Mining lithium from brines goes electric

Robert F. Service

DOI: https://doi.org/10.1126/science.adu8278

IF: 56.9

2024-11-30

Science

Abstract:Critical battery metal could be extracted more quickly than in evaporation ponds

multidisciplinary sciences

What problem does this paper attempt to address?

The brine of the times

Seth B Darling

DOI: https://doi.org/10.1126/science.ads3699

IF: 56.9

2024-09-27

Science

Abstract:New processes directly extract lithium from dilute sources.
Lithium extraction from brine through a decoupled and membrane-free electrochemical cell design

Zhen Li,I-Chun Chen,Li Cao,Xiaowei Liu,Kuo-Wei Huang,Zhiping Lai

DOI: https://doi.org/10.1126/science.adg8487

IF: 56.9

2024-09-27

Science

Abstract:The sustainability of lithium-based energy storage or conversion systems, e.g., lithium-ion batteries, can be enhanced by establishing methods of efficient lithium extraction from harsh brines. In this work, we describe a decoupled membrane-free electrochemical cell that cycles lithium ions between iron-phosphate electrodes and features cathode (brine) and anode (fresh water) compartments that are isolated from each other yet electrochemically connected through a pair of silver/silver-halide redox electrodes. This design is compatible with harsh brines having magnesium/lithium molar ratios of up to 3258 and lithium concentrations down to 0.15 millimolar, enabling the production of battery-grade (>99.95% pure) lithium carbonate. Energy savings of up to ~21.5% were realized by efficiently harvesting the osmotic energy of the brines. A pilot-scale cell with an electrode surface area of 33.75 square meters was used to realize lithium extraction from Dead Sea brine with a recovery rate of 84.0%.

multidisciplinary sciences
Recent Advances in Lithium Extraction Using Electrode Materials of Li-Ion Battery from Brine/Seawater

Jianpeng Sun,Dongdong Liang,Xiangchao Meng,Zizhen Li

DOI: https://doi.org/10.3390/pr10122654

IF: 3.5

2022-12-10

Processes

Abstract:With the rapid development of industry, the demand for lithium resources is increasing. Traditional methods such as precipitation usually take 1–2 years, and depend on weather conditions. In addition, electrochemical lithium recovery (ELR) as a green chemical method has attracted a great deal of attention. Herein, we summarize the systems of electrochemical lithium extraction and the electrode materials of the Li-ion battery from brine/seawater. Some representative work on electrochemical lithium extraction is then introduced. Finally, we prospect the future opportunities and challenges of electrochemical lithium extraction. In all, this review explores electrochemical lithium extraction from brine/seawater in depth, with special attention to the systems and electrode of electrochemical lithium extraction, which could provide a useful guidance for reasonable electrochemical-lithium-extraction.

engineering, chemical
Spontaneous lithium extraction and enrichment from brine with net energy output driven by counter-ion gradients

Ge Zhang,Yuqi Li,Xun Guan,Guoliang Hu,Hance Su,Xueer Xu,Guangxia Feng,Sanzeeda Baig Shuchi,Sang Cheol Kim,Jiawei Zhou,Rong Xu,Xin Xiao,Allen Wu,Yi Cui

DOI: https://doi.org/10.1038/s44221-024-00326-2

2024-10-25

Nature Water

Abstract:To meet the increasing lithium demands created by global electrification, a fast, flexible, inexpensive and sustainable mining process is needed, which is yet to be realized. Here we explore an untapped energy source that is inherent in all ion-separation processes to achieve spontaneous Li extraction with net energy production. The driving force comes from the huge concentration difference of counter ions (usually chloride) between the feeding and receiving solutions. Experimental results under various feeding compositions can be well explained by the Gibbs–Donnan equilibrium. Utilizing a Li-selective ceramic membrane and a chloride-storing silver electrode, we successfully achieved Li extraction from simulated brine with an energy output of 1.6 Wh mol Li −1 . The system is stable over 300 hours of operation, maintaining a high Li/Mg selectivity of 450. Moreover, even spontaneous enrichment can be achieved when the counter ion concentration is much greater than that of Li ion in the feeding brine. We anticipate that the concept of this work could not only reshape the Li supply chain but also seed a fundamental transformation of all ion-separation processes.
(Invited) Electroflow: Sustainable Electrochemical Lithium Chemical Production

