Abstract:To realize the goal of large scale eco-friendly solid-state Na-ion energy storage systems, a combination of cost effective and resource abundant anode material, and a bio-degradable polymer-based electrolyte is essentially required. Herein, a highly abundant waste-biomass sugarcane bagasse, pre-treated with ethanol soaking has been used as precursor to drive hard carbon (EHC) to use as anode in sodium-ion batteries (NIBs) with a sodium ion conducting porous polymer electrolyte (PPE) based on a bio-degradable polymer poly-ε-caprolactone (PCL). The pre-treatment with ethanol soaking for a long duration improves the porosity and electrochemical properties of the hard carbons significantly. The EHC powder shows lesser surface area (∼19 m 2 g −1 ) with larger average pore size as compared to hard carbon (HC) derived from untreated waste-biomass powder (∼407 m 2 g −1 ). The EHC powder also shows larger number of defects and oxygen content, as evident from XRD, Raman and XPS analyses. The porous PCL film has been prepared by one-step immersion-precipitation method with water as non-solvent and N -methyl-2-pyrrolidone (NMP) as solvent to obtain thick, free-standing PPE films, soaked with a liquid electrolyte (1 M NaClO 4 in EC:PC, 1:1 v/v). The comparative electrochemical performance of the hard carbons (EHC and HC) as anodes has been tested by preparing half cells with PPE-films and liquid electrolyte soaked in commercial separator. The PPE is found to be suitable for application in NIBs due to its high ionic conductivity (∼1.7 mS cm −1 ) and wide electrochemical potential window (∼5.2 V vs Ag/Ag + ). The electrochemical cell based on EHC-anode demonstrates excellent performance characteristics showing high reversible discharge capacity of 212 mAhg −1 with biodegradable PPE-film at current rate of 0.5 Ag −1 and shows stable performance up to high current rate of 1 Ag −1 . The cell also shows long term cycling stability up to 300 cycles with ∼17 % initial fading in specific discharge capacity.

Sustainable and efficient energy storage: A sodium ion battery anode from Aegle marmelos shell biowaste

A Life Cycle Assessment of Hard Carbon Anodes for Sodium-Ion Batteries

Hard carbon anode derived from pre-treated bio-waste sugarcane bagasse for high capacity sodium-ion battery fabricated with bio-deFgradable porous polymer electrolyte

Low-Cost and High-Performance Hard Carbon Anode Materials for Sodium-Ion Batteries

Sodium‐Ion Batteries: Hard–Soft Carbon Composite Anodes with Synergistic Sodium Storage Performance (adv. Funct. Mater. 24/2019)

Bio-Waste-Derived Hard Carbon Anodes Through a Sustainable and Cost-Effective Synthesis Process for Sodium-Ion Batteries

A Green Route N, S-Doped Hard Carbon Derived from Fruit-Peel Biomass Waste as an Anode Material for Rechargeable Sodium-Ion Storage Applications

On the Road to Sustainable Energy Storage Technologies: Synthesis of Anodes for Na-Ion Batteries from Biowaste

Electrochemical Characterization of Charge Storage at Anodes for Sodium‐Ion Batteries Based on Corncob Waste‐Derived Hard Carbon and Binder

A Stable Biomass‐Derived Hard Carbon Anode for High‐Performance Sodium‐Ion Full Battery

Pomegranate Peel-Derived Hard Carbons as Anode Materials for Sodium-Ion Batteries

Optimizing Hard Carbon Anodes from Agricultural Biomass for Superior Lithium and Sodium Ion Battery Performance

A porous biomass-derived anode for high-performance sodium-ion batteries

The Induced Formation and Regulation of Closed-Pore Structure for Biomass Hard Carbon As Anode in Sodium-Ion Batteries

Interlaced Micro-Fibrous Hard Carbon As Superior Anode for Na-Ion Battery: Insights into the Sodium Storage Mechanism and Solid Electrolyte Interface

Insights into the electrochemical properties of bagasse-derived hard carbon anode materials for sodium-ion battery

Waste-to-wealth: low-cost hard carbon anode derived from unburned charcoal with high capacity and long cycle life for sodium-ion/lithium-ion batteries

Tailored Carbon Anodes Derived from Biomass for Sodium-Ion Storage

Sustainable Fabrication of a Practical Hard Carbon Anode for a Sodium-Ion Battery with Unprecedented Long Cycle Life

Sustainable conversion of vine shoots and pig manure into high-performance anode materials for sodium-ion batteries