Abstract:Nanometric CeO2-supported cobalt oxide materials with variable Co/Ce atomic ratios were prepared by the method of ultrasonic-assisted incipient-wetness impregnation. The catalytic behaviors of a series of CoOx/nmCeO2 catalysts have been studied for soot combustion. XRD, XPS, Raman, UV–vis DRS and FT-IR spectroscopy characterization results indicated that CoO or cobalt–cerium solid solutions were formed in the samples with the low Co loading amount, while Co3O4 was formed in the samples with high Co loading amount. CoOx/nmCeO2 catalysts can further promote soot combustion in contrast to nanometric CeO2. This improvement is related to the increase in the redox properties of the catalysts brought about by loading cobalt oxide on nanometric CeO2. The TPR experiment results under hydrogen atmosphere indicated that the presence of Co decreases the reduction temperature of catalyst from 555°C (nanometric CeO2) to 286°C (Co20/nmCeO2). On the other hand, attributing to nanoparticle effect and NO2 formation, Com/nmCeO2 oxide catalysts prepared in this study have very high activity for soot combustion. The best catalytic activity was obtained over Co20/nmCeO2 catalyst that T10, T50, T90 were 286°C, 368°C, 418°C, respectively, and SCO2m was 98.8%. Compared with the blank case (i.e., without catalyst) for soot combustion, T50 decreased by more than 200°C and SCO2m increased by 40% point. And this catalytic activity for the combustion of soot particle is as good as supported Pt catalysts, which is the best catalyst system so far reported for soot combustion under loose contact conditions. This temperature of soot combustion can ensure immediate activation of the catalyst on the filter under the conditions of diesel engine emissions.

Potassium promoted Fe–Ce composite oxides monolithic catalysts for catalytic soot combustion

Diesel Soot Elimination over Potassium-Promoted Co3O4 Nanowires Monolithic Catalysts under Gravitation Contact Mode

Catalytic Diesel Soot Elimination over Potassium Promoted Transition Metal Oxide (co/mn/fe) Nanosheets Monolithic Catalysts

Preparation, Characterization and Catalytic Activity Studies of CeO2–K Diesel Soot Oxidation Catalysts Loaded on Porous Al2O3 Substrate Using Water-Immiscible Solvent

The effects of potassium halides on catalytic activities of CeO2–K based catalysts for diesel soot oxidation

Highly Efficient Catalytic Soot Combustion over Potassium-Promoted Pine Needles-Like CoMnO Nanoarray Monolithic Catalysts

Enhanced Soot Combustion Through Acid-Assisted Decoration of K on 3DOM LaFeO3 Perovskite

The Highly Active Catalysts of Nanocomposite K-Co-Ceo2 for Soot Combustion

The Highly Active Catalysts of Nanometric CeO2-supported Cobalt Oxides for Soot Combustion

Soot Combustion Performance and H2-TPR Study on Ceria-Based Mixed Oxides

Catalytic combustion of soot over Ce and Co substituted three-dimensionally ordered macroporous La1−xCexFe1−yCoyO3 perovskite catalysts

Effect of Potassium on Sol-Gel Cerium and Lanthanum Oxide Catalysis for Soot Combustion

KNO3 supported on three-dimensionally ordered macroporous La0.8Ce0.2Mn1−xFexO3 for soot removal

Highly efficient catalytic soot combustion performance of hierarchically meso-macroporous Co3O4/CeO2 nanosheet monolithic catalysts

The role of potassium in K/Co3O4 for soot combustion under loose contact

K+ doping Ce-Sm oxide catalysts on cordierite honeycomb ceramic substrate for soot catalytic combustion

The Influence of Partial Substitution of Ce with K in CeMO3 (M = Mn, Fe, Co, Ni, Cu) Perovskite Catalysts on Soot Combustion Performance

Performance of K-promoted Hydrotalcite-Derived CoMgAlO Catalysts Used for Soot Combustion, NOx Storage and Simultaneous Soot–nox Removal

Surface Adsorbed and Lattice Oxygen Activated by the CeO 2 /Co 3 O 4 Interface for Enhancive Catalytic Soot Combustion: Experimental and Theoretical Investigations

Nox-Assisted Soot Oxidation over K/Cuce Catalyst

Facile synthesis of catalytically active CeO2 for soot combustion