Abstract:In this study, we investigate the mechanical behavior of large concrete structures affected by the alkali-silica reaction. Particularly, concrete dams are explored. Their permanent contact with water, and thus increased humidity, promotes the ASR. Seasonal variation of the environmental temperature causes different levels of concrete damage in “cold” and “warm” zones. In order to study the behavior of such structures, a thermo-mechanical multi-scale numerical model is developed. It is based on the algorithm proposed by Cuba Ramos [1]. Simulations are performed at the macroand meso-scales, both of which are handled by the finite element method. An elastic thermo-mechanical simulation, performed at the macro-scale, results in a temperature and displacement field. This information at every integration point of the macro-scale is communicated to a corresponding representative volume element (RVE) at the meso-scale. The temperature value is used to determine the gel expansion rate for the following time step. Advancement of the ASR at the level of RVEs leads to gel expansion, deformation of the matrix, and growth of cracks. Given the solution of an RVE problem, homogenized material properties are extracted and communicated to the corresponding integration point of the macro-structure. In the next loading step, the latter behaves according to local states of material throughout a structure. Concrete damaging process is locally driven by gel volume increase, which in its turn depends on the rate of alkali-silica reaction. An equation used to relate the ambient temperature and the amount of available reactants to the gel strain rate is inspired by the Arrhenius law. Parameters of this equation are calibrated based on the experiments by Gautam & Panesar [2]. Cracks in concrete are handled by a continuum damage model. Convergence of the static solution in the presence of multiple cracks is achieved by modification of the sequential linear analysis proposed by Rots and Invernizzi [3]. The cement paste at the meso-scale behaves viscoelastically, which causes relaxation of stresses and reduction in the level of damage. For this purpose, an algorithm coupling the SLA with the general viscoelastic model is developed. REFERENCES [1] Ramos A. I. C., Roux-Langlois C., Dunant C. F., Corrado M., Molinari J.-F. 2018. HPC simulations of alkali-silica reaction-induced damage: Influence of alkali-silica gel properties. Cement and Concrete Research, 109:90 – 102. [2] B. P. Gautam and D. K. Panesar. 2016. A new method of applying long-term multiaxial stresses in concrete specimens undergoing ASR, and their triaxial expansions. Materials and Structures, 49(9):34953508. [3] J. Rots and S. Invernizzi. 2004. Regularized sequentially linear saw-tooth softening model. International Journal for Numerical and Analytical Methods in Geomechanics, 28(7-8):821–856.

Long-Term Monitoring of RC Beams under Different Partial Alkali–Silica Reactions: Experimental Results and Restraint Mechanisms

Flexural Behavior and Durability Properties of Recycled Aggregate Concrete (RAC) Beams Subjected to Long-Term Loading and Chloride Attacks

Long-term ultrasonic monitoring of concrete affected by alkali-silica reaction

Concrete Expansion Induced by Alkali–Silica Reaction in a Small Arch Dam

Alkali-silica reaction expansion model for confined concrete with stress-dependency and casting direction anisotropy

The flexural mechanical properties and mesoscopic mechanisms of fracture failure of HPC with ASR inhibition measures under prolonged alkaline solution immersion

A Computational Study of the Shear Behavior of Reinforced Concrete Beams Affected from Alkali–Silica Reactivity Damage

Effect of alkali-silica reaction on the flexural behavior of beams with tensile lap splices

Mechanical Properties and Mesoscopic Numerical Simulation of Local Weakening in High-Performance Concrete after 10 Years of Alkali Solution Immersion

Failure criteria and microstructure evolution mechanism of the alkali–silica reaction of concrete

Time-dependent Effect of Expansion due to Alkali-silica Reaction on Mechanical properties of Concrete

Analytical Study on the Load-Bearing Performance of RC Beams Subjected to ASR Expansion

Online Monitoring of the Expansion of Alkali-Silica Reaction Affected Concrete Prisms Implemented to the Accelerated Concrete Prism Test at 60 °C

A study into the alkali-silica reactivity of recycled concrete aggregates and the role of the extent of damage in the source structures: Evaluation, accelerated testing, and preventive measures

THE STRUCTURAL PERFORMANCE OF CONCRETE AFFECTED BY ALKALI-SILICA REACTION

Changes in mechanical properties and durability indices of concrete undergoing ASR expansion

Simulation of concrete structures deformation affected by alkali–silica reaction considering environmental conditions and multiaxial stress state

Experiments-based multi-scale modeling of the alkali-silica reaction in concrete

INVESTIGATION OF FACTORS INFLUENCING THE EXPANSIVE BEHAVIOUR, COMPRESSIVE STRENGTH AND MODULUS OF RUPTURE OF ALKALI-SILICA REACTIVE CONCRETE USING LABORATORY CONCRETE MIXES

Development of Enhanced Test Methods to Evaluate Alkalisilica Reaction in Concrete

UNDERSTANDING THE FACTORS AFFECTING EXPANSION DUE TO ALKALI-SILICA REACTION IN CONCRETE