Abstract:In this study, we investigate the mechanical behavior of large concrete structures affected by the alkali-silica reaction. Particularly, concrete dams are explored. Their permanent contact with water, and thus increased humidity, promotes the ASR. Seasonal variation of the environmental temperature causes different levels of concrete damage in “cold” and “warm” zones. In order to study the behavior of such structures, a thermo-mechanical multi-scale numerical model is developed. It is based on the algorithm proposed by Cuba Ramos [1]. Simulations are performed at the macroand meso-scales, both of which are handled by the finite element method. An elastic thermo-mechanical simulation, performed at the macro-scale, results in a temperature and displacement field. This information at every integration point of the macro-scale is communicated to a corresponding representative volume element (RVE) at the meso-scale. The temperature value is used to determine the gel expansion rate for the following time step. Advancement of the ASR at the level of RVEs leads to gel expansion, deformation of the matrix, and growth of cracks. Given the solution of an RVE problem, homogenized material properties are extracted and communicated to the corresponding integration point of the macro-structure. In the next loading step, the latter behaves according to local states of material throughout a structure. Concrete damaging process is locally driven by gel volume increase, which in its turn depends on the rate of alkali-silica reaction. An equation used to relate the ambient temperature and the amount of available reactants to the gel strain rate is inspired by the Arrhenius law. Parameters of this equation are calibrated based on the experiments by Gautam & Panesar [2]. Cracks in concrete are handled by a continuum damage model. Convergence of the static solution in the presence of multiple cracks is achieved by modification of the sequential linear analysis proposed by Rots and Invernizzi [3]. The cement paste at the meso-scale behaves viscoelastically, which causes relaxation of stresses and reduction in the level of damage. For this purpose, an algorithm coupling the SLA with the general viscoelastic model is developed. REFERENCES [1] Ramos A. I. C., Roux-Langlois C., Dunant C. F., Corrado M., Molinari J.-F. 2018. HPC simulations of alkali-silica reaction-induced damage: Influence of alkali-silica gel properties. Cement and Concrete Research, 109:90 – 102. [2] B. P. Gautam and D. K. Panesar. 2016. A new method of applying long-term multiaxial stresses in concrete specimens undergoing ASR, and their triaxial expansions. Materials and Structures, 49(9):34953508. [3] J. Rots and S. Invernizzi. 2004. Regularized sequentially linear saw-tooth softening model. International Journal for Numerical and Analytical Methods in Geomechanics, 28(7-8):821–856.

Unrestrained ASR volumetric expansion for mass concrete structures: Review and experimental investigation using 3d laser scanning

A Novel Multiscale Modelling Approach for Evaluation of the ASR in Concrete Structures

Concrete Expansion Induced by Alkali–Silica Reaction in a Small Arch Dam

Continuous expansion measurement in accelerated concrete prism testing for verifying ASR-expansion models

Modelling the mechanical behaviour of concrete subjected to Alkali-Silica Reaction (ASR) under multi-axial stress

Correlating alkali-silica reaction (ASR) induced expansion from short-term laboratory testings to long-term field performance: A semi-empirical model

Alkali-silica reaction expansion model for confined concrete with stress-dependency and casting direction anisotropy

Numerical and experimental study of ASR in concrete at the meso-level

Integrative experimental and numerical study of ASR affected nuclear concrete containments

Experimental investigation of ASR-affected concrete – The influence of uniaxial loading on the evolution of mechanical properties, expansion and damage indices

Online Monitoring of the Expansion of Alkali-Silica Reaction Affected Concrete Prisms Implemented to the Accelerated Concrete Prism Test at 60 °C

A Review of Numerical Models for the Performance Assessment of Concrete Structures Affected by Alkali-Silica Reaction

An in-situ 3D micro-XRD investigation of water uptake by alkali-silica-reaction (ASR) product

Monitoring of dielectric permittivity in accelerated alkali-silica reaction concrete with microwave backscattering

Effects of Aggregate Shapes and Other Factors on ASR-Induced Anisotropic Expansions in Concrete

Influence of creep and stress states on alkali-silica reaction induced-expansion of concrete under restraint

Mesoscopic simulation of crack propagation and bond behavior in ASR damaged concrete with internal/external restraint by 3D RBSM

Numerical modeling of ASR: an updated semi-empirical model

A study into the alkali-silica reactivity of recycled concrete aggregates and the role of the extent of damage in the source structures: Evaluation, accelerated testing, and preventive measures

Experiments-based multi-scale modeling of the alkali-silica reaction in concrete

Long-Term Monitoring of RC Beams under Different Partial Alkali–Silica Reactions: Experimental Results and Restraint Mechanisms