Strengthening Reinforced Concrete Beams through Integration of CFRP Bars, Mechanical Anchorage System, and Concrete Jacketing

Mahmood Y. Alkhateeb,Farzad Hejazi

DOI: https://doi.org/10.3390/ma17122794

IF: 3.4

2024-06-08

Materials

Abstract:The demand for strengthening reinforced concrete (RC) structures has increased considerably. Implementing carbon-fiber-reinforced polymer (CFRP) bars and concrete jacketing are the most effective techniques for RC beam retrofitting. Using the mechanical anchorage system (MAS) to attach CFRP bars to old concrete is highly recommended to avoid any debonding when it is applied to cyclic loads. However, the design of strengthening details is the most challenging issue because it involves many effective parameters. In this study, a design process for strengthening beams using CFRP bars with new MASs and concrete jacketing is proposed, and various design schemes are studied. The number of applied MASs and the thickness and grade of the concrete jacket were investigated through experimental testing and finite element (FE) simulations to define strengthening design details, such as the number and size of employed CFRP bars. Accordingly, an analytical technique was formulated to predict the performance of the strengthened beam in terms of the nominal ultimate load. The results demonstrated the high performance of the proposed system in preventing premature debonding. The proposed system enhances the beam capacity from 44 kN to 83 kN, representing an increase of more than 90%. In contrast, the conventional near-surface mounted (NSM) system exhibits a lower percentage increase at less than 37%. Both FE simulations and analytical approaches can be effectively employed to predict the behavior and capacity of the strengthened beam while considering various design parameters.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The paper aims to address the issues present in the reinforcement process of reinforced concrete (RC) beams, particularly the defects in traditional reinforcement methods such as near-surface mounted (NSM) technology, for example, premature debonding. The authors propose a new reinforcement system that combines carbon fiber reinforced polymer (CFRP) rods, a mechanical anchorage system (MAS), a concrete jacket, and adhesive epoxy resin to improve the performance of RC beams.

Specifically, the objectives of the paper are:
1. **Address the limitations of traditional reinforcement methods**: Overcome the shortcomings of traditional methods by introducing a new reinforcement system, particularly targeting the issue of premature debonding.
2. **Enhance the load-bearing capacity of RC beams**: Validate the effectiveness of the new system through experiments and study the impact of different design parameters (such as CFRP rod diameter, the number of MAS units, and the grade and thickness of the concrete jacket) on the reinforcement effect.
3. **Develop a finite element model**: Use finite element analysis (FE) models to predict the behavior and load-bearing capacity of reinforced RC beams under different design parameters.
4. **Establish an analytical model**: Propose an analytical method to predict the nominal ultimate load of reinforced RC beams.

Through the above research, the paper demonstrates that the new system can significantly enhance the load-bearing capacity and ductility of RC beams. Compared to the traditional NSM system, the new system's improvement exceeds 90%, while the traditional NSM system's improvement is less than 37%. Additionally, the paper explores how improving the adhesive can further delay or eliminate premature debonding, thereby more effectively enhancing the beam's load-bearing capacity.