Abstract:Failure in an epoxy polymer composite material is prone to initiate by the coalescence of microcracks in its polymer matrix. As such, matrix toughening via addition of a second phase as rigid or/and rubber nano/micro-particles is one of the most popular approaches to improve the fracture toughness across multiple scales in a polymer composite, which dissipates fracture energy via deformation mechanisms and microcracks arrest. Few studies have focused on tailorable and variable toughening, so-called 'active toughening', mainly suggesting thermally induced strains which offer slow and irreversible toughening due to polymer's poor thermal conductivity. The research presented in the current article has developed an instantaneous, reversible extrinsic strain field via remote electromagnetic radiation. Quantification of the extrinsic strain evolving in the composite with the microwave energy has been conducted using in-situ real-time fibre optic sensing. A theoretical constitutive equation correlating the exposure energy to micro-strains has been developed, with its solution validating the experimental data and describing their underlying physics. The research has utilised functionalised dielectric ferroelectric nanomaterials, barium titanate (BaTiO 3 ), as a second phase dispersed in an epoxy matrix, able to introduce microscopic electro-strains to their surrounding rigid epoxy subjected to an external electric field (microwaves, herein), as result of their domain walls dipole displacements. Epoxy Araldite LY1564, a diglycidyl ether of bisphenol A associated with the curing agent Aradur 3487 were embedded with the BaTiO 3 nanoparticles. The silane coupling agent for the nanoparticles' surface functionalisation was 3-glycidoxypropyl trimethoxysilane (3-GPS). Hydrogen peroxide (H 2 O 2 , 30%) and acetic acid (C 2 H 4 O 2 , 99.9%) used as functionalisation aids, and the ethanol (C 2 H 6 O, 99.9%) used for BaTiO 3 dispersion. Firstly, the crystal microstructure of the functionalised nanoparticles and the thermal and dielectric properties of the achieved epoxy composite materials have been characterised. It has been observed that the addition of the dielectric nanoparticles has a slight impact on the curing extent of the epoxy. Secondly, the surface-bonded fibre Bragg grating (FBG) sensors have been employed to investigate the real-time variation of strain and temperature in the epoxy composites exposed to microwaves at 2.45 GHz and at different exposure energy. The strains developed due to the in-situ exposure at composite, adhesive and their holding fixture material were evaluated using the FBG. The domain wall induced extrinsic strains were distinguished from the thermally induced strains, and found that the increasing exposure energy has an instantaneously increasing effect on the development of such strains. Post-exposure Raman spectra showed no residual field in the composite indicating no remnant strain field examined under microwave powers < 1000 W, thus suggesting a reversible strain introduction mechanism, i.e. the composite retaining its nominal properties post exposure. The dielectric composite development and quantifications presented in this article proposes a novel active toughening technology for high-performance composite applications in numerous sectors.

Study of the Properties of Microwave Modified Basalt Fiber Reinforced Epoxy Polymer

Microwave Modification of an Epoxy Basalt-Filled Oligomer to Improve the Functional Properties of a Composite Based on It

Effect of Gamma Irradiation on Strength Properties of Basalt Composites

Basalt Fiber-Based Flame Retardant Epoxy Composites: Preparation, Thermal Properties, and Flame Retardancy

Enhanced interfacial interaction, mechanical properties and thermal stability of basalt fiber/epoxy composites with multi-scale reinforcements

Preparation, Thermal Analysis, and Mechanical Properties of Basalt Fiber/Epoxy Composites

Basalt Fiber Modified Ethylene Vinyl Acetate/Magnesium Hydroxide Composites with Balanced Flame Retardancy and Improved Mechanical Properties

Mechanical behavior of basalt fiber-reinforced and basalt fiber metal laminate composites under tensile and bending loads

Experimental Investigation on the Effects of Microwave Treatment on Basalt Heating, Mechanical Strength, and Fragmentation

Basalt Fiber-Reinforced Epoxy Laminates: Improvement in Quasi-Static and Fatigue Properties with Modified Matrices and Fiber Surfaces Using Silica Nanoparticles

Surface Modification of Carbon Fibers by Microwave Etching for Epoxy Resin Composite

Epoxy resin with both ultraviolet shielding and enhanced thermal mechanical properties: Study on synergistic modification of Ce–Zr–Si oxide nanoparticles and basalt fibers

Improvement of the Compressive Strength of Carbon Fiber/Epoxy Composites Via Microwave Curing

Electromagnetic field controlled domain wall displacement for induced strain tailoring in BaTiO3-epoxy nanocomposite

Application of Low-Coherence Reflexometry in Estimating the Effect of Microwave Electromagnetic on the Structure of Cured Polymer Composites

Microwave-Assisted Pyrolysis of Carbon Fiber-Reinforced Polymers and Optimization Using the Box-Behnken Response Surface Methodology Tool

Thermal characteristics of basalt fiber reinforced epoxy-benzoxazine composites

Uncovering the attributes of micro-size basalt powder doped epoxy composites: fabrication, characterization, and gamma attenuation properties

Study on the heating mechanism and macro/micro properties of composite materials under microwave curing

Thermal evaluation of porcelain filler particles in basalt fibre-reinforced polymer composites for thermal applications

Comparative Study of the Mechanical and Water Absorption Behaviour of Basalt Fiber Reinforced Polymer Matrix Composites with Different Epoxies as Matrix for Biomedical Applications