Abstract:<p>Stable solid electrolyte interphase (SEI) has been well established to be critical for the reversible operation of Li (ion) batteries, yet our understanding of its mechanical properties currently remains incomplete. Here, we used an electrochemical quartz crystal microbalance combined with dissipation monitoring (EQCM-D) to investigate SEI formation. By quantitatively estimating in-situ, the change in mass, shear modulus, and viscosity of the SEI, we show that the SEI formation in propylene carbonate (PC)- and ethylene carbonate/diethyl carbonate (EC/DEC)-based electrolytes involves the growth of a rigid layer followed by a viscoelastic layer, whereas a distinct "one-layer" rigid model is applicable to the SEI formulated in tetraethylene glycol dimethyl ether (TEGDME)-based electrolyte. With the continuous formation of the SEI, its shear modulus decreases accompanied by an increase in viscosity. In TEGDME, the lightest/thinnest SEI (mass lower than in PC by a factor of nine) yet having the greatest stiffness (more than five times that in PC) is obtained. We attribute this behavior to differences in the chemical composition of the SEIs, which have been revealed by tracking the mass-change-per-mole-of-electron-transferred using EQCM-D and further confirmed by X-ray photoelectron spectroscopy.</p>

What problem does this paper attempt to address?

The paper attempts to address the issue of insufficient understanding of the mechanical properties of the solid electrolyte interphase (SEI) in lithium (ion) batteries. Specifically, although SEI is crucial for the reversible operation of lithium (ion) batteries, the current understanding of its mechanical properties is incomplete. The authors quantitatively studied the formation process of SEI in different electrolyte systems, including changes in its mass, shear modulus, and viscosity, using electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D) technology. The study aims to reveal the impact of different solvents on the mechanical properties of SEI, thereby providing a theoretical basis for designing more stable and efficient SEI. ### Main Research Content: 1. **Research Background**: - SEI is a passivation layer formed on the surface of the lithium (ion) battery anode, composed of decomposition products of the electrolyte at low reduction potentials. - An ideal SEI should have high mechanical strength, good electrical insulation, and good ionic conductivity to inhibit further electrolyte decomposition and anode capacity loss. - For lithium metal anodes, a stable SEI is particularly important because lithium metal has a very low reduction potential and easily reacts with the electrolyte, leading to capacity decay and dendrite growth. 2. **Research Methods**: - Real-time monitoring of the SEI formation process using electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D) technology. - Quantitative analysis of SEI mass, shear modulus, and viscosity by measuring frequency changes (Δf) and dissipation changes (ΔD). - Comparison of the SEI formation process in three different electrolyte systems (propylene carbonate (PC), ethylene carbonate/diethyl carbonate (EC/DEC), and tetraethylene glycol dimethyl ether (TEGDME)). 3. **Main Findings**: - In PC and EC/DEC-based electrolytes, the SEI formation process involves the initial deposition of a rigid layer followed by the growth of a viscoelastic layer. - In TEGDME-based electrolytes, the SEI formation process only involves the formation of a rigid layer. - The SEI formed in TEGDME-based electrolytes has the lightest mass (only 1/9 of that in PC-based electrolytes) but the highest rigidity (more than 5 times that of PC-based electrolytes). - Different solvents significantly affect the chemical composition of SEI, which explains the differences in SEI mechanical properties. ### Conclusion: Using EQCM-D technology, the authors successfully quantitatively analyzed the changes in the mechanical properties of SEI in different electrolyte systems, revealing the impact of solvents on the structure and composition of SEI. These findings provide important theoretical basis for designing more stable and efficient SEI, which helps to improve the cycling stability and safety of lithium (ion) batteries.

Monitoring the mechanical properties of the solid electrolyte interphase (SEI) using electrochemical quartz crystal microbalance with dissipation

Effect of electrolytes on the structure and evolution of the solid electrolyte interphase (SEI) in Li-ion batteries: A molecular dynamics study

Diffusion-Induced Transient Stresses in Li-Battery Electrodes Imaged by Electrochemical Quartz Crystal Microbalance with Dissipation Monitoring and Environmental Scanning Electron Microscopy

Perception of insight in the formation of solid electrolyte interphase

In Situ Monitoring of Gravimetric and Viscoelastic Changes in 2D Intercalation Electrodes

Influence of Water Contamination on the SEI Formation in Li-Ion Cells: An Operando EQCM-D Study

Influence of Carbonate Solvents on Solid Electrolyte Interphase Composition over Si Electrodes Monitored by In Situ and Ex Situ Spectroscopies

Study of the formation and evolution of solid electrolyte interface via in-situ electrochemical impedance spectroscopy

Mechanical insights into the stability of heterogeneous solid electrolyte interphase on an electrode particle

Direct in-situ measurement of electrical properties of solid electrolyte interphase on lithium metal anode

Probing Mechanical Properties of Solid-Electrolyte Interphases on Li Nuclei by In Situ AFM

Operando Observations of SEI Film Evolution by Mass‐Sensitive Scanning Transmission Electron Microscopy

Thermal stability of solid electrolyte interphase of lithium-ion batteries

Direct in situ measurements of electrical properties of solid–electrolyte interphase on lithium metal anodes

Electrolyte-dependent formation of solid electrolyte interphase and ion intercalation revealed by in situ surface characterizations

Unveiling the Role of Li+ Solvation Structures with Commercial Carbonates in the Formation of Solid Electrolyte Interphase for Lithium Metal Batteries

Molecular Insights into the Structure and Property Variation of the Pressure-Induced Solid Electrolyte Interphase on a Lithium Metal Anode.

In Situ Measurements of the Mechanical Properties of Electrochemically Deposited Li2CO3 and Li2O Nanorods.

Operando Electrochemical Liquid Cell Scanning Transmission Electron Microscopy Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries

Probing the Mechanically Stable Solid Electrolyte Interphase and the Implications in Design Strategies