Abstract:We need batteries to get the best out of renewable energies and other low-carbon energy sources, and the most promising path forward is to invest in high-energy-density battery technologies. In this regard, lithium metal is the best candidate for the anode electrode as it is the lightest metal on earth and has the lowest electrochemical potential (-3.04 V vs. SHE). However, the challenge to overcome for mass commercializing lithium-metal batteries (LMB) is stabilizing the solid electrolyte interphase that naturally grows at the electrode-electrolyte interface to avoid uncontrolled reactions leading to lithium depletion. Since the successful introduction of lithium-ion batteries (LIB), it has been known that tuning of the SEI composition and morphology is fundamental to prolong the battery life span; a well-engineered SEI layer simultaneously serves as an electron barrier and favors Li+ ion conduction across it, ensuring proper battery performance. However, the engineering of the SEI layer in LMB is more complex than its counterpart LIB batteries, given that lithium metal is overwhelmingly more reactive than graphite and the overall Li+ ion current across it is orders of magnitude higher. The up-to-date knowledge on the SEI morphology indicates that inorganic phases produced upon the decomposition of lithium salts present in the electrolyte tends to grow dominantly buried within the SEI layer, acting as an intermediate between the surviving lithium metal and the outermost organic SEI phase grown after decomposition of solvent molecules. The effect of electrolyte additives and diluents is to tweak the SEI composition. The narrative built after years of experimentation tells that proper battery functioning depends heavily on the ability of the incoming Li+ ions to desolve near the SEI outermost layer without triggering further side reactions, penetrate the inner SEI, and deposit in the anode as reduced lithium. However, the intricacies of the elementary reactions and the stage where the reduction takes place still fall beyond detailed comprehension, even though the development of in situ and operando analytical techniques has brought us a level of understanding on the subject that was unimaginable a few decades ago. In this talk, we discuss the instrumental impact that multiscale modeling techniques have played in clarifying the elementary steps of the SEI formation on pristine lithium metal, providing a comprehensive understanding of the precursors formed in the early stages of Solid-Electrolyte Interphase (SEI) growth. For instance, density functional theory (DFT) calculations have revealed that electrolyte diluents, such as TTE, previously considered inert to lithium metal, actively modify the liquid electrolyte solvation structure by weakly interacting with Li+ ions. Additionally, these diluents decompose against lithium metal, releasing fluoride ions and inundating the SEI layer with LiF. Similarly, DFT-based molecular dynamics (MD) techniques, including ab initio (AIMD) and reactive classical molecular dynamics methods (ReaxFF MD, among others), have facilitated a picoseconds (ps) scale observation of the temporal evolution of these SEI precursors, propelling a mechanistic understanding of the dynamics of the SEI formation; it is now recognized that there is an initial and rapid electrolyte decomposition occurring within the first tens of picoseconds after contact with lithium metal, preceding a longer-scale mass transfer segregation process leading to the formation of a myriad of organic and inorganic microphases within the SEI structure. However, the accessible time and space windows to MD methods fall within few hundred ps, leaving out the study of the morphological aspects of the SEI over extended cycling. In this sense, we discuss through kinetic Monte Carlo (kMC) calculations the evolution of the SEI formation on lithium metal and confirm the critical role that dislocations and grain boundaries play in ensuring proper lithium plating and mobility within the SEI layer over cycling. We confirm that bulk lithium diffusion within the inorganic SEI microphases, such as LiF and Li 2 O, is significantly lower than lithium mobility across LiF/Li 2 O interfaces. We also discuss the impact of electrolyte tunning on SEI morphology and provide insights into developing an SEI formation strategy based on the electrolyte molecules electrochemical stability and their relative contents of heteroatom species, such as F and O, to seed in the SEI composition and morphology, which we believe could have a significant impact on the development of stable LMB batteries.

Perception of insight in the formation of solid electrolyte interphase

Atomistic Insights into the Thermal Transport Properties of Inorganic Components of Solid Electrolyte Interphase (SEI) in Lithium-Ion Batteries

Ab Initio Insights into the Solid Electrolyte Interphase Formation in Lithium Metal Batteries with Carbonate Electrolytes

Effect of electrolytes on the structure and evolution of the solid electrolyte interphase (SEI) in Li-ion batteries: A molecular dynamics study

Insight on lithium metal anode interphasial chemistry: Reduction mechanism of cyclic ether solvent and SEI film formation

Influence of Carbonate Solvents on Solid Electrolyte Interphase Composition over Si Electrodes Monitored by In Situ and Ex Situ Spectroscopies

Chemistry and Formation of Solid-Electrolyte Interphase (SEI) at Li-Metal Potential

Unraveling the Dynamics of Solid-Electrolyte Interphase (SEI) Formation on Lithium Metal: Insights from Multiscale Modeling

Stability of Solid Electrolyte Interphase Components on Lithium Metal and Reactive Anode Material Surfaces

Electrolyte-dependent formation of solid electrolyte interphase and ion intercalation revealed by in situ surface characterizations

First-Principles Insights on the Formation Mechanism of Innermost Layers of Solid Electrolyte Interphases on Carbon Anodes for Lithium-Ion Batteries

Understanding Solid Electrolyte Interphase (SEI) Species at the Electrode-Electrolyte Interface in Liquid Lithium Metal Batteries Via in-Situ Fourier Transform Infrared (FTIR) Spectroscopy

How Solid-Electrolyte Interphase Forms in Aqueous Electrolytes

In situ quantification of interphasial chemistry in Li-ion battery

Thermal stability of solid electrolyte interphase of lithium-ion batteries

(Invited) Modeling the Charge Transfer Reactions at Li/SEI/Electrolyte Interfaces in Lithium-Ion Batteries

Effects of Electrolyte Solvent Composition on Solid Electrolyte Interphase Properties in Lithium Metal Batteries: Focusing on Ethylene Carbonate to Ethyl Methyl Carbonate Ratios

Study of the formation and evolution of solid electrolyte interface via in-situ electrochemical impedance spectroscopy

[Combined intravenous aminophenazone treatment in medical practice].

Structural Insights into Solid Electrolyte Interphase (SEI) on Lithium Metal Anode: from Design Strategies to the Stability Evaluation

Direct observation of inhomogeneous solid electrolyte interphase on MnO anode with atomic force microscopy and spectroscopy.