Abstract:The Fukushima accident shows that In-Vessel Retention (IVR) of molten core debris has not been appropriately assessed, and a certain pressure (upto 8.0 MPa) still exists inside the reactor pressure vessel (RPV). Generally, the pressure was supposed to be successfully released, and the externally cooled lower head wall mainly experienced the temperature difference which may be more than 1000 degrees C. Therefore, in order to make the IVR succeed, it is necessary to investigate the creep behavior and damage distribution of the RPV under complex thermal-mechanical loadings. Accordingly, considering the unlikely core meltdown scenario as a severe accident condition, the failure site and time have to be predicted for a safety assessment purpose. Due to heavy thick wall of the RPV, the high temperature gradient inevitably results in various failure modes, i.e., plastic failure and creep failure. In disclosing it, the finite element model (FEM) has been developed for simulating the failure processes and the visco-plastic behavior of vessel wall. In accounting for the most dangerous situation, the critical heat flux (CHF) loading is applied on the RPV as a limit boundary. Subsequently, some failure modes has been found as local melting, plastic damage and creep damage by FEM. Furthermore, it is found that the RPV failure varies with the internal pressures. For the situation of low pressure and high temperature, the failure dominated by creep takes place at the hot focus site. With the further increase of pressure, the thinnest wall thickness is weakest for maintaining the RPV integrity, the damage of which initiates at the outside of RPV by plasticity. Besides, the multiaxial state of stress is found to accelerate the damage evolution on the thinnest site, and the uniaxial failure criterion underestimate the damage accumulation. (C) 2016 Elsevier Ltd. All rights reserved.

Geometry effects on the pressure-temperature limit curve of small modular reactor vessel

Comparative Study on Reactor Pressure Vessel Failure Behaviors with Various Geometric Discontinuities under Severe Accident

Investigation on Structural Behaviors of Reactor Pressure Vessel with the Effects of Critical Heat Flux and Internal Pressure

Development of Pressure-Temperature Limit Curves Considering Unified Constraint for Reactor Pressure Vessel

Micromechanics-based Burst Failure Analysis of Composite Vessel Used for Hydrogen Storage

Failure simulation of nuclear pressure vessel under LBLOCA scenarios

Constraint characterization and fracture initiation analysis for semi-elliptical surface cracks in reactor pressure vessel

Study on Structural Integrity of Reactor Pressure Vessel with Various Ablation under Core Meltdown Accident

Study on Structural Failure of RPV with Geometric Discontinuity under Severe Accident

Creep and Damage Analysis of Reactor Pressure Vessel Considering Core Meltdown Scenario

Fracture Studies on Cruciform Bend Specimens of Pressure Vessel Steel subjected to Thermo-mechanical Loading

Modal and Structural Analysis on a Main Feed Water Regulating Valve under Different Loading Conditions

Creep Deformation and Damage Behavior of Reactor Pressure Vessel under Core Meltdown Scenario

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Thermo-Mechanical Analysis of Instrumentation Guide Tube Failure During a Severe Accident in a Nordic Boiling Water Reactor

Creep Buckling Analysis of PMMA (polymethyl Methacrylate) Pressure Vessels for Application in Neutrino Detectors

Integrity Assessment Considering Unified Constraint for Reactor Pressure Vessel under Pressurized Thermal Shock

Large Thermal Gradients on Structural Integrity of a Reactor Pressure Vessel Subjected to Pressurized Thermal Shocks

Re-Evaluation of the Structural Integrity of the Chinese Qinshan 300-MWe Reactor Pressure Vessel Under Pressurized Thermal Shock Using the Master Curve Method

Multi-Scale Failure Analysis Model for Cryogenic Pressure Vessel Under Combined Thermal Stress and Mechanical Stress

Application of Flaw Updating Process on Probabilistic Integrity Analysis for a Reactor Pressure Vessel Subjected to Pressurized Thermal Shocks