Abstract:High-nickel layered ternary cathode coupling with Si-based anode is one of the most promising strategies to realize high-energy-density batteries for power electric vehicles. However, undesired interfacial instability on both sides of cathode and anode causes continuous parasitic reactions and phase transformations, and results in fast degradation of the batteries. To address this issue, herein, in-situ reliable, compact and ionically conductive interface films are constructed effectively on both LiNi0.6Co0.2Mn0.2O2 (NMC622) cathode and SiO-C anode simultaneously by simply using a multifunctional additive, lithium difluorobis(oxalato) phosphate (LiDFBOP), due to its preferential redox reactivity then efficiently influencing the subsequent electrochemical behaviors of bulk electrolyte. These films shield the electrodes against the electrolyte attack, thus enabling long-term cycling stability and enhancing Coulombic efficiency of NMC622/SiO-C pouch cells. In addition, the highly Li-ionically conductive interphases also promote the electrode kinetics, which ensure the excellent rate capability as well as low temperature performance. The underlying interface formation mechanisms in term of specific consumption amount of additive on each electrode simultaneously are quantitatively studied by combining several complementary advanced characterizations techniques such as IC, TOF-SIMS, XPS and HRTEM etc., which not only benefit to predict the optimal addition content for cost-effective electrolyte in the actual conditions, but also validate that abundant Li-containing fluorinated inorganics and organic species regulate the microstructure and the composition of interface films, leading to enhanced ionic conductivity and intensified structure integrity, then finally contributing to the improved electrochemical performance of full pouch cells. New and in-depth insight in additive-involved interface reactions provides new opportunities for the design of rational surface films to realize high-energy batteries.

Interface‐Targeting Individually Functionalized Ionic Additive to Construct Stable Interphase on Selective Electrode Surface for Practical Lithium‐Ion Pouch Cells

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

A bicomponent electrolyte additive towards stabilized interface for high-performance lithium-ion batteries

A Multifunctional Additive Capable of Electrolyte Stabilization and Structure/Interphases Regulation of High‐Energy Li‐Ion Batteries

Functionality Selection Principle for High Voltage Lithium-ion Battery Electrolyte Additives

Nonsacrificial Additive for Tuning the Cathode-Electrolyte Interphase of Lithium-Ion Batteries.

Mechanistic Study of Electrolyte Additives to Stabilize High-Voltage Cathode-Electrolyte Interface in Lithium-Ion Batteries.

Modulation and quantitative study of conformal electrode-electrolyte interfacial chemistry toward high-energy-density LiNi0.6Co0.2Mn0.2O2‖SiO-C pouch cells

Constructing an Inorganic-Rich Solid Electrolyte Interphase by Adjusting Electrolyte Additives for Stable Li Metal Anodes

Asymmetrical Functionalization of Polarizable Interface Restructuring Molecules for Rapid and Longer Operative Lithium Metal Batteries

Synchronously Stabilizing the Interphase of Cathode and Anode Enabling Lithium Metal Batteries via Multiple Electrolyte Additives

Electrolyte Design for High‐Voltage Lithium‐Metal Batteries with Synthetic Sulfonamide‐Based Solvent and Electrochemically Active Additives

Impact of single vs. blended functional electrolyte additives on interphase formation and overall lithium ion battery performance

Constructing the polymer molecules to regulate the electrode/electrolyte interface to enhance lithium-metal battery performance.

The Synergistic Effect of Cation and Anion of an Ionic Liquid Additive for Lithium Metal Anodes

Compositionally Sequenced Interfacial Layers for High‐Energy Li‐Metal Batteries

Improving electric field strength of interfacial electric double layer and cycle stability of Li-ion battery via LiCl additive

Regulating the Electrode-Electrolyte Interfaces of Lithium-High Nickel Batteries via a Multifunctional Additive

The Practice of Rational Designs of Electrolyte Additives for Lithium Batteries

An Interphase Engineering Method of Stabilizing Ni‐rich Cathode in Lithium‐ion Batteries by A Nucleophilic‐based Additive

Tuning the Nucleophilicity of Anion in Lithium Salt to Enable an Anion‐Rich Solvation Sheath for Stable Lithium Metal Batteries