Eric J. McShane,Evan J. Gardner

DOI: https://doi.org/10.1149/ma2024-01281483mtgabs

2024-08-09

ECS Meeting Abstracts

Abstract:The demand for lithium has soared in recent years as the adoption of electric vehicles has grown rapidly, and lithium supply will need to grow another ~5x from current day to meet projected demand for lithium in 2030. To keep pace with this exponentially growing demand, novel methods of lithium sourcing are needed. Direct lithium extraction (DLE) from saltwater brines holds promise to unlock the lithium resources needed to power the electric vehicle revolution. Lithium is traditionally sourced via two methods. Open pit hard rock mining is the method which many are familiar with. In this method, rocks are excavated, roasted with sulfuric acid, and the eluent is processed to produce a pure lithium product. This is well known to be environmentally destructive, and it produces larges amounts of waste products. The second method employed to produce lithium chemicals is brine evaporation ponds. In this method, brine is pumped to a surface pond, often multiple acres across, and solar evaporation concentrates the lithium in the brine to the point that it can undergo further processing. This method is extremely land and water intensive, and local residents adjacent to such ponds are increasingly worried about the effects of such methods on local water tables. Electroflow employs a DLE process to convert brine directly into pure, battery grade lithium chemicals via a sustainable electrochemical process. Our electrochemical cell design enables extraction from dilute lithium brine resources with as low as 10 ppm Li, which unlocks huge swaths of new lithium resources across the globe, and specifically in North America. We use lithium-selective electrode materials as the basis for lithium separation from brine solutions, and this allows a new paradigm of DLE processes that have not yet been thoroughly studied. This talk will describe the operation of our technology and explore the impact that it could have at scale.
Direct extraction of lithium from ores by electrochemical leaching

Hanrui Zhang,Ying Han,Jianwei Lai,Joseph Wolf,Zhen Lei,Yang Yang,Feifei Shi

DOI: https://doi.org/10.1038/s41467-024-48867-0

2024-06-13

Abstract:With the rapid increase in lithium consumption for electric vehicle applications, its price soared during the past decade. To secure a reliable and cost-effective supply chain, it is critical to unlock alternative lithium extraction resources beyond conventional brine. In this study, we develop an electrochemical method to directly leach lithium from α-phase spodumene. We find the H2O2 promoter can significantly reduce the leaching potential by facilitating the electron transfer and changing the reaction path. Upon leaching, β-phase spodumene shows a typical phase transformation to HAlSi2O6, while leached α-phase remains its original crystal phase with a lattice shrinkage. To demonstrate the scale-up potential of electrochemical leaching, we design a catalyst-modified high-throughput current collector for high loading of suspended spodumene, achieving a leaching current of 18 mA and a leaching efficiency of 92.2%. Electrochemical leaching will revolutionize traditional leaching and recycling processes by minimizing the environmental footprint and energy consumption.
Recent progress on key materials and technical approaches for electrochemical lithium extraction processes

Xiaoyu Zhao,Shuo Yang,Yongdan Hou,Haoqiang Gao,Yanfei Wang,Daniel A. Gribble,Vilas G. Pol

DOI: https://doi.org/10.1016/j.desal.2022.116189

IF: 11.211

2023-01-15

Desalination

Abstract:The supply and demand of lithium resources are seriously unbalanced due to the rapid growth of energy storage technologies designed to meet proposed carbon emission reduction targets. Lithium resources in the form of liquid solutions, such as seawater, salt-lake brine, and underground brine contribute greatly to this development due to their low cost and relatively abundant reserves. Electrochemical methods are particularly promising to extract lithium from solutions due to their excellent selectivity, environmental friendliness, and low energy consumption. From the perspective of fundamental research on new technologies, it is critical to maximize lithium extraction ability as well as potential applications. In this paper, operation modes of electrochemical lithium extraction processes as well as significant developments of key electrode materials are reviewed. Trends in routes for development are analyzed, and future research directions are correspondingly identified.

