Abstract:Under triaxial deviatoric loading at stresses below failure, rocks generally exhibit nonlinearity and hysteresis in the stress‐strain curve. In 1965, Walsh first explained this behavior in terms of frictional sliding along the faces of closed microcracks. The hypothesis is that crack sliding is the dominant mode of rock inelasticity at moderate compressive stresses for certain rock types. Here we extend the model of David et al. (2012, https://doi.org/10.1016/j.ijrmms.2012.02.001) to include (i) the effect of the confining stress; (ii) multiple load‐unload cycles; (iii) calculation of the dissipated strain energy upon unload‐reload; (iv) either frictional or cohesive behavior; and (v) either aligned or randomly oriented cracks. Closed‐form expressions are obtained for the effective Young's modulus during loading, unloading, and reloading, as functions of the mineral's Young's modulus, the crack density, the crack friction coefficient and cohesion for the frictional and cohesive sliding models, respectively, and the crack orientation in the case of aligned cracks. The dissipated energy per cycle is quadratic and linear in stress for the frictional and cohesive models, respectively. Both models provide a good fit to a cyclic loading data set on polycrystalline antigorite, based on a compilation of literature and newly acquired data, at various pressures and temperatures. At high pressure, with increasing temperature, the model results reveal a decrease in friction coefficient and a transition from a frictionally to a cohesively controlled behavior. New measurements of fracture toughness and tensile strength provide quantitative support that inelastic behavior in antigorite is predominantly caused by shear crack sliding and propagation without dilatancy. We extend the crack sliding model of David et al. (2012, https://doi.org/10.1016/j.ijrmms.2012.02.001) to a triaxial state of stress We obtain closed‐form expressions for the stress‐dependent Young's modulus during cyclic loading The model is able to fit a cyclic loading data set on antigorite at various conditions of pressure and temperature

Evaluating Tensile Fractures in Rigid Clasts with Very High Aspect Ratio

Preliminary Study of Two-Scale Model for Analyzing Brittle Rock Based on Asymptotic Expansion Method

A Cohesive Model-Based Nonlinear Discontinuous Deformation Analysis for Tensile Fracture in Geotechnical Materials

Strength of Fractured Rocks

Strength and energy consumption of inherently anisotropic rocks at failure

Study of restricted fractures in veins and dykes, and associated stress distribution

Effect of Precrack Length and Inclination on Tensile Failure Behaviour of Heterogeneous Rocks

Effective elastic properties of rocks with transversely isotropic background permeated by a set of vertical fracture cluster

Universal behavior in fragmenting brittle, isotropic solids across material properties

A Microplane-Based Anisotropic Damage Model for Deformation and Fracturing of Brittle Rocks

Correlating toughness and roughness in ductile fracture

A Micro–macro Method for Evaluating Progressive and Direct Tensile Fractures in Brittle Rocks

MIXED MODE FRACTURE FOR LINEAR ELASTIC MATERIALS BASED ON STRAIN THEORY USED IN LOW PERMEABILITY RESERVOIRS

A constitutive model describing dilatancy and cracking in brittle rocks

Microstructural origins of crushing strength for inherently anisotropic brittle materials

Implications of Realistic Fracture Criteria on Crack Morphology

An Assumed Enhanced Strain Finite Element Framework for Tensile Fracturing Processes with Dual-Mechanism Failure in Transversely Isotropic Rocks

An analysis of nonuniform and localized deformation in ductile single crystals

Sliding Crack Model for Nonlinearity and Hysteresis in the Triaxial Stress‐Strain Curve of Rock, and Application to Antigorite Deformation

Dynamic Compressive Strength and Fragmentation in Felsic Crystalline Rocks