Abstract:The reproduction of archaeological corrosion patinas is a key issue for the reliable validation of conservation materials before their use on cultural objects. In this study, bronze disks were intentionally buried for 15 years in the soil of the archaeological site of Tharros, both in laboratory and in situ, with the aim of reproducing corrosion patinas typical of archaeological artifacts to be used as representative surfaces for testing novel cleaning gels. The microstructural, microchemical and mineralogical features of the patinas were analyzed by a multianalytical approach, based on optical microscopy (OM), field emission scanning electron microscopy coupled with energy dispersive spectrometry (FE-SEM-EDS) and X-ray diffraction (XRD). The patinas developed in 15 years were compared with an archaeological bronze recovered from the same site after about two thousand years of burial (referred as short-term and long-term interaction, respectively). Results revealed a similar corrosion behavior, especially in terms of chemical composition and corrosion mechanisms. XRD detected the ubiquitous presence of cuprite, copper hydroxychlorides and terrigenous minerals, while OM and FE-SEM-EDS analyses of cross-sections evidenced similar patinas' stratigraphy, identifying decuprification as driving corrosion mechanism. However, some differences related to the type of local environment and to the time spent in soil were evidenced. In particular, patinas developed in situ are more heterogeneous and rougher, while the archaeological one is thicker and presents a major amount of cuprite, terrigenous deposits and uncommon corrosion compounds. Based on our findings, the disks buried in situ were selected and used as disposable substrates to study the cleaning effect of a novel polyvinyl alcohol (PVA)-based gel loaded with a chelating agent (Na2EDTA · 2H2O). Results show that the gel is effective in removing disfiguring degradation compounds and preserving the stable and protective patina. Based on the conservation needs, the time of application can be properly tuned. It is worth noticing that after a few minutes the green corrosion products can be selectively removed. The EDS analysis performed on the gels after cleaning reveals that they are highly selective for the removal of copper(II) compounds rather than Cu(I) oxide or Cu(0) from bronze substrates.

Polysaccharide-Based Supramolecular Hydrogel Coatings with Corrosion Barrier Zone for Protection of Patina Bronze

Hydrophilic ZnO Nanoparticle-Based Antimicrobial Coatings for Sandstone Heritage Conservation

The Preservation Damage of Hydrophobic Polymer Coating Materials in Conservation of Stone Relics

Reinforced protection of fragile bronze cultural relics based on nano-cuprammonium fiber material

pH-Responsive Semi-Interpenetrated Polymer Networks of pHEMA/PAA for the Capture of Copper Ions and Corrosion Removal

Study on the compounding of cysteine modified Schiff base and decanoic acid as corrosion inhibitors for bronze with patina

Innovative nano silicone wax coatings for the conservation of bronze artifacts from corrosion

A Sustainable Approach for Protection of Historical and Archeological Copper-Based Artifacts from Corrosion by Polymeric Coatings

Hybrid Materials Based on ZnO Nanoparticles and Organo-Modified Silica Coatings as Eco-Friendly Anticorrosive Protection for Metallic Historic Artifacts

The Electrochemical Impedance Study of Corrosion Protection of Bronze by Waterborne Organic Coating/Phosphonic Acid Protective System

Non-whitening superhydrophobic coating for heritage protection

Analysis of Corrosion Products on Bronze Wares of Shanxi Museum

Phosphonic Acids as Corrosion Inhibitors and Adhesion Promoters for Organic Coatings and Bronze

Comparative study of the efficiency of inhibitors and coatings for bronze artifacts

Reproducing bronze archaeological patinas through intentional burial: A comparison between short- and long-term interactions with soil

SYNERGISTIC EFFECT OF CORROSION INHIBITION ON BRONZE BY BENZOTRIAZOLE AND SODIUM MOLYBDATE

Microstructure and Chlorine Ion Corrosion Performance in Bronze Earring Relics

Fabrication of POSS-tethered Fluorinated Glycidyl Copolymers As Durable Hydrophobic and Adhesive Coatings

Corrosion self-diagnosing and self-repairing polymeric coatings based on zeolitic imidazolate framework decorated hydroxyapatite nanocontainer on steel

Enhancing Permanence of Corrosion Inhibitors Within Acrylic Protective Coatings for Outdoor Bronze Using Green Nanocontainers

Corrosion and Protection of Ancient Bronze Wares