Spectra-based color correction method of liquid crystal displays

Tong Wu,Lvming Lv,Zhiyi Wang,Zhijie Huang,Xufen Xie

DOI: https://doi.org/10.1364/oe.534063

IF: 3.8

2024-08-31

Optics Express

Abstract:Tong Wu, Lvming Lv, Zhiyi Wang, Zhijie Huang, Xufen Xie Reproducing colors under different ambient illumination conditions is a critical issue for monitors. This paper proposes a spectral-based ... [Opt. Express 32, 32691-32702 (2024)]

optics

What problem does this paper attempt to address?

Stray Light And Bandpass Correction In The Spectral Measurement For Light Emitting Diodes

Shen Hai-Ping,Pan Jian-Gen,Feng Hua-Jun,Xu Zhi-Hai

DOI: https://doi.org/10.3964/j.issn.1000-0593(2009)06-1493-05

2009-01-01

Abstract:The present paper introduces the stray light and bandpass correction methods for spectrometers. The line spread function of spectrometer is characterized by a He-Ne laser. Assuming that the spectrometer is a wavelength invariable system, the stray light distribution matrix is constructed by the derived line spread functions. The stray light correction matrix is then derived by matrix conversion from the stray light distribution matrix. The measured signals of the spectrometer are finally multiplied by the stray light correction matrix to correct the stray light errors. The bandpass functions of the spectrometer are characterized in three different wavelength ranges, respectively. And then three groups of bandpass correction coefficients are calculated accordingly. The calculation is divided into several steps. Given the measurement results at the target wavelength position and the ones on the neighbor bandwidths, the bandpass correction results are obtained by weight averaging of them. The bandpass correction coefficients are used as the weights. The two correction methods are applied to a multi-channel fast spectrometer to measure LEDs of different color. The results show that the stray light and the bandpass errors can be corrected effectively. The chromaticity coordinates of the LEDs are corrected by (-0.003, 0.007) for the maximum. Furthermore, the method introduced in this paper can reduce the application cost, simplify the calculation under a reasonable precision, and make the application of the correction easier.
A Study on Correction Systemic Algorithm for LCD Projection Display Color Uniformity

Zhang Yi,Liu Xu,Li Haifeng

DOI: https://doi.org/10.1016/j.phpro.2012.05.250

2012-01-01

Physics Procedia

Abstract:According to the application of two-dimensional CCD camera and the computer composing principles and characteristics of uniformity correction system of LCD projection display color, this paper experiments, analyzes and compares the process of seeking color correction value between improved binary algorithm and traditional stepping technique. The experimental results indicate that, compared with traditional stepping technique, the advantage of improved binary algorithm lies in the fact that it has universal adaptability and can be applied to the color uniformity correction of LCD projection system with various optical properties; besides, it has uniform convergence as to the search of correction value in different areas in the process of correction, which enables the correction time of the projection system to be a constant; what's more, in comparison with stepping technique, improved binary algorithm has a higher algorithmic efficiency with the same precision and its correction time reduces to 60% of the stepping technique. The related experiment shows that improved binary algorithm is the ideal algorithm that appropriate to be applied in the display color uniformity correction of LCD projection system.
Color Crosstalk Characterization of PDP Displays by Spectroradiometry

Jianping Wang

2008-01-01

Abstract:Color crosstalk is a special defect of Plasma Display Panel (PDP).The causes of the color crosstalk are introduced firstly. Then, a novel method based on the spectroradiometry for color crosstalk characterization is presented. It measures the spectral radiance distribution of red, green and blue homochromous cells. Next, the spectral radiance distributions of the area which includes enough pixels are measured in the red, green, blue full screen. Several equations for the characterization coefficients can be built. The data in the wavelength ranges which include enough spectrum radiance power for homochromous cells are selected to calculate.These coefficients of crosstalk could be easily got in this way. Then, the experimental results of color crosstalk are analyzed. It is indicated that the spectroradiometric method is an effective method for characterizing color crosstalk.
The Correction Method Based on Optimal Solution in Digital Imaging system

郝静如,冯华君,刘木清

DOI: https://doi.org/10.15943/j.cnki.fdxb-jns.2010.03.021

2010-01-01

Abstract:Color distortion may exist during image processing,due to spectral response sensitivity of image sensor and transmittance spectrum of lens.Color information plays a crucial role in image analysis.Therefore,as for digital imaging system,it is useful to study evaluation,detection and correction methods of color reappearance ability.Here,it proposes a novel color correcting approach that can significantly reduces color distortion.It corrects the color of image by computing optimal correction matrix in CIELAB color space with mathematical method.The experimental results of standard color plate pictures show that the optimal solution algorithm can reduce the value of color difference significantly in every color block,and an integrated correction of color distortion has achieved.
Color Purity and Color Uniformity of Liquid Crystal Projection Display

