Abstract:The Fukushima accident shows that In-Vessel Retention (IVR) of molten core debris has not been appropriately assessed, and a certain pressure (upto 8.0 MPa) still exists inside the reactor pressure vessel (RPV). Generally, the pressure was supposed to be successfully released, and the externally cooled lower head wall mainly experienced the temperature difference which may be more than 1000 degrees C. Therefore, in order to make the IVR succeed, it is necessary to investigate the creep behavior and damage distribution of the RPV under complex thermal-mechanical loadings. Accordingly, considering the unlikely core meltdown scenario as a severe accident condition, the failure site and time have to be predicted for a safety assessment purpose. Due to heavy thick wall of the RPV, the high temperature gradient inevitably results in various failure modes, i.e., plastic failure and creep failure. In disclosing it, the finite element model (FEM) has been developed for simulating the failure processes and the visco-plastic behavior of vessel wall. In accounting for the most dangerous situation, the critical heat flux (CHF) loading is applied on the RPV as a limit boundary. Subsequently, some failure modes has been found as local melting, plastic damage and creep damage by FEM. Furthermore, it is found that the RPV failure varies with the internal pressures. For the situation of low pressure and high temperature, the failure dominated by creep takes place at the hot focus site. With the further increase of pressure, the thinnest wall thickness is weakest for maintaining the RPV integrity, the damage of which initiates at the outside of RPV by plasticity. Besides, the multiaxial state of stress is found to accelerate the damage evolution on the thinnest site, and the uniaxial failure criterion underestimate the damage accumulation. (C) 2016 Elsevier Ltd. All rights reserved.

Creep Buckling Analysis of PMMA (polymethyl Methacrylate) Pressure Vessels for Application in Neutrino Detectors

Creep Behavior and Lifetime Prediction of PMMA Immersed in Liquid Scintillator

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Experimental and Numerical Buckling Failure Analysis of Acrylic Hemispheres for Application in Neutrino Detector

Micromechanics-based Burst Failure Analysis of Composite Vessel Used for Hydrogen Storage

Numerical Limit Load Analysis of 3D Pressure Vessel with Volume Defect Considering Creep Damage Behavior

Fatigue crack growth properties of PMMA material used in underwater transparent structures

Lifetime assessment of deep-sea manned cabin with PMMA pressure-resistant hull prior to micro-cracks

Creep and Damage Analysis of Reactor Pressure Vessel Considering Core Meltdown Scenario

Shear-compression failure behavior of PMMA at different loading rates

Study on the Fracture Properties of the PMMA Structure for the JUNO Central Detector

Creep Rupture Assessment of Cyclically Heated 3D Pressure Pipelines with Volumetric Defects Using a Direct Numerical Approach

Plastic Limit Analysis Of Modified 9cr-1mo Steel Pressure Vessel Containing Volume Defect With Creep Damage Law

Creep Deformation and Damage Behavior of Reactor Pressure Vessel under Core Meltdown Scenario

Analytical and Numerical Modelling of Creep Deformation of Viscoelastic Thick-Walled Cylinder with Fractional Maxwell Model

Characterization of Multiaxial Creep Behaviors of 16MND5 Steel at Pre- and Post-phase Transformation

Determination of Multiaxial Stress Rupture Criteria for Creeping Materials: A Critical Analysis of Different Approaches

Influence of Bore Pressure on the Creep Behaviour of Polymer Barrier Layer Inside an Unbonded Flexible Pipe

Overall Evaluation Light-Weight Composite Pressure Vessel With Alloy Liner By Acoustic Emission And Bragg Grating

Study on Creep Mechanical Properties of Non-Water Reacting Polyurethane Grouting Material

Plastic Failure Analysis of Defective Pipes with Creep Damage under Multi-Loading Systems