Abstract:Solidification/stabilization (S/S) is a low-cost and efficient method for enhancing the mechanical properties of gold ore tailings powder (GTP) and decontaminating tailings. However, the traditional cement-based stabilization method is associated with environmental pollution and questionable sustainability. In this study, industrial waste residue was mixed with alkaline activators to prepare a sustainable waste-based composite geopolymer (WCG) to stabilize the GTP. Considering the cost of the novel geopolymer and the economic constraints of mining enterprises, a ratio of 5% geopolymer and 95% GTP was selected. The hydration mechanism, microstructure, mechanical properties, and leaching characteristics were analyzed after curing periods of 3, 7, 14, 28, and 90 days (d). The tests included phase structure analysis via x-ray diffraction analysis, thermogravimetric analysis and unconfined compression strength tests to evaluate the hydration products and strength of the stabilized GTP. The results showed that the increase in amorphous/unidentified content was not obvious after 28 d of curing and that the stabilized tailings with the same content of WCG had higher mechanical strength than those stabilized with ordinary Portland cement (32.5 MPa). Scanning electron microscope-energy dispersive spectroscopy and nitrogen adsorption tests were used to characterize the microstructure of the stabilized materials. These results indicate that the formation of C-(A)-S-H gels contributed to improvement in the degree of compaction of the stabilized samples. The immobilization mechanism of arsenic included precipitation, physical encapsulation, adsorption, and ion substitution. The stabilized materials had a dual-pore fabric characterized by interaggregate and intra-aggregate pores. The properties of the leaching solution, including the pH, electrical conductivity, oxidation-reduction potential, and heavy metal ion leaching concentrations, were determined to evaluate the leaching performance of the stabilized GTP. The relationship between the chemical properties of the leaching solution and the concentration of the leaching ions was analyzed to explain the immobilization mechanism of harmful elements. All harmful elements were well immobilized after 7 d of curing, and the leaching concentration remained constant over a longer curing time. This study provides a reference for the sustainable management of GTP and for improving the stabilization of tailings dams.

Solidification and stabilization of mercury-contaminated tailings in artisanal and small-scale gold mining using tras soil

Stabilization of residual mercury from gold mining as metacinnabar and cinnabar in ball mills on a pilot scale

Immobilization of mercury in tailings originating from the historical artisanal and small-scale gold mining using sodium polysulfide

Green remediation of high-lead contaminated soil by stabilization/solidification with insoluble humin: Long-term leaching and mechanical characteristics

Release characteristics and stabilization of heavy metals in antimony tailings in Yunnan Province, China

Hazard Study of Sludge from Mining Wastewater Treatment Systems (Tailings), Accumulation of Contaminants and Potential Utilization Proposals

Synthesis of ternary geopolymers using prediction for effective solidification of mercury in tailings

Optimization of Geopolymers for Sustainable Management of Mine Tailings: Impact on Mechanical, Microstructural, and Toxicological Properties

Solidification of arsenic and heavy metal containing tailings using cement and blast furnace slag

Solidification/stabilization of gold ore tailings powder using sustainable waste-based composite geopolymer

Assessment of Mercury Contamination in Water and Soil from Informal Artisanal Gold Mining: Implications for Environmental and Human Health in Darmali Area, Sudan

Isolation and Bioassay of N-fixing Bacteria from Mercury-Contaminated Tailing and Soil of Artisanal and Small-Scale Gold Mining

Self-cementation of the alkali-activated volcanic tuff coupling with thiol-functionalized expanded perlite that enhances the solidification and stabilization of the mercury-contaminated soil

A REVIEW OF SOLIDIFICATION/STABILIZATION OF HEAVY METAL CONTAMINATED SOIL

Field method for preservation of total mercury in waters, including those associated with artisanal scale gold mining

Use of Metallic Mercury in Artisanal Gold Mining by Amalgamation: A Review of Temporal and Spatial Trends and Environmental Pollution

Mercury abatement in the environment: Insights from industrial emissions and fates in the environment

Increasing the Sustainability of the Stabilization/Solidification of Potentially Toxic Elements Contained in Tailings from an Active Mine Using a Modified Lime Mortar

Remediation Technology for Heavy Metal-Contaminated Soil on Copper Post- Mining Land Reclamation

Solidification, remediation and long-term stability of heavy metal contaminated soil under the background of sustainable development

Synthesis of tailing slurry-based geopolymers for the highly efficient immobilization of heavy metals: Behavior and mechanism