郑臻荣,顾培夫

DOI: https://doi.org/10.3969/j.issn.1003-501X.2002.05.009

2002-01-01

Abstract:The influence of color splitting system for liquid crystal projection display on color purity and color uniformity of an image is analyzed with color standards of 1931CIE and 1976CIE. The coatings design of the color splitting system is introduced. Compared with the typical color splitting coatings, the color purity, especially for green light, is obviously improved since the ripple in band of the optimized coatings is obviously reduced. The influence of aperture angle for illumination light on uniformity of the color splitting system is discussed and a color aberration correction by means of wedge coating with. gradient thickness is proposed, thus the color uniformity can be obviously improved.
Measurement and Correction System of Color Uniformity of Liquid Crystal Projection Display

陈颖,李海峰,刘旭

DOI: https://doi.org/10.3969/j.issn.1003-501x.2004.12.012

2004-01-01

Abstract:A measurement and correction system of color uniformity of LCD projection system consisting of video test signal generator, screen, CCD and computer is proposed. The system makes use of 2-D CCD because of its characteristic of rapid collection of two-dimensional image. Based on the time-divided measurement of two-dimensional brightness distribution of three primary colors on the screen, the correction data are obtained to adjust the output intensity ratio of three colors in order to realize color uniformity correction of LCD projection. The experiment results show that, after correction, the standard deviation of the difference between the chromaticity coordinates of each area of the screen and the average color coordinate is 5.23×10-4. It is only 10.46% of the corresponding one before correction. The color uniformity of the screen increases about one magnitude.
Lighting Deviation Correction for Integrating-Sphere Multispectral Imaging Systems.

Zhe Zou,Hui-Liang Shen,Shijian Li,Yunfang Zhu,John H. Xin

DOI: https://doi.org/10.3390/s19163501

IF: 3.9

2019-01-01

Sensors

Abstract:In an integrating sphere multispectral imaging system, measurement inconsistency can arise when acquiring the spectral reflectances of samples. This is because the lighting condition can be changed by the measured samples, due to the multiple light reflections inside the integrating sphere. Besides, owing to non-uniform light transmission of the lens and narrow-band filters, the measured reflectance is spatially dependent. To deal with these problems, we propose a correction method that consists of two stages. The first stage employs a white board to correct non-uniformity and a small white patch to correct lighting deviation, both under the assumption of ideal Lambertian reflection. The second stage uses a polynomial regression model to further remove the lighting inconsistency when measuring non-Lambertian samples. The method is evaluated on image data acquired in a real multispectral imaging system. Experimental results illustrate that our method eliminates the measurement inconsistency considerably. This consequently improves the spectral and colorimetric accuracy in color measurement, which is crucial to practical applications.
Estimation of the Perceptual Color Gamut on Displays.

Lihao Xu,Qichen Ye,Ming Ronnier Luo

DOI: https://doi.org/10.1364/oe.472808

IF: 3.8

2022-01-01

Optics Express

Abstract:A new method was developed to evaluate the perceived gamut of a display. A multispectral image of a white gypsum sphere was projected onto various highly chromatic lights, producing a series of images with distinct hue perceptions at the gamut boundary of displays. These images were subsequently used in a psychophysical experiment to examine the perceived color gamut. Afterwards, the visual results were further compared with the prediction results from various uniform color spaces (UCSs) and color appearance models (CAMs). The present results demonstrate that CAM16-UCS provides the most accurate prediction across the entire color gamut, whereas the cyan-to-blue region is more poorly predicted than the other hue regions for all CAMs and UCSs investigated.
Visual consistency between display simulation and real scene observation: a case study for color preference assessment for illuminated scenes

Xinwei Wu,Zhiyu Chen,Qiang Liu

DOI: https://doi.org/10.1364/oe.532599

IF: 3.8

2024-10-05

Optics Express

Abstract:Xinwei Wu, Zhiyu Chen, Qiang Liu Display-based simulation has been widely adopted across various research fields, yet the visual consistency between this technique and real ... [Opt. Express 32, 37840-37855 (2024)]

