Abstract:This article focuses on finding alternatives to CaF2‐containing submerged arc welding fluxes, without a compromise on the thermophysical properties. Three compositions in the CaO–MnO–SiO2–Al2O3 system with varying MnO content are identified as they seem to comply with the required melting behavior. This was estimated using the high‐temperature microscopy, DTA, simulations using FactSage (version8.3) and was found to be comparable with a commercial CaF2 containing welding flux. In addition, simulations using FactSage show the desirable dissolution of Si, Mn and weld pool O content (40–70 ppm) CaF2 has been a very common constituent in the fluxes used for welding of low‐carbon steel plates, owing to its strong ability to lower the liquidus temperature as well as viscosity of the molten flux. But the adverse impact of fluoride evaporation from molten slag on the health of operating personnel and the environment has prompted a worldwide effort to replace CaF2 with more benign constituents. Three compositions with varying MnO concentration in the CaO–MnO–SiO2–Al2O3 system, identified in the current work, have shown promise in terms of ability to control oxygen transfer and modify inclusion generation in the molten metal during the welding of low carbon low alloy steels. However, the melting behavior of a flux needs to be established before recommending its use for welding. Three compositions, with varying MnO concentration, are chosen in the current work. Aided by experimental measurements using high‐temperature microscopy, DTA and simulations using the commercially available thermodynamic package FactSage (version 8.3), this work aims to understand the melting characteristics of the developed fluxes. These characteristics seem to be comparable with a commercial CaF2‐containing welding flux, used as a reference for comparison. In addition, simulations using FactSage suggest that transfer of dissolved O, Si and Mn to the weld metal, while using these fluxes, would be benefitial to performance of the welded joint.

Development of submerged arc welding flux from rice straw ash

Waste to wealth: development of cladding flux from steel slag for submerged arc welding

Waste to wealth: Recycling of steel slag as flux for the submerged arc welding process and its effect on mechanical and metallurgical properties of welds

Utilization of Cow Bone Waste and Calcium Oxide for the Solidification and Stabilization of MSWI Fly Ash: Towards Sustainable Practices

Recycling of steel slag as a flux for submerged arc welding and its effects on chemistry and performance of welds

Influence of welding conditions and flux composition on chemistry of welds using recycled steel slag in submerged arc welding

Experimental investigations and optimization of weld bead characteristics during submerged arc welding using recycled steel slag as a flux

Experimental investigation and optimization of weld bead shape factor and form factor using recycled steel slag as a flux in submerged arc welding process

Effect and Optimization of Welding Parameters and Flux Baking on Weld Bead Properties and Tensile Strength in Submerged Arc Welding of HSLA 100 Steel

Recent developments in friction stir welding and resulting industrial practices

Weld Metal Chemistry of Mineral Waste Added SiO2–CaO–CaF2–TiO2 Electrode Coatings for Offshore Welds

Influence of SAW Flux Ingredients on Chemical Compositions of Weldments of Duplex Steel-2205

Melting Behavior of a CaO–SiO2–Al2O3 Flux with Varying MnO Concentration for Use in Fusion Welding of Low‐Carbon Steel

New technique of in situ rolling friction stir welding

Study of weld bead chemical, microhardness & microstructural analysis using submerged arc welding fluxes for linepipe steel applications

Current Status and Development of Submerged Friction Stir Welding: A Review

Sustainable Alkali Activation: The Role of Water- and Alkali-Treated Sisal Leaf Wastewaters in Solid- Waste-Based Composite Synthesis

Effect of slag recycling on bead geometry, dilution and microstructure in submerged arc cladding of stainless steels

Experiments on effect of red mud-based slag on distribution of sulfur in liquid iron

Comparative Evaluation of Self-Shielded Flux-Cored Wires Designed for High Strength Low Alloy Steel in Underwater Wet Welding: Arc Stability, Slag Characteristics, and Joints’ Quality

Wettability studies of formulated SMAW electrode coating fluxes with regression analysis and neural network approach