engineering, chemical,water resources
Electro-driven Direct Lithium Extraction from Geothermal Brines to Generate Battery-Grade Lithium Hydroxide

Xitong Liu,Lingchen Kong,Gangbin Yan,Kejia Hu,Yongchang Yu,Naby Conte,Kevin McKenzie,Michael J. Wagner,Stephen G. Boyes,Hanning Chen,Chong Liu

DOI: https://doi.org/10.21203/rs.3.rs-3467164/v1

2023-01-01

Abstract:As Li-ion batteries are increasingly being deployed in electric vehicles and grid-level energy storage, the demand for Li is growing rapidly. Extracting lithium from unconventional aqueous sources such as geothermal brines plays an important role in meeting this demand. Electrochemical intercalation offers high Li selectivity and avoids the use of harsh chemical regenerants, thus holding great promise in directly extracting lithium from unconventional sources. In this work, we design an integrated electrochemical process that achieves selective lithium extraction from geothermal brine, purification of lithium chloride, and conversion to lithium hydroxide. The lithium extraction process utilizes a lithium-intercalation electrode, LiFePO 4 (LFP), as the working electrode coupled with an activated carbon electrode as the counter electrode. A 91% purity LiCl is extracted from simulated Salton Sea geothermal brine containing 42 mM Li + , 3.1 M Na + (Li/Na molar ratio 1:74), 1070 mM Ca 2+ , and 540 mM K + , and a further purification step achieves a pure LiCl solution with no Na detected. Subsequently, lithium hydroxide is further produced through a bipolar membrane electrodialysis system and finally crystallized to obtain battery grade (> 99.5% purity) LiOH•H 2 O solid. We investigated the selectivity of lithium separation in solutions with different cation concentration ratios as well as in synthetic geothermal brines. We further conducted density-functional theory (DFT) calculations to elucidate the mechanisms underlying the high Li selectivity of olivine FePO 4 in aqueous solution. Finally, we conducted techno-economic assessments using a parametric model and estimated the levelized cost of produced LiOH•H 2 O (LCOL) as 4.1 $/kg LiOH•H 2 O, which is 6 times lower than the current market price. The results demonstrate the great potential of our technology for electro-driven, chemical-free lithium extraction from unconventional sources.
Extracting Lithium from Low Concentration Solutions for Direct Battery Cathode Production

Jiangtao Hu,Yuan Jiang,Linze Li,Zhaoxin Yu,Chongmin Wang,Gary Gill,Jie Xiao,Robert J. Cavagnaro,Li-jung Kuo,R. Matthew Asmussen,Dongping Lu

DOI: https://doi.org/10.2139/ssrn.3917206

2021-01-01

SSRN Electronic Journal

Abstract:Lithium (Li) is one of the critical industrial materials and an indispensable component in manufacturing Li-ion/Li batteries. However, Li resource is very limited and geographically uneven in earth’s crust and its mining is not sustainable due to the low efficiency and complicated separation and refining processes. Hence, direct Li recovery (from brines, seawater or used cells) and utilization are desired. Here, we report a novel technology to recover Li from low concentration solutions into a form of Li resource, which can be directly used for commercial battery materials production by fully eliminating the costly Li separation steps. By using both Li-ion selective membrane and low-cost Li host structural material, highly selective Li extraction was realized. Li-ion cathodes (e.g., spinel LiMn2O 4 and layered LiNix MnyCozO2) were synthesized with the extracted Li and have high phase purities and economic superiorities (e.g., $12.8 kg-1 for LiMn2O4) over other Li extraction methods and even commercial cathodes ($15 kg-1 for LiMn2O4). This contribution provides a potential technical pathway to overcome the challenges of both Li supply and battery cost for future electrification and decarbonization of socioeconomic system.
Selective Lithium Extraction from Brine via Chemical Reduction of Iron Phosphate with Aqueous Iron Compounds