optics
Methods to Improve Colour Mismatch Between Displays

Keyu Shi,Ming Ronnier Luo

DOI: https://doi.org/10.2352/issn.2169-2629.2021.29.37

2021-01-01

Abstract:With the rapid development of display technology, the colour mismatch of the colours having same tristimulus values between devices is an urgent problem to be solved. This is related to the wellknown problem of observer metamerism, caused by the spectral power distribution (SPD) of primaries and the difference between individual observers' and the standard CIE colour matching functions. An experiment was carried out for 20 observers to perform colour matching of colour stimuli with a field-of-view of 4° between 5 displays, including two LCD and two OLED, against a reference LCD display. The results were used to derive a matrixbased colour correction method. The method was derived from colorimetric visually matched colorimetric data. Furthermore, different colour matching functions were evaluated to predict the degree of observer metamerism. The results showed that the correction method gave satisfactory results. Finally, it was found that the use of 2006 2° colour matching function outperformed 1931 2° CMFs with a large margin, most marked between an OLED and an LCD display.
Correction of color deviation in multi-layer light field displays

Jie Zhong,Huarong Gu,Hongwei Zhang,Xinyuan Wang,Jie Chen,Rongxing Deng

DOI: https://doi.org/10.1117/12.2686312

2023-01-01

Abstract:Among current true 3D display technologies, multi-layer 3D displays based on the principle of compressive light field have the advantages of high resolution, simple structure and faithful restoration of depth cues, demonstrating enormous research value and application potential. In recent years, multi-layer 3D displays have attracted increasing attention from researchers and some progresses have been made in improving the performance. However, there are still some limitations, such as the color deviation issue which causes unnatural colors of the reconstructed scene. In this paper, we propose using a customized look-up table (LUT) to alleviate the color deviation problem of multi-layer displays. For each of the display layers, we measured the response curves of the RGB channels, respectively, corresponding to different input gray levels. Then we compared them with a commercial standard display, so that we could correct each value within the gray range of the three channels to obtain a target output response, and the corrected values were used to build the look-up table. Using the customized LUT, we successfully achieved correction of color deviation in our multi-layer display system. Finally, we demonstrated a 3D scene with natural colors, proving the effectiveness of our method on correcting the color deviation in multi-layer light field displays.
A Revised Formulation Based on CIECAM16 for Cross-media Colour Reproduction Via Real Scene Experiment

Yuechen Zhu,Ming Ronnier Luo

DOI: https://doi.org/10.2352/cic.2022.30.1.03

2022-01-01

Abstract:In order to reproduce the colour appearance between real scene and images on self-luminous display, this study conducted a series of psychophysical experiments using threshold method. Three types of real scenes were built up in a lighting room, including painting, fruit and vegetable, skin colour chart. Sixteen adapting conditions were designed including four CCTs (3000K, 4500K, 6500K, 8000K) and 4 luminance levels (10lux, 100lux, 500lux, 1000lux). Four displays with different sizes were studied. The result indicated that the colour appearance of real scene and the image on the display were different, especially for low CCT and luminance level. The contents of scene and size of display didn’t show a significate impact. The prediction performance of CIECAM16 was tested, and a revised formulation was proposed with high accuracy.
Support vector machine-based method for colorimetric characterization of computer-controlled liquid crystal displays

Zibing Feng,Siyu Zhao,Shi He,Qi Yao,Jianhua Ding,Xufen Xie

DOI: https://doi.org/10.1117/1.oe.63.2.024104

IF: 1.3

2024-02-08

Optical Engineering

Abstract:This paper proposes a colorimetric characterization method based on support vector machine (SVM) for computer-controlled liquid crystal displays (LCD). First, forward and inverse colorimetric characterization models based on SVM are established for LCD monitors. Second, the radial basis function (RBF) kernel function is introduced to deal with the nonlinear problem of color space conversion. Then, the parameters Gamma, penalty coefficient C, and ε are determined by 10-fold cross-validation grid search optimization. Next, the effectiveness of the method is validated by three brands of monitors; for the forward colorimetric characterization model, the average predicted color differences are 1.259, 1.091, and 1.005 CIELUV units, respectively; for the inverse colorimetric characterization model, the average goodness of fit are 0.985, 0.989, and 0.988, respectively. Finally, the method is compared with piecewise linear assuming variation in a chromaticity model, three-dimensional look-up-table, polynomial regression model, and artificial neural network model, and it is verified that the method is superior to the related colorimetric characterization models in color prediction accuracy. The method can better support the color management and high-fidelity reproduction of monitors.

optics
Colorimetric Characterization of LCD Based on Wavelength Partition Spectral Model

