Abstract:To realize the goal of large scale eco-friendly solid-state Na-ion energy storage systems, a combination of cost effective and resource abundant anode material, and a bio-degradable polymer-based electrolyte is essentially required. Herein, a highly abundant waste-biomass sugarcane bagasse, pre-treated with ethanol soaking has been used as precursor to drive hard carbon (EHC) to use as anode in sodium-ion batteries (NIBs) with a sodium ion conducting porous polymer electrolyte (PPE) based on a bio-degradable polymer poly-ε-caprolactone (PCL). The pre-treatment with ethanol soaking for a long duration improves the porosity and electrochemical properties of the hard carbons significantly. The EHC powder shows lesser surface area (∼19 m 2 g −1 ) with larger average pore size as compared to hard carbon (HC) derived from untreated waste-biomass powder (∼407 m 2 g −1 ). The EHC powder also shows larger number of defects and oxygen content, as evident from XRD, Raman and XPS analyses. The porous PCL film has been prepared by one-step immersion-precipitation method with water as non-solvent and N -methyl-2-pyrrolidone (NMP) as solvent to obtain thick, free-standing PPE films, soaked with a liquid electrolyte (1 M NaClO 4 in EC:PC, 1:1 v/v). The comparative electrochemical performance of the hard carbons (EHC and HC) as anodes has been tested by preparing half cells with PPE-films and liquid electrolyte soaked in commercial separator. The PPE is found to be suitable for application in NIBs due to its high ionic conductivity (∼1.7 mS cm −1 ) and wide electrochemical potential window (∼5.2 V vs Ag/Ag + ). The electrochemical cell based on EHC-anode demonstrates excellent performance characteristics showing high reversible discharge capacity of 212 mAhg −1 with biodegradable PPE-film at current rate of 0.5 Ag −1 and shows stable performance up to high current rate of 1 Ag −1 . The cell also shows long term cycling stability up to 300 cycles with ∼17 % initial fading in specific discharge capacity.

Insights into the electrochemical properties of bagasse-derived hard carbon anode materials for sodium-ion battery

Interlaced Micro-Fibrous Hard Carbon As Superior Anode for Na-Ion Battery: Insights into the Sodium Storage Mechanism and Solid Electrolyte Interface

A Life Cycle Assessment of Hard Carbon Anodes for Sodium-Ion Batteries

Hard carbon derived from waste tea biomass as high-performance anode material for sodium-ion batteries

Sodium‐Ion Batteries: Hard–Soft Carbon Composite Anodes with Synergistic Sodium Storage Performance (adv. Funct. Mater. 24/2019)

The Induced Formation and Regulation of Closed-Pore Structure for Biomass Hard Carbon As Anode in Sodium-Ion Batteries

A Stable Biomass‐Derived Hard Carbon Anode for High‐Performance Sodium‐Ion Full Battery

Electrochemical Behavior of the Biomass Hard Carbon Derived from Waste Corncob as a Sodium-Ion Battery Anode

Electrochemical Characterization of Charge Storage at Anodes for Sodium‐Ion Batteries Based on Corncob Waste‐Derived Hard Carbon and Binder

Design of the Particle Size and Morphology of Hard Carbon Anode Materials for Sodium-Ion Batteries Through Hydrothermal Carbonization

Hard carbon anode derived from pre-treated bio-waste sugarcane bagasse for high capacity sodium-ion battery fabricated with bio-deFgradable porous polymer electrolyte

Sulfur-doping biomass based hard carbon as high performance anode material for sodium-ion batteries

Hard Carbon/graphene Microfibers As a Superior Anode Material for Sodium-Ion Batteries

Biomass hard carbon of high initial coulombic efficiency for sodium-ion batteries: Preparation and application

Hierarchical porous hard carbon derived from rice husks for high-performance sodium ion storage

Low-Cost and High-Performance Hard Carbon Anode Materials for Sodium-Ion Batteries

Bagasse-Derived Hard Carbon Anode with an Adsorption–Intercalation Mechanism for High-Rate Potassium Storage

Coupled Carbonization Strategy towards Advanced Hard Carbon for High Energy Sodium-Ion Battery.

Preparation of green high‐performance biomass‐derived hard carbon materials from bamboo powder waste

Sycamore fruit seed‐based hard carbon anode material with high cycle stability for sodium‐ion battery