Jing Wang,Alex Hawkins,Amin Tia Saasi,Caroline Morin,Geoffrey M Geise,Gary Koenig

DOI: https://doi.org/10.1039/d4se00703d

IF: 6.813

2024-07-19

Sustainable Energy & Fuels

Abstract:Worldwide demand for lithium (Li) is surging due to increased production of Li-ion batteries to meet the needs for increasing numbers of electric vehicles and stationary energy storage systems. Conventional Li+ extraction from Li-bearing ores and brines has drawbacks of high chemical and energy inputs. In this work, chemical redox-driven processes were developed to selectively extract Li+ from brine meant to simulate a geothermal resource. Using additives that modify the redox potential of soluble iron compounds, ethylenediaminetetraacetic acid (EDTA) and citrate, the potential of the solution was shifted lower to drive reduction of a targeted solid electroactive material (FePO4, FP). Li+ from simulated brine sources (with molar ratio Li+:Na+ of 1:78) was extracted into the FP solid without additional energy inputs. The Li+ adsorption capacity for extraction with EDTA-Fe2+ solutions and Citrate-Fe2+ solutions were 3.8 mmol Li+ g-1 FP and 2.5 mmol Li+ g-1 FP, respectively, and the selectivity factors for Li+ to Na+ for the two systems were 78 and 350, respectively. Similar extraction outcomes were achieved using a brine that more closely resembled the composition of geothermal fluids from the Salton Sea. This study more broadly provided insight into enhancing Li+ capture selectivity through modification of redox solution compositions.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Environmental impact of direct lithium extraction from brines

María L. Vera,Walter R. Torres,Claudia I. Galli,Alexandre Chagnes,Victoria Flexer

DOI: https://doi.org/10.1038/s43017-022-00387-5

IF: 37.214

2023-02-24

Nature Reviews Earth & Environment

Abstract:Evaporitic technology for lithium mining from brines has been questioned for its intensive water use, protracted duration and exclusive application to continental brines. In this Review, we analyse the environmental impacts of evaporitic and alternative technologies, collectively known as direct lithium extraction (DLE), for lithium mining, focusing on requirements for fresh water, chemicals, energy consumption and waste generation, including spent brines. DLE technologies aim to tackle the environmental and techno–economic shortcomings of current practice by avoiding brine evaporation. A selection of DLE technologies has achieved Li + recovery above 95%, Li + /Mg 2+ separation above 100, and zero chemical approaches. Conversely, only 30% of DLE test experiments were performed on real brines, and thus the effect of multivalent ions or large Na + /Li + concentration differences on performance indicators is often not evaluated. Some DLE technologies involve brine pH changes or brine heating up to 80 o C for improved Li + recovery, which require energy, fresh water and chemicals that must be considered during environmental impact assessments. Future research should focus on performing tests on real brines and achieving competitiveness in several performance indicators simultaneously. The environmental impact of DLE should be assessed from brine pumping to the production of the pure solid lithium product.
Lithium Extraction with Energy Generation

Wenguang Wang,Lu Shao

DOI: https://doi.org/10.1038/s44221-024-00330-6

2024-01-01

Nature Water

Abstract:Traditional techniques for lithium extraction require considerable energy consumption. A spontaneous process with net energy output driven by counterion gradients presents a promising solution for energetically efficient lithium extraction and enrichment from brine.
A Lithium Feedstock Pathway: Coupled Electrochemical Extraction and Direct Battery Materials Manufacturing

Jiangtao Hu,Yuan Jiang,Linze Li,Zhaoxin Yu,Chongmin Wang,Gary Gill,Jie Xiao,Robert J. Cavagnaro,Li-Jung Kuo,R. Matthew Asmussen,Dongping Lu