Liu Hao-xue,Cui Gui-hua,Huang Min,Wu Bing,Xu Yan-fang,Luo Ming

DOI: https://doi.org/10.3964/j.issn.1000-0593(2013)10-2751-07

2013-01-01

Abstract:To establish a colorimetrical characterization model of LCDs, an experiment with EIZO CG19, IBM 19, DELL 19 and HP 19 LCDs was designed and carried out to test the interaction between RGB channels, and then to test the spectral additive property of LCDs. The RGB digital values of single channel and two channels were given and the corresponding tristimulus values were measured, then a chart was plotted and calculations were made to test the independency of RGB channels. The results showed that the interaction between channels was reasonably weak and spectral additivity property was held well. We also found that the relations between radiations and digital values at different wavelengths varied, that is, they were the functions of wavelength. A new calculation method based on piecewise spectral model, in which the relation between radiations and digital values was fitted by a cubic polynomial in each piece of wavelength with measured spectral radiation curves, was proposed and tested. The spectral radiation curves of RGB primaries with any digital values can be found out with only a few measurements and fitted cubic polynomial in this way and then any displayed color can be turned out by the spectral additivity property of primaries at given digital values. The algorithm of this method was discussed in detail in this paper. The computations showed that the proposed method was simple and the number of measurements needed was reduced greatly while keeping a very high computation precision. This method can be used as a colorimetrical characterization model.
In Situ Dynamic Study of Color-Changing in Liquid Colloidal Crystals for Electrophoretic Displays

Yiquan Fang,Huateng Li,Xiuli Wang,Mengjing Zhu,Jia Guo,Changchun Wang

DOI: https://doi.org/10.1021/acsanm.2c02391

IF: 6.14

2022-01-01

ACS Applied Nano Materials

Abstract:chromic photonic crystals (ECPCs), are of great interest to researchers due to their convenient control approach, wide color regulation range, fast response, and low power consumption. Herein, liquid colloidal crystals (LCCs) of SiO2 nanospheres were prepared through an evaporation-induced self-assembly method and used as a reflective unit for fabricating dynamic ECPC devices. The ECPC device exhibited brilliant controllable structural color across the visible spectrum under low voltages (<3.5 V). Based on the in situ ultra-small-angle X-ray scattering results and reflective spectra, regulatory rules of the dynamic ECPC device concerning a color tunable range, reflectance intensity, response speed, and cyclic performance were set up, and the relationship between slurry concentration, electrode spacing, and viewing angle was established. Furthermore, a dynamic mechanism was revealed for explaining the responsive behaviors of reflection spectra during the electrical modulation, which is significant for the development of ECPC devices in the future. Based on the parameter optimization and structure design of the dynamic ECPC device, a pressure-responsive electrochromic prototype device was constructed with rapid response, dynamic structural color, and good reversibility, which demonstrated its great potential in reflective display units and multifunctional sensors.
Cooling colors below ambient temperature

Wanlin Wang,Hongyun Xing,Xiaochi Shu,Xinkun Zhao,Xiaoyuan Yan,Binbin Hong,Lei Sun,Wang Zhang,Guo Ping Wang,hyun xing,xchi shu,xink zhao,xyun yan,BinBin Hong

DOI: https://doi.org/10.1364/optica.487561

IF: 10.4

2023-08-04

Optica

Abstract:Wanlin Wang, Hongyun Xing, Xiaochi Shu, Xinkun Zhao, Xiaoyuan Yan, Binbin Hong, Lei Sun, Wang Zhang, Guo Ping Wang The colors of objects originate from reflection of light in certain directions and absorption of undesired light, producing substantial ... [Optica 10, 1059-1066 (2023)]

optics
Compromising circadian performance and color gamut Rec. 2020 for achieving healthy LED displays

Shanrong Ke,Xiaoting Xue,Rongting Jin,Bingui Lv,Mingkai Huang,Jingxuan Sun,Meixue Chen,Yixuan Lu,Meicong Huang,Yu Yang,Xinqin Liao,Huanhua Wang,Meibin Yao,Ziquan Guo,Zhong Chen

DOI: https://doi.org/10.1016/j.ijleo.2023.170864

IF: 3.1

2023-07-01

Optik

Abstract:With the fast development of red (R), green (G), and blue (B) mini or micro light-emitting diode (LED) based displays, which can be possibly applied in the smartphones, smartwatches, and augmented reality/virtual reality devices, the non-visual biological performances, such as the circadian effects referring to the human health, of displays could not be fully ignored. In this current work, we conduct a spectral optimization study on the color gamut which is evaluated by Rec. 2020 standard versus circadian performances. First, a spectral model based on the Boltzmann distribution is adopted for precisely mimicking the emission spectra of red (R), green (G), and blue (B) LEDs. Then, the common genetic algorithm (GA) is applied for performing the spectral optimization to minimize or maximize circadian effects in terms of several constrained conditions, such as correlated color temperature (CCT) and color distance. Finally, we believe that this simulation work can serve as a useful guidance for achieving both healthy and high-color-performance LED displays with wide color gamut larger than 90% Rec. 2020.

