Abstract:Currently, due to the requirement of lightweight in the transportation field, the demand for high-strength aluminum alloy is increasing, but it is difficult for the traditional forming processes to balance the three com-ponents of formability, strength and efficiency. In order to solve this problem, a novel stamping process for high-strength AA7075 aluminum alloy sheets is proposed, termed Pre-hardened Cryogenic Forming (PCF) process. PCF process is based on the W-temper alloy and to fulfill simultaneously the demands of good cryogenic formability and high post-formed strength through a suitable ratio of microstructure between the solution-treated matrix and the pre-aged second phases, thereby cancelling the additional artificial aging treatment and achieving high-efficiency. The good cryogenic formability is assured by solution-treated matrix, while the initial strength and further artificial age-hardening during paint baking are regulated by means of pre-aged second phases. A critical issue for PCF process is to determine the pre-aging process window, i.e., a suitable combination of pre-aging temperature and time period, because there is a contradiction between the cryogenic formability and post-formed strength under the constraint of high efficiency. The results of tensile tests show that AA7075 aluminum alloy after pre-aging at 120 degrees C for 1 h (PA-120-1h) can achieve excellent comprehensive mechanical properties of cryogenic plasticity and post-baking strength. Combined with the analysis of micro-experimental results, the optimal pre-aging process window of AA7075 aluminum alloy is to ensure that the volume fraction of fine precipitates is between 2.5 % and 4 %, and the recommended ratio of the fine precipitates (<2 nm/>= 2 nm) is about 1.5. The mixed structure of the GP zones and the eta ' phases for PA-120-1h alloy is the suitable combination of strengthening precipitates for balancing cryogenic plasticity and post-baking strength. Based on the newly-designed cooling system, stamping tests are conducted on a W-shaped beam component to verify the engineering feasibility. Based on PA-120-1h alloy sheets, the component with improved surface quality can be successfully formed by PCF process. The final post-baking strength exceeds 92 % of the tensile strength of AA7075-T6 alloy without extra heat treatment, and the thickness reduction rate is within 10 %. Regardless of the immersion time of the sheets in liquid nitrogen, the PCF process can be finished within 2 min, greatly improving the forming efficiency.

Manufacture of the hetero-structure bonding joint between carbon fibre-reinforced plastics and aluminium alloy by using hot pressing one-time forming process

Hot-pressing treatment to improve the shear strength of refill friction stir spot-welded 1060 Al–carbon fiber–reinforced plastic joint

Feasibility study of an integrated pre‐curing and forming process for 6061 Al alloy and carbon fiber hybrid composites

Optimization of Friction Lap Joining Parameters and Exploration Connection Mechanism of CFRPA6/6061-T6 Aluminum Alloy Hybrid Structures

Experimental and numerical study of thermoforming of Al/CFRP hybrid composites

Evaluation of Joint Strength for CFRPs and Aluminum Alloys by Friction Stir Spot Welding Using Multi-Stage Heating

Flat Friction Spot Joining of Aluminum Alloy to Carbon Fiber Reinforced Polymer Sheets: Experiment and Simulation

Improving the interfacial bonding strength and suppressing shrinkage porosity of 6061Al/GFRTP hot-pressing joints via interfacial modification

Achievement of High-strength Al/CFRP Hybrid Joint Via High-speed Friction Stir Lap Joining and Laser Texturing Pretreatment Parameters Variation

Improvement of Mechanical Properties and Forming Efficiency during Hot Gas Forming of CFRP Curved Surface Components

Research Progress in Joining of Carbon Fiber-Reinforced Polymer Composites and Aluminum/magnesium Alloys

Achieving a Strong Friction‐Lap Joint of Continuous Carbon‐Fiber‐Reinforced Plastic/Aluminum Alloy via a Surface Laser‐Processing Pretreatment

Experimental study on properties and structure of magnesium alloy/PC/ABS hybrid materials prepared by hot-press molding technology

An efficient pre-hardened cryogenic forming process for AA7075 aluminum alloy sheets

Design and Performance Study of Carbon Fiber-Reinforced Polymer Connection Structures with Surface Treatment on Aluminum Alloy (6061)

Experimental and Theoretical Investigation of Laser Pretreatment on Strengthening the Heterojunction Between Carbon Fiber Reinforced Plastic and Aluminum Alloy.

Welding and Riveting Hybrid Bonding of 6061 Al and Carbon Fiber Reinforced Composites

Direct printing of carbon fiber reinforced thermoplastic plastic on metal sheets via fused deposition modeling assisted by laser texturing

Characterization and Formability of Titanium/Aluminum Laminate Composites Fabricated by Hot Pressing

Interface structure and bonding strength of metallurgical bonded aluminum foam sandwich (AFS) fabricated by hot-pressing

Effect of interfacial nanostructure on mode mixity in directly bonded carbon fiber reinforced thermoplastic laminates and aluminum alloy considering thermal residual stress