Abstract:Basalt fiber (BF) is an environmentally green building material; the incorporation of basalt fiber into concrete structures can contribute to improving their strength and durability. In this work, basalt fiber reinforced concrete (BFRC) was designed and prepared with eight kinds of volume fractions of BF (0%, 0.05%, 0.10%, 0.15%, 0.20%, 0.25%, 0.30%, 0.35%). The dynamic mechanical properties with various volume fractions of BF were investigated using a 75 mm-diameter split Hopkinson pressure bar (SHPB) apparatus. Based on the experimentally obtained stress-strain curves at different strain rates, the effects of volume fraction and strain rate on the dynamic compressive strength were investigated, and the dynamic constitutive law of BFRC was derived. From the microscopic point of view, by analyzing the scanning electron microscope (SEM) photographs and mercury intrusion porosimetry measurements (MIP), this paper researched the microproperties and pore structure of BFRC. The interface between the fibers and the cement was observed, and the effect of the pore size ratio on the dynamic strength of BFRC at different strain rates was analyzed. The test results showed that volume fractions of BF at 0.3% had the most significant improvement in the concrete’s compressive strength and flexural strength. At high strain rates, the specimens without BF were broken into powder form, and those with 0.3% BF were broken into small pieces. By studying the microproperties and pore structure of BFRC, the proportion of multiharmful holes was reduced, and the proportion of less harmful holes was positively correlated with the BFRC dynamic compressive strength after the incorporation of BF. The results indicate that the BF improves the compactness of the concrete and optimizes its pore structure, thus contributing to its dynamic mechanical properties.

Mechanical behavior of basalt fiber-reinforced and basalt fiber metal laminate composites under tensile and bending loads

On the bending behavior of hybrid fiber–metal laminates (HFMLs) based on aluminum and glass/Kevlar fibers reinforced epoxy

Modeling and experimental study on the mechanical behavior of glass/basalt fiber metal laminates after thermal cycling

Tensile and flexural mechanical attributes of hybrid carbon/basalt fiber metal laminates under various hybridization and stacking sequences

Experimental Study on Basic Mechanical Properties of Basalt Fiber Reinforced Concrete

Experimental Study of Polyester/Fiberglass/Stainless Steel Fiber Metal Laminates Mechanical Properties

Basalt Fiber-Reinforced Epoxy Laminates: Improvement in Quasi-Static and Fatigue Properties with Modified Matrices and Fiber Surfaces Using Silica Nanoparticles

Flexural Performance Study of Basalt-Fiber-Reinforced Polymer Bar Basalt-Fiber-Reinforced Concrete Beams

Experimental Study of the Mechanical Properties and Microstructure of Basalt Fiber-Reinforced Concrete

Experimental study and mechanism analysis on basic mechanical properties of basalt fiber reinforced concrete

Mechanical properties and meso-microscopic mechanism of basalt fiber-reinforced recycled aggregate concrete

Mechanical Properties of Basalt / Chopped E-Glass Fiber and Graphite Powder Reinforced Hybrid Composites

Modeling and Simulation of Mechanical Performance in Textile Structural Concrete Composites Reinforced with Basalt Fibers

Study on Basalt Fiber Reinforced Concrete: Mechanical and Microstructural Properties and Analytical Modelling of Compressive Stress-Strain Curves

Experimental investigations on the fatigue behavior of hybrid basalt/glass fiber epoxy composites

Tensile and flexural properties of basalt fibers/nano-alumina powder-reinforced multi-scale composites

The Mechanical Properties of Fiber Metal Laminates Based on 3D Printed Composites

Study on Mechanical Properties of Basalt Fibers Superior to E-glass Fibers

The fracture properties of fiber metal laminates based on a 3D printed glass fiber composite

Mechanical Properties of Hybrid Graphene Nanoplatelet-Nanosilica Filled Unidirectional Basalt Fibre Composites

Effect of Nanoclay Addition on Mechanical and Microstructure Properties of E-Glass Fiber and AA2022 Metal Skin Reinforced Epoxy Laminates