optics
High-efficiency color separation method based on fractional Talbot effect for color liquid crystal display

Qiaofeng Tan,Yan Zhang,Yingbai Yan,Guofan Jin

DOI: https://doi.org/10.1016/j.optcom.2008.09.057

IF: 2.4

2008-01-01

Optics Communications

Abstract:Based on the fractional Talbot effect of Talbot grating, a new method with high light efficiency for color separation in color liquid crystal displays (LCDs) is proposed. The light efficiency of 85% and 89% are obtained by three- and four-step Talbot gratings, respectively, which are rather higher than that of using color filter, the traditional color separation method in color LCDs. This method has large tolerance to the position error of the color separation plane, the wavelength changes of red, green and blue colors, and the step height errors of the gratings.
Exploration of gamma correction in liquid crystal light valve system

Chen Shuiqiao,Chen Hongshan

DOI: https://doi.org/10.16791/j.cnki.sjg.2009.01.010

2009-01-01

Abstract:Theory of gamma correction in liquid crystal light valve system was explored.Equivalent model of validating gamma correction in existence was given.Validating method of experiment of Windows palette making color instead of color change was designed.Infection of differ colors to gamma correction in same theoretical grayscale was explored.Some conclusion and discussion are given.Some satisfied results are shown.
Applying image‐based color palette for achieving high image quality of displays

hungshing chen,shihhan chen,yenhsiang chao,m ronnier luo,peili sun

DOI: https://doi.org/10.1002/col.21773

2014-01-01

Abstract:In the highly competitive display market, manufacturers continuously develop new technologies to improve the image quality of displays. However, color measurement and visual assessment are time-consuming to production lines. A new method to measure and improve color quality of the displays automatically therefore, is urgently needed to the manufacturers. This article proposes a familiar color correction strategy to optimize the colors of different displays by means of creating an image-based color palette which enables color correction for familiar objects (e.g., facial skin, blue sky, or green grass) in the multidisplay systems. To produce the image-based color palette, the 8-bit RGB value of each pixel in an image is transformed to L*d*n* (lightness/dominant color/nondominant color) color channels, and the dominant-color regions in an image are subsequently extracted from the dominant color (d*) channel. The memory color data of familiar objects can be set in reference monitor in advance to determine the dominant color (d*) channel. Then a series of palette colors are generated around a displayed image. The color palette will be displayed as a target for two-dimensional colorimeter shooting to obtain the measured color data. The familiar color correction model was established based on a first-order polynomial regression to achieve a polynomial fit between the measured color data and the reference color data on the color palette. The proposed method provides a solution to correct familiar colors on a displayed image, and maintains the original color gamut and tone characteristic in the multidisplay systems simultaneously. It is possible to achieve the preferred intent of the displayed images by using the proposed familiar color correction method. (c) 2012 Wiley Periodicals, Inc.

Spectra-based color correction method of liquid crystal displays

Stray Light And Bandpass Correction In The Spectral Measurement For Light Emitting Diodes

A Study on Correction Systemic Algorithm for LCD Projection Display Color Uniformity

Color Crosstalk Characterization of PDP Displays by Spectroradiometry

The Correction Method Based on Optimal Solution in Digital Imaging system

Color Purity and Color Uniformity of Liquid Crystal Projection Display

Measurement and Correction System of Color Uniformity of Liquid Crystal Projection Display

Lighting Deviation Correction for Integrating-Sphere Multispectral Imaging Systems.

Estimation of the Perceptual Color Gamut on Displays.

Visual consistency between display simulation and real scene observation: a case study for color preference assessment for illuminated scenes

Methods to Improve Colour Mismatch Between Displays

Correction of color deviation in multi-layer light field displays

A Revised Formulation Based on CIECAM16 for Cross-media Colour Reproduction Via Real Scene Experiment

Support vector machine-based method for colorimetric characterization of computer-controlled liquid crystal displays

Colorimetric Characterization of LCD Based on Wavelength Partition Spectral Model

In Situ Dynamic Study of Color-Changing in Liquid Colloidal Crystals for Electrophoretic Displays

Cooling colors below ambient temperature

Compromising circadian performance and color gamut Rec. 2020 for achieving healthy LED displays

High-efficiency color separation method based on fractional Talbot effect for color liquid crystal display

Exploration of gamma correction in liquid crystal light valve system

Applying image‐based color palette for achieving high image quality of displays