DOI: https://doi.org/10.1021/acsenergylett.2c01216

2023-01-01

Abstract:Lithium is a critical industrial material and an indispensable component in manufacturing Li batteries. However, Li resources are limited and geographically uneven in the Earth's crust, and its mining is not sustainable due to the low efficiency and complicated separation and refining processes. Here, we report a one-step technology to electrochemically extract Li from low-concentration solutions (brines, seawater, or used Li-ion batteries) into a form to directly produce commercial battery materials, eliminating the costly Li separation/purification steps. By using this approach, Li was selectively extracted and converted into battery cathodes (e.g., spinel LiMn2O4 and layered LiNixMnyCozO2) through heat treatment. Techno-economic analysis indicates that the prepared cathode materials have economic superiorities over even commercial cathodes. With the importance of Li-ion batteries to the overall decarbonization strategy, the demonstration of a one-step Li extraction to a ready-to-use material could expand the access to Li resources at a lower cost by eliminating processing steps.
Continuous lithium extraction from brine by efficient redox-couple electrodialysis

Rong Xu,Xin Xiao,Ge Zhang,Yusheng Ye,Pu Zhang,Yufei Yang,Sanzeeda Baig Shuchi,Yi Cui

DOI: https://doi.org/10.1016/j.matt.2024.07.014

IF: 18.9

2024-08-25

Matter

Abstract:Can we replace the inefficient, costly, and environmentally harmful traditional methods of Li mining with a sustainable and economical process? The authors present an efficient redox-couple electrodialysis (RCE) method for sustainable Li extraction from salt-lake brines. The benefits to efficiency and cost innate to their RCE approach make it a promising alternative to current extraction techniques and a potential game changer for the Li supply chain.

materials science, multidisciplinary
Solar transpiration–powered lithium extraction and storage

Yan Song,Shiqi Fang,Ning Xu,Monong Wang,Shuying Chen,Jun Chen,Baoxia Mi,Jia Zhu

DOI: https://doi.org/10.1126/science.adm7034

IF: 56.9

2024-09-27

Science

Abstract:Lithium mining is energy intensive and environmentally costly. This is because lithium ions are typically present in brines as a minor component mixed with physiochemically similar cations that are difficult to separate. Inspired by nature's ability to selectively extract species in transpiration, we report a solar transpiration–powered lithium extraction and storage (STLES) device that can extract and store lithium from brines using natural sunlight. Specifically, the device uses a hierarchically structured solar transpirational evaporator to create a pressure gradient, which allows for the extraction of lithium from brines through a membrane and its storage in a vascular storage layer. Long-term experiments, various membrane tests, and different size assessments demonstrate the stability, compatibility, and scalability of STLES. This solar-powered mining technology provides an alternative developing pathway toward the sustainable extraction of critical resources.

multidisciplinary sciences
Technology for the Recovery of Lithium from Geothermal Brines

William T. Stringfellow,Patrick F. Dobson

DOI: https://doi.org/10.3390/en14206805

IF: 3.2

2021-10-18

Energies

Abstract:Lithium is the principal component of high-energy-density batteries and is a critical material necessary for the economy and security of the United States. Brines from geothermal power production have been identified as a potential domestic source of lithium; however, lithium-rich geothermal brines are characterized by complex chemistry, high salinity, and high temperatures, which pose unique challenges for economic lithium extraction. The purpose of this paper is to examine and analyze direct lithium extraction technology in the context of developing sustainable lithium production from geothermal brines. In this paper, we are focused on the challenges of applying direct lithium extraction technology to geothermal brines; however, applications to other brines (such as coproduced brines from oil wells) are considered. The most technologically advanced approach for direct lithium extraction from geothermal brines is adsorption of lithium using inorganic sorbents. Other separation processes include extraction using solvents, sorption on organic resin and polymer materials, chemical precipitation, and membrane-dependent processes. The Salton Sea geothermal field in California has been identified as the most significant lithium brine resource in the US and past and present efforts to extract lithium and other minerals from Salton Sea brines were evaluated. Extraction of lithium with inorganic molecular sieve ion-exchange sorbents appears to offer the most immediate pathway for the development of economic lithium extraction and recovery from Salton Sea brines. Other promising technologies are still in early development, but may one day offer a second generation of methods for direct, selective lithium extraction. Initial studies have demonstrated that lithium extraction and recovery from geothermal brines are technically feasible, but challenges still remain in developing an economically and environmentally sustainable process at scale.

