Abstract:Nanometric CeO2-supported cobalt oxide materials with variable Co/Ce atomic ratios were prepared by the method of ultrasonic-assisted incipient-wetness impregnation. The catalytic behaviors of a series of CoOx/nmCeO2 catalysts have been studied for soot combustion. XRD, XPS, Raman, UV–vis DRS and FT-IR spectroscopy characterization results indicated that CoO or cobalt–cerium solid solutions were formed in the samples with the low Co loading amount, while Co3O4 was formed in the samples with high Co loading amount. CoOx/nmCeO2 catalysts can further promote soot combustion in contrast to nanometric CeO2. This improvement is related to the increase in the redox properties of the catalysts brought about by loading cobalt oxide on nanometric CeO2. The TPR experiment results under hydrogen atmosphere indicated that the presence of Co decreases the reduction temperature of catalyst from 555°C (nanometric CeO2) to 286°C (Co20/nmCeO2). On the other hand, attributing to nanoparticle effect and NO2 formation, Com/nmCeO2 oxide catalysts prepared in this study have very high activity for soot combustion. The best catalytic activity was obtained over Co20/nmCeO2 catalyst that T10, T50, T90 were 286°C, 368°C, 418°C, respectively, and SCO2m was 98.8%. Compared with the blank case (i.e., without catalyst) for soot combustion, T50 decreased by more than 200°C and SCO2m increased by 40% point. And this catalytic activity for the combustion of soot particle is as good as supported Pt catalysts, which is the best catalyst system so far reported for soot combustion under loose contact conditions. This temperature of soot combustion can ensure immediate activation of the catalyst on the filter under the conditions of diesel engine emissions.

Nox-Assisted Soot Oxidation over K/Cuce Catalyst

Modification of CeO2-ZrO2 Catalyst by Potassium for NOx-assisted Soot Oxidation.

Promotional effect of potassium on soot oxidation activity and SO2-poisoning resistance of Cu/CeO2 catalyst

Preparation, Characterization and Catalytic Activity Studies of CeO2–K Diesel Soot Oxidation Catalysts Loaded on Porous Al2O3 Substrate Using Water-Immiscible Solvent

Soot Combustion Performance and H2-TPR Study on Ceria-Based Mixed Oxides

The Catalytic Activity of CuO–CeO2 Mixed Oxides for Diesel Soot Oxidation with a NO/O2 Mixture

The CO2 absorption characteristics and catalytic oxidation activities of V/K and V/Ce/K-based catalysts for diesel soot oxidation

Potassium promoted Fe–Ce composite oxides monolithic catalysts for catalytic soot combustion

Selective Oxidation of Soot over Cu Doped Ceria/ceria–zirconia Catalysts

The effects of potassium halides on catalytic activities of CeO2–K based catalysts for diesel soot oxidation

Preparation Methods and Thermal Stability of Ba-Mn-Ce Oxide Catalyst for Nox-Assisted Soot Oxidation

Cu-Mn-Ce Mixed Oxides Catalysts for Soot Oxidation and Their Mechanistic Chemistry

Effects of Adsorbed and Gaseous NOx Species on Catalytic Oxidation of Diesel Soot with MnOx–CeO2 Mixed Oxides

Role of CeO2–ZrO2 in Diesel Soot Oxidation and Thermal Stability of Potassium Catalyst

The Highly Active Catalysts of Nanometric CeO2-supported Cobalt Oxides for Soot Combustion

Controllable Synthesis of Argentum Decorated CuOx@CeO2 Catalyst and Its Highly Efficient Performance for Soot Oxidation

Simultaneous removal of soot and NO over thermal stable Cu–Ce–Al mixed oxides

Enhanced Soot Oxidation Activity of a CuO-Doped CeO2 Catalyst via Acid Etching

Diesel soot oxidation over potassium-promoted urchin-structured NiO-NiCo2O4 catalyst

Effects of CuO/CeO2 and CuO/γ-Al2O3 catalysts on NO + CO reaction

Copper catalysts for soot oxidation: alumina versus perovskite supports