stability and high output performance in core-shell nanofibers for piezoelectric nanogenerators

High Magnetic Performance of Cobalt Ferrite and Anomalous Magnetizing Behavior of Cofe2/Oxide Derived from Ferrite

Incorporation of Mn2+ into cobalt ferrite via sol–gel method: insights on induced changes in the structural, thermal, dielectric, and magnetic properties

Enhanced Curie Temperature and Magnetoelectric Effects in the BaTiO3-based Piezoelectrics and CoFe2O4 Laminate Composites

Near-zero magnetostriction in magnetostrictive FeCo alloys

Modeling of core-shell magneto-electric nanoparticles for biomedical applications: Effect of composition, dimension, and magnetic field features on magnetoelectric response

Novel Biocompatible Magnetoelectric MnFe2 O4 Core@BCZT Shell Nano-Hetero-Structures with Efficient Catalytic Performance