energy & fuels
Lithium extraction from water lithium resources through green electrochemical-battery approaches: A comprehensive review

Ye Zhang,Wei Sun,Rui Xu,Li Wang,Honghu Tang

DOI: https://doi.org/10.1016/j.jclepro.2020.124905

IF: 11.1

2021-02-01

Journal of Cleaner Production

Abstract:The growing market demands for large-scale applications of lithium such as lithium-ion batteries increase the significance of its production. Land lithium resources are drastically decreasing; thus, lithium extraction from water lithium resources involving salt-lake brine and seawater has a growing tendency owing to its merits of low cost and abundant reserves. Lithium extraction from water lithium resources, especially those with high Mg/Li ratios, is challenging. Among all kinds of aqueous lithium-extraction methods, the electrochemical-battery approach is considered the most promising one as a result of its excellent lithium selectivity, high insertion capacity, low energy consumption, high reversibility, and ecofriendliness. The present work reviews the advantages and challenges of current electrochemical-battery systems involving lithium manganese oxide and lithium iron phosphate systems. The effects of several parameters and relevant mechanisms are discussed, including applied voltage, ionic concentration, pH, time, and coexisting ions. We stress that a combination of the electrochemicallithium-recovery process with a desalination process enables the highly efficient and economical extraction of lithium from low-concentration solutions. Currently available electrochemical batteries still suffer from problems of low stability and high cost of raw materials. Future research should focus on the enhancement in the battery-system stability, process optimization, and reduction of operating costs.

environmental sciences,green & sustainable science & technology,engineering, environmental
Electrochemically Mediated Lithium Extraction for Energy and Environmental Sustainability

Yiwen Zeng,Wanpeng Li,Zhixin Wan,Shaoyi Qin,Qinlin Huang,Wenlong Cai,Qian Wang,Meng Yao,Yun Zhang

DOI: https://doi.org/10.1002/adfm.202400416

IF: 19

2024-03-03

Advanced Functional Materials

Abstract:This review presents the global lithium supply, demand, and distribution, and explains the importance of saline lithium extraction. It compares several common methods for salt lake lithium extraction. The demand for lithium resources is growing rapidly due to the continuous development of the lithium‐ion battery, which plays an important part in the renewable energy industry. Global sources of lithium are ores and brine, of which 59% are distributed in saline brine. However, the significant lithium resources in saline brine have not been fully utilized. The electrochemical deintercalation method (EDM) for lithium extraction from saline brine is a promising technique because of its environmental friendliness, high selectivity, and cost‐effectiveness. Nevertheless, the application of EDM is greatly limited by the easy dissolution of electrode materials like LiMn2O4 and the cost of mass production. Also, there are a few existing review articles on the EDM for lithium extraction. To address this gap, this review provides a comprehensive overview of the current methods for lithium extraction from saline brine, systematically summarizes the technical status of the EDM, and pays special attention to the preparation method and modification of electrode materials. This review gives new insight into the mechanism of EDM and provides a new design strategy for the evaluation methods of EDM.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Lithium Metal Recovery from Sea Water by a Flexible and Scalable Membrane with Lithium-Ion Exclusive Channels

Jingui Yang,Yigang Wang,Menghang Zhang,Pengfei Wang,Xuewei He,Haoshen Zhou,Ping He

