Abstract:Multilayer flame-retardant coatings, consisting of opposite-charged polyelectrolyte polyethyleneimine (PEI), ammonium polyphosphate (APP) and polyacrylic acid (PAA), were constructed on the surface of soft and porous ramie fabrics by layer-by-layer (LBL) assembly technique. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and field-emission scanning electron microscopy with an energy-dispersive X-ray (SEM-EDX) analysis confirmed that PAA was successfully introduced into the bi-component PEI/APP multilayer flame-retardant coatings. The P/C (phosphorus/carbon) ratio was clearly increased on the surface of the ramie fabric with the increase of the number of layers. The effect of PAA as a supplementary acid source on the flame retardancy of the treated ramie fabrics was studied by thermogravimetic analysis (TGA), microscale combustion calorimetry (MCC) and vertical flame testing (VFT). The results of the thermal properties showed that the char residue of the coated fabrics at high temperature during thermogravimetric analysis was significantly enhanced as compared with the untreated sample. Furthermore, the microscale combustion calorimetry revealed a reduction for both peak heat release rate (PHRR) and total heat release (THR). The surface morphologies of all the untreated and treated ramie fabrics after VFT demonstrated that the PEI/APP/PAA coated specimen preserved the integrity of the original texture of the ramie fabrics, and a dense and continuous expansion carbon layer was formed on the surface of the ramie fabric. The carbon layer effectively prevented oxygen and heat from penetrating into the substrate, thereby giving the ramie fabric excellent self-extinguishing properties. EDX spectra also revealed that the ratio of P/O (phosphorus/oxygen) and P/C of the char of the treated ramie fabric became high after combustion test. Compared to the bi-component (PEI/APP)n sample, the introduction of the third component PAA seemed to work at low assembly cycles by increasing the charge density of PEI, thus to improve the add-on of the FR coating on the fabric, but the concentration of PAA had little influence on the assembly process. However, the same charges may repel each other from the confusion of APP and PAA with high layers, causing the FR effect not that favorable.

Optical and Mechanical Properties of Ramie Fiber/Epoxy Resin Transparent Composites

Superhydrophobic and conductive properties of carbon nanotubes/polybenzoxazine nanocomposites coated ramie fabric prepared by solution-immersion process

Flame Retardancy of Ramie Fabrics Treated by Layer-by-layer Assembly Technique of Tri-component PEI/PAA/APP

Preparation and properties of intumescent flame retardant multilayer coatings treated ramie fabric/benzoxazine resin laminates

Preparation and properties of flame retarded ramie/phenolic resin composites

Relationship Between Microstructure and Dielectric/thermal Management Properties of Biomass Ramie Fiber and Its Applications in Recyclable Wave-Transparent Composites

Flame retarding and reinforcing modification of ramie/polybenzoxazine composites by surface treatment of ramie fabric

Preparation and properties of ramie fabric-reinforced thermoset poly lactic acid composites

Hot Compaction and Mechanical Properties of Ramie Fabric/Epoxy Composite Fabricated Using Vacuum Assisted Resin Infusion Molding

Influence of Fabric Woven Styles on the Permeability and Mechanical Properties of Ramie Fiber Reinforced Composites

Study on the mechanical properties of ramie fiber/polypropylene composites prepared by hot pressing after the carding machine mixing

Characterization of Amino Silane Modified Ramie Fibre, OMMT Nanoclay-reinforced Epoxy Resin Composite

Modification of Ramie Fabric with a Metal‐ion‐doped Flame‐retardant Coating

Influence of Interface Modification on the Moisture Absorption and Thermal Resistance of Ramie Fiber/Degradable Epoxy Composites

Study on the performance of ramie fiber modified with ethylenediamine

Construction of Bio-Based Ramie Fabric/epoxy Resin Composites with High Flame Retardant and Mechanical Performances

Permeabilities along Fiber Direction of Ramie Bundles and Through-Thickness of Ramie Fabric Stack for Liquid Composite Molding

Influences of sodium hydroxide and oxalic acid treatments on physical, mechanical, thermal properties, and morphology of ramie fibers

Ramie natural fibre-reinforced biodegradable composites: mechanical, absorption and thermal behaviour study

Morphological, thermal and mechanical properties of ramie crystallites—reinforced plasticized starch biocomposites

Effect of Fiber Surface-Treatments on the Properties of Poly(lactic Acid)/ramie Composites