Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

Assessment of Nucleation Boiling Models and Improvement by the Chen Correlation for Two-fluid Model CFD

CFD Simulations and Experimental Verification on Nucleate Pool Boiling of Liquid Nitrogen

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Assessment of Nucleate Boiling Correlations Applied to Thermal-hydraulic Code of Reactor

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

Parameter Sensitivity Analysis and Model Verification of Two-phase CFD Simulation in Nucleate Boiling

Numerical Simulation of Subcooled Boiling Water in Vertical Concentric Annulus under Low Pressure

Modeling of Low-Pressure Subcooled Boiling Flow of Water Via the Homogeneous MUSIG Approach

Modeling and numerical investigation of hydrogen nucleate flow boiling heat transfer

Population Balance Modelling for Subcooled Boiling Flow of Liquid Nitrogen in A Vertical Tube

Evaluation of several liquid–vapor phase change models for numerical simulation of subcooled flow boiling

Development of a new semi-mechanistic wall boiling heat transfer model for CFD methodology focusing on macroscopic parameters

A Unifying Bubble-Layer-Based Theoretical Model for Flow Boiling and Application to a Rod Bundle

Effects of Interaction Models on Upward Subcooled Boiling Flow in Annulus

Numerical Simulation of Subcooled Boiling Water at Low Pressure Incorporating Homogeneous MUSIG Model

Investigation of the impact of near-wall mesh size on the transition from microscopic wall boiling mechanism to macroscopic multiphase-CFD models

ASSESSMENT AND ANALYSIS OF VARIOUS MECHANISMS IN THE COALESCENCE AND BREAKUP MODELS FOR UPWARD BUBBLY FLOW

A Unified Relationship Between Bubble Departure Frequency and Diameter During Saturated Nucleate Pool Boiling

Numerical Simulation of Subchannel Flow Boiling Using Five-Component Wall Boiling Model and Imusig Model

Numerical Simulation of Flow Boiling for Organic Fluid with High Saturation Temperature in Vertical Porous Coated Tube

Numerical Investigation of Flow Boiling Characteristics in Narrow Rectangular Channels Using Two-Fluid Eulerian Cfd Model Covering a Wide Range of Pressures