Abstract:China is a country that suffers a lot from the earthquake disaster. The major reason for the human death and property losses in earthquake is the collapse of the tall buildings. Hence, correct simulation for the failure modes and accurate prediction for the collapse of the tall buildings under earthquake disaster is very useful for studying the safety of buildings and evaluating losses during earthquakes[1]. However, a lot of simplifications must be carried out in the existing simulations to overcome the numerical problems because the grave nonlinearity exists when collapse happens. This may lead to the results away from a real phenomenon. In this study, a fiber model for reinforced concrete (RC) structures (referred as THUFIBER) is developed, which is based on the general-purpose finite element package of MSC.MARC that carries significant capacity of solving nonlinear problems. In this model, the concrete and the reinforcement inside the structural elements are modeled respectively with different fibers as shown in figure 1 so that the cyclic behavior of material can be properly simulated. Pushover and dynamic time-history analysis for a RC frame tall building are carried out to illustrate the capacity of the proposed model. And dynamic time-history analysis is emphasized in this paper to discuss the collapse modes of the structure. The results show that THUFIBER can simulate the collapse and failure process of the structure under the dynamic loads such as complicated seismic loads, including the softening and fracture behaviors of structural elements, and further the program shows good convergence in the non-linear cases. So THUFIBER has a strong and promising ability for nonlinear analysis including collapse numerical simulation. Figure 1 Section dicretization of the fiber model Figure 2 Simulation for the Collapse of the frame

Numerical simulation and analysis of different collapse patterns for RC frame structure

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

NUMERICAL SIMULATION OF FAILURE BEHAVIOR OF REINFORCED CONCRETE FRAME STRUCTURES BY DISCRETE ELEMENT METHOD

Collapse tests of RC frame with sudden middle column removal

Experimental Study on Progressive Collapse-Resistant Behavior of Reinforced Concrete Frame Structures

Experimental research on a large scale RC frame model subjected to sudden corner column removal

Numerical Simulation for the Progressive Collapse of Concrete Building due to Earthquake

Numerical analysis for collapse reponse of a RC frame subjected to impact loading based on multi-scale model

Collapse Simulation of RC High-Rise Building Induced by Extreme Earthquakes

Experimental Study and Numerical Model Calibration for Earthquake-Induced Collapse of Rc Frames with Emphasis on Key Columns, Joints, and the Overall Structure

Collapse simulation of reinforced concrete high-rise building induced by extreme earthquakes

Numerical Models to Predict the Collapse Behavior of RC Columns and Frames

Pseudo-static collapse experiments and numerical prediction competition of RC frame structure Ⅱ:key elements experiment

Lessons from the Collapse of Typical RC Frames in Xuankou School During the Great Wenchuan Earthquake

Numerical Simulation of Catenary Effect of (RC) Frame Structure Based on MSC.Marc

The Finite Element Analysis of Six-layer frame structure Suffered vertical collapsed

Simulation for the Collapse of RC Frame Tall Buildings under Earthquake Disaster

Application of Fiber Model for Progressive Collapse Analysis of Reinforced Concrete Frames *

A Simplified Method for Quantifying the Progressive Collapse Fragility of Multi-Story RC Frames in China

Experimental and modeling study on the progressive collapse resistance of a reinforced concrete frame structure under a middle column removal scenario

A novel structural detailing for the improvement of seismic and progressive collapse performances of RC frames