Abstract:TiO2/g‐C3N4 hybrids (TCNs) were constructed by an ammonium salt‐assisted hydrothermal‐high temperature calcination method and used to activate peroxymonosulfate (PMS) to degrade multiple simulated pollutants.The PL spectra, transient photocurrents and Nyquist pots of the impedance spectra indicate that TCN1‐4 has a better separation of electron‐hole pairs, which is due to the formation of Z‐scheme heterojunctions between TiO2 and g‐C3N4. In addition, (NH4)2SO4 as a bubble template could significantly increase the specific surface area of TCN1‐4. Based on the above two points, TCN1‐4 has excellent photocatalytic activation performance. A total of 93.8 % of RhB can be removed in 30 min in the TCN1‐4/PMS system, which is comparable to the 60 min removal in the TCN1/PMS system and much higher than that in the g‐C3N4/PMS and TiO2/PMS systems.The degradation of the TCN1‐4/PMS system can still be maintained at 94 % after 30 min under sunlight in the fifth cycle.TCN1‐4/PMS system also has an excellent degradation effect on MO, MB and phenol, under the same reaction conditions, the degradation of MO (76 μmol/L), MB (78 μmol/L) and phenol (265 μmol/L) was 91.1 %, 94.2 % and 45.6 %, respectively. The radical quenching experiment and TA test demonstrate that free radicals (⋅OH, SO4⋅−, ⋅O2−), nonradicals (1O2) and h+ existed in the TCN1‐4/PMS reaction system. TiO2/g‐C3N4 hybrids (TCNs) were constructed by an ammonium salt‐assisted hydrothermal‐high temperature calcination method and used to activate peroxymonosulfate (PMS) to degrade multiple simulated pollutants. The Z‐scheme heterojunction between TiO2 and g‐C3N4 can effectively promote the separation of electron‐hole pairs and improve the photocatalytic activation effect of TCN. The degradation efficiency of RhB in the TCN1/PMS system was 92.3 %, which was only 59.8 % and 63.2 % in g‐C3N4 /PMS the g‐C3 N4/PMS system and TiO2/PMS system, respectively, after 60 min of reaction under sunlight. The TCN1‐4 sample prepared by adding (NH4)2SO4 into the precursor of TCN1 has a higher specific surface area (116.44 m2/g), which provides a better photocatalytic activation effect on PMS: the degradation efficiency of RhB in the TCN1‐4/PMS system can reach 93.9 % after 30 min, which was similar to that of the TCN1/PMS system after 60 min (92.3 %), and the reaction efficiency was doubled. Radical quenching experiments showed that free radicals (⋅OH, SO4⋅−, ⋅O2−), nonradicals (1O2) and h+ existed in the TCN1‐4/PMS reaction system.

Photothermal-catalytic activation periodate over MnO2/g-C3N4 S-scheme heterojunction for rapidly tetracycline removal: intermediates, toxicity evaluation and mechanism

Z-Scheme Mechanism Study of Ternary BiPO4/reduced Graphene Oxide/protonated G-C3n4 Photocatalyst with Interfacial Electric Field Mediating for the Effective Photocatalytic Degradation of Tetracycline

Z-Type Heterojunction MnO2@g-C3N4 Photocatalyst-Activated Peroxymonosulfate for the Removal of Tetracycline Hydrochloride in Water

S-scheme Heterojunction G-C3n4/ag/agnco for Efficient Tetracycline Removal in a Photo-Assisted Peroxymonosulfate System

Construction of floating photothermal-assisted S-scheme heterojunction with enhanced photocatalytic degradation of tetracycline: Insights into mechanisms, degradation pathways and toxicity assessment

Solar Light Assisted Peroxymonosulfate Activation by Metal-Free G-C3n4-Based S-Scheme Heterojunctions for Highly Efficient Tetracycline Removal: Performance, Mechanism, and Toxicity Assessment

Z‐Scheme TiO2/g‐C3N4 Activation of Peroxymonosulfate to Remove Organic Pollutants: Properties and Mechanism

S-scheme photocatalyst Mo2C/α-Fe2O3 with vacant oxygen for highly efficient tetracycline degradation in peroxymonosulfate-mediated photocatalytic system

Joule-heating-assisted ultrafast fabrication of CoNi/CoNiO 2 heterojunction integrated with carbon nanotubes for efficient tetracycline destruction through peroxymonosulfate activation

Construction of S-scheme p-n heterojunction between protonated g-C3N4 and α-MnS nanosphere for photocatalytic H2O2 production and in situ degradation of oxytetracycline

Construction of Z-scheme g-C3N4 / MnO2 /GO ternary photocatalyst with enhanced photodegradation ability of tetracycline hydrochloride under visible light radiation

Promoting photocatalytic degradation of tetracycline over in-situ grown single manganese atoms on polymeric carbon nitride

Bifunctional activation of peroxymonosulfate over CuS/g-C 3 N 4 composite for efficient degradation of tetracycline antibiotics

S-scheme tubular g-C 3 N 4 /BiOI heterojunctions for boosting photodegradation of tetracycline and Cr(VI): mechanism insight, degradation pathway and DFT calculation

Enhanced tetracycline degradation by novel Mn-FeOOH/CNNS photocatalysts in a visible-light-driven photocatalysis coupled peroxydisulfate system

Visible Light Assisted Periodate Activation with Porous C3N5 for Tetracycline Degradation: Enhanced Electron-Hole Separation and Reactive Oxygen Species Formation

High efficiency degradation of tetracycline by peroxymonosulfate activated with Fe/NC catalysts: Performance, intermediates, stability and mechanism

Oxidative degradation of tetracycline hydrochloride by Mn2O3/Bi2O3 photocatalysis activated peroxymonosulfate

Promoting the performance of electrooxidation-PMS system for degradation of tetracycline by introduction of MnFe2O4/CNT as a third-electrode

Activation of Z-scheme heterojunction of peroxymonosulfate for augmented visible-light-induced photocatalytic decomposition of tetracycline and enhanced antimicrobial efficacy with O-doped g-C3N4@Co3O4

Construction of MOF@COF Z-scheme heterojunction for efficient photocatalytic degradation of tetracycline in water: Synthesis, mechanism, degradation pathway, and DFT calculation