Abstract:TiO2/g‐C3N4 hybrids (TCNs) were constructed by an ammonium salt‐assisted hydrothermal‐high temperature calcination method and used to activate peroxymonosulfate (PMS) to degrade multiple simulated pollutants.The PL spectra, transient photocurrents and Nyquist pots of the impedance spectra indicate that TCN1‐4 has a better separation of electron‐hole pairs, which is due to the formation of Z‐scheme heterojunctions between TiO2 and g‐C3N4. In addition, (NH4)2SO4 as a bubble template could significantly increase the specific surface area of TCN1‐4. Based on the above two points, TCN1‐4 has excellent photocatalytic activation performance. A total of 93.8 % of RhB can be removed in 30 min in the TCN1‐4/PMS system, which is comparable to the 60 min removal in the TCN1/PMS system and much higher than that in the g‐C3N4/PMS and TiO2/PMS systems.The degradation of the TCN1‐4/PMS system can still be maintained at 94 % after 30 min under sunlight in the fifth cycle.TCN1‐4/PMS system also has an excellent degradation effect on MO, MB and phenol, under the same reaction conditions, the degradation of MO (76 μmol/L), MB (78 μmol/L) and phenol (265 μmol/L) was 91.1 %, 94.2 % and 45.6 %, respectively. The radical quenching experiment and TA test demonstrate that free radicals (⋅OH, SO4⋅−, ⋅O2−), nonradicals (1O2) and h+ existed in the TCN1‐4/PMS reaction system. TiO2/g‐C3N4 hybrids (TCNs) were constructed by an ammonium salt‐assisted hydrothermal‐high temperature calcination method and used to activate peroxymonosulfate (PMS) to degrade multiple simulated pollutants. The Z‐scheme heterojunction between TiO2 and g‐C3N4 can effectively promote the separation of electron‐hole pairs and improve the photocatalytic activation effect of TCN. The degradation efficiency of RhB in the TCN1/PMS system was 92.3 %, which was only 59.8 % and 63.2 % in g‐C3N4 /PMS the g‐C3 N4/PMS system and TiO2/PMS system, respectively, after 60 min of reaction under sunlight. The TCN1‐4 sample prepared by adding (NH4)2SO4 into the precursor of TCN1 has a higher specific surface area (116.44 m2/g), which provides a better photocatalytic activation effect on PMS: the degradation efficiency of RhB in the TCN1‐4/PMS system can reach 93.9 % after 30 min, which was similar to that of the TCN1/PMS system after 60 min (92.3 %), and the reaction efficiency was doubled. Radical quenching experiments showed that free radicals (⋅OH, SO4⋅−, ⋅O2−), nonradicals (1O2) and h+ existed in the TCN1‐4/PMS reaction system.

Z‐Scheme TiO2/g‐C3N4 Activation of Peroxymonosulfate to Remove Organic Pollutants: Properties and Mechanism

Enhanced performance and recyclability for peroxymonosulfate activation via controlling the different morphologies of g-C 3 N 4

Enhanced activation of peroxymonosulfate by CNT-TiO2 under UV-light assistance for efficient degradation of organic pollutants

Photothermal-catalytic activation periodate over MnO2/g-C3N4 S-scheme heterojunction for rapidly tetracycline removal: intermediates, toxicity evaluation and mechanism

Bifunctional activation of peroxymonosulfate over CuS/g-C 3 N 4 composite for efficient degradation of tetracycline antibiotics

Z-Type Heterojunction MnO2@g-C3N4 Photocatalyst-Activated Peroxymonosulfate for the Removal of Tetracycline Hydrochloride in Water

Oxygen-doped and pyridine-grafted g-C3N4 for visible-light driven peroxymonosulfate activation: Insights of enhanced tetracycline degradation mechanism

Highly Efficient Pollutants Removal over Mo/Mo2C/CoAl-LDH Heterostructure: Photo-Chemical Co-Driven Peroxymonosulfate Activation and Singlet Oxygen-Dominated Oxidative Decomposition

Heterogeneous activation of peroxymonosulfate by Cu+-decorated g-C3N4 under sunlight for degradation of organic pollutants

Important role of carbon doping in photocatalytic peroxymonosulfate activation of carbon nitride for efficient 4-Chlorophenol degradation

Peroxymonosulfate-enhanced photocatalysis by carbonyl-modified g-C3N4 for effective degradation of the tetracycline hydrochloride

S-scheme Heterojunction G-C3n4/ag/agnco for Efficient Tetracycline Removal in a Photo-Assisted Peroxymonosulfate System

Solar Light Assisted Peroxymonosulfate Activation by Metal-Free G-C3n4-Based S-Scheme Heterojunctions for Highly Efficient Tetracycline Removal: Performance, Mechanism, and Toxicity Assessment

Activation of Peroxymonosulfate by Co-Ni-Mo Sulfides/CNT for Organic Pollutant Degradation

Combination of N-doped porous carbon and g-C3N4 for effective removal of organic pollutants via activated peroxymonosulfate

Photo-assisted peroxymonosulfate activation via 2D/2D heterostructure of Ti3C2/g-C3N4 for degradation of diclofenac

Supramolecule self-assembly approach to direct Z-scheme TiO2/g-C3N4 heterojunctions for efficient photocatalytic degradation of emerging phenolic pollutants

Synthesis of TiO2/g-C3N4 Hybrid Photocatalyst and its Application for Degradation of Chlorophenol as Organic Water Pollutant

Influence of TiO2 conjunct with different g–C3N4 mass ratios on photocatalytic activity: visible and UV degradation of organic pollutant

Enhanced electron transfer-based nonradical activation of peroxymonosulfate by CoN x sites anchored on carbon nitride nanotubes for the removal of organic pollutants

Efficient light-free activation of peroxymonosulfate by carbon ring conjugated carbon nitride for elimination of organic pollutants