Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. Aluminum alloy rings are widely used in aerospace, energy, petrochemical, and equipment applications. The loss of roundness often occurs because of the weak rigidity and unstable plasticity of aluminum alloy rings. Therefore, an online measurement technique for the roundness of aluminum alloy rings is critical for ensuring the processing quality of aluminum alloy rings. In this paper, an online roundness measurement method based on the laser ranging principle and improved particle swarm optimization (IPSO) is proposed with the aid of the rotation of the ring during the rolling process. First, the distance from the outer surface of the ring to the laser rangefinder was measured using a triangular laser rangefinder with the help of the rotation of the ring in the rolling process. Second, the distance data were denoized using an improved Kalman filter algorithm to reduce the influence of random noise on the measurement results. Finally, the roundness and geometric center were evaluated using the IPSO algorithm combined with the minimum zone circle (MZC) method and compared with the results obtained using the standard particle swarm optimization (PSO) algorithm, genetic algorithm (GA), and least square (LS) algorithm. The experimental results show that the roundness measured by the IPSO algorithm is less than 0.06 mm, demonstrating better performance in the roundness evaluation. The measurement method for roundness proposed in this paper is suitable for the online evaluation of large aluminum alloy rings, avoiding the influence of ring size on roundness measurement.

Dimension measurement method of ring forgings based on laser scanning and multiple regression filtering algorithm

Research on outer diameter measurement method of ring forging based on standard deviation resampling

A stitching method of radial section line of scanned point cloud data for ring forgings

Study on the Measurement of Global Sizes of Cylindrical Parts Using Talyrond 585LT.

Study on Online Dimension Measurement Method of Large Ring Forging in Heat State

Simple three-dimensional laser radar measuring method and model reconstruction for hot heavy forgings

3D Measuring and Segmentation Method for Hot Heavy Forging

Implementation and Verification of a Dual-Probe Measurement System for Geometric Form Evaluation of a Ring-Type Cylinder

Annular Region Statistical Feature-based Recognition of Bearing Rings under Non-exact Positioning

The real-time vision measurement of multi geometric information of the rolled ring in the hot ring rolling process based on deep learning

Research on Forging Dimension Online Measuring System Based on Vibration Point Cloud Compensation

Research on dynamic measurement of hot ring rolling dimension based on machine vision

Study of real-time parameter measurement of ring rolling pieces based on machine vision

Research on Point Cloud Acquisition and Calibration of Deep Hole Inner Surfaces Based on Collimated Ring Laser Beams

Online measurement method for roundness of large aluminum alloy ring based on laser ranging principle

A machine vision–based radial circular runout measurement method

Three-Dimensional Method Combining Linearly Structured Light Sensing and Rotary Scanning for Measuring Aviation Bearings

Dimension measurement of hot large forgings with a novel time-of-flight system

Research the Dimensional Accuracy of C45 Steel Ring Forgings Produced by Radial Rolling

Research on Angle Setting Error of Diameter Measurement Based on Laser Displacement Sensors

Measure Dimension of Rotating Large Hot Steel Shell Using Pulse Laser on PRRR Robot