DOI: https://doi.org/10.1002/anie.202411957

2024-09-03

Abstract:Sea water is abundant in lithium reserves, and extracting lithium metal from it holds the potential to not only mitigate the shortage of lithium in light of the fast-growing electric vehicle industry, but also serve as an anode electrode to provide electricity. The task, however, is challenging due to the harsh reactions and low lithium concentration in sea water. Here, we present a single-channel strategy based on a flexible and scalable lithium ion-sieve membrane for efficient lithium extraction. Our composite membrane exhibits high separation factor βLi/Na of more than 2.87 × 107 with an ionic conductivity of 6.2×10-5 S cm-1. Lithium metal was electrolytically extracted from sea water through a hybrid-electrolyte system, which yielded a high Coulombic efficiency of 98.04% and a low energy consumption of 17.4 kWh kgLi-1 at an optimized extracting current of 200 μA cm-2. The extracted lithium metal can be directly integrated into a lithium-sulfur battery, delivering an energy output of 395 Wh kg-1. To demonstrate its industrial viability, we also fabricate a pouch cell with Li metal anode extracted by an amplified extraction prototype. This study has the potential to dispel concerns of lithium depletion and facilitate the sustainable development of lithium-based energy storage systems.
Novel approaches for lithium extraction from salt-lake brines: A review

Gui Liu,Zhongwei Zhao,Ahmad Ghahreman

DOI: https://doi.org/10.1016/j.hydromet.2019.05.005

IF: 4.217

2019-08-01

Hydrometallurgy

Abstract:Due to the abundant reserves and increasing demand, the extraction and separation of lithium from salt-lake brines have attracted great interest worldwide. This review aims to summarize the major developments in lithium recovery from brines, starting from an overview of lithium demand and consumption, available resources and processing methods, and challenges of processing brines, followed with the advancements in solvent extraction, ion-sieve adsorption, electrochemical approaches, and membrane technology, successively. The paper focuses on the principles, mechanisms, operations, and comparison of the various approaches. Other promising techniques, such as the modification of ion-sieves, rocking-chair batteries, and liquid-membrane electrodialysis, also are discussed in the depth of mechanisms. These processes present excellent performance in the separation of Li+/Mg2+ or Li+/Na+. Finally, insights into the directions and prospects of lithium extraction from brines are presented. It can be concluded that only by integrating the advantages of various recent technologies will it be possible to develop an efficient, low cost, environmentally sustainable, and scalable process for lithium extraction from brines.

metallurgy & metallurgical engineering

Mining lithium from brines goes electric

The brine of the times

Lithium extraction from brine through a decoupled and membrane-free electrochemical cell design

Recent Advances in Lithium Extraction Using Electrode Materials of Li-Ion Battery from Brine/Seawater

Spontaneous lithium extraction and enrichment from brine with net energy output driven by counter-ion gradients

(Invited) Electroflow: Sustainable Electrochemical Lithium Chemical Production

Direct extraction of lithium from ores by electrochemical leaching

Recent progress on key materials and technical approaches for electrochemical lithium extraction processes

Electro-driven Direct Lithium Extraction from Geothermal Brines to Generate Battery-Grade Lithium Hydroxide

Extracting Lithium from Low Concentration Solutions for Direct Battery Cathode Production

Selective Lithium Extraction from Brine via Chemical Reduction of Iron Phosphate with Aqueous Iron Compounds

Environmental impact of direct lithium extraction from brines

Lithium Extraction with Energy Generation

A Lithium Feedstock Pathway: Coupled Electrochemical Extraction and Direct Battery Materials Manufacturing

Continuous lithium extraction from brine by efficient redox-couple electrodialysis

Solar transpiration–powered lithium extraction and storage

Technology for the Recovery of Lithium from Geothermal Brines

Lithium extraction from water lithium resources through green electrochemical-battery approaches: A comprehensive review

Electrochemically Mediated Lithium Extraction for Energy and Environmental Sustainability

Lithium Metal Recovery from Sea Water by a Flexible and Scalable Membrane with Lithium-Ion Exclusive Channels

Novel approaches for lithium extraction from salt-lake brines: A review