Abstract:The effects of the ultrasonic surface rolling process (USRP), plasma electrolytic oxidation (PEO), and their combined treatment (USRP+PEO) on the hot salt corrosion fatigue (HSCF) behavior of TC11 alloy are comparatively studied. The mechanism of improving the HSCF performance of TC11 alloy through the above surface strengthening techniques is revealed by analyzing the surface integrity and microstructure of the modified layer. The results show that the TC11 alloy exhibits high HSCF sensitivity, and fatigue limit reduces by 27.78% under the condition of 0.1 mg/cm 2 solid NaCl deposition at 500 °C compared to the sample without salt deposition. The mechanism of HSCF is that corrosion pits promote the initiation of fatigue cracks by causing local stress concentration on the sample's surface. Meanwhile, hydrogen and hydride generated by hot salt corrosion also promote fatigue crack propagation. Compared with the base material (BM) sample under the condition of 0.1 mg/cm 2 NaCl deposition, the HSCF limit increases by 10.26% by USRP treatment. This is due to the combination of an increase in dislocation density, a decrease of β-phase content, and the introduction of compressive residual stress (CRS), improving the high-temperature fatigue resistance, corrosion resistance, and hydrogen damage resistance of TC11 alloy. PEO treatment increases HSCF resistance of TC11 alloy, and the HSCF limit increases by 47.44% compared with the BM sample. This is mainly because the dense barrier layer (DBL) could effectively inhibit erosion by the chloride medium and inhibit hydrogen damage, which significantly improve the crack initiation resistance. The HSCF limit of the TC11 alloy further increases by 64.10% by the USRP+PEO treatment, and the effect of improving the HSCF resistance is better than that of USRP or PEO treatment alone. This is attributed to the fact that USRP pretreatment increases the alloy's erosion resistance to a corrosive medium by increasing the thickness of the DBL. Meanwhile, the synergistic effect of stable CRS and gradient nanostructure introduced by USRP significantly increases the crack initiation and propagation resistance of HSCF for TC11 alloys.

Hot salt corrosion behavior of Ti–6Al–4V alloy treated with different surface deformation strengthening processes

Effect of the ultrasonic surface rolling process and plasma electrolytic oxidation on the hot salt corrosion fatigue behavior of TC11 alloy

Effect of Repeated Processing Passes during Ultrasonic Rolling on Fatigue Performance and Corrosion Resistance of Ti6Al4V Alloy

Effects of Ultrasonic Surface Rolling on the Localized Corrosion Behavior of 7B50-T7751 Aluminum Alloy

Effect of Ultrasonic Shot Peening on the Microstructure, Surface Residual Stress, and Wear Properties of Ti-6al-4v Alloy

On the influence of ultrasonic surface rolling process on surface integrity and fatigue performance of Ti-6Al-4V alloy

The mechanisms of hot salt stress corrosion cracking in titanium alloy Ti-6Al-2Sn-4Zr-6Mo

Influence of Ultrasonic Surface Rolling Process and Shot Peening on Fretting Fatigue Performance of Ti-6Al-4V

Effect of annealing on the hot salt corrosion resistance of the fine-grained titanium alpha-alloy Ti-2.5Al-2.6Zr obtained via cold Rotary Swaging

Effect of ultrasonic surface rolling on surface layer properties and fretting wear properties of titanium alloy Ti5Al4Mo6V2Nb1Fe

Salt spray corrosion behavior and pitting resistance of Ti-15 V-3Cr-3Al-3Sn alloy evaluated using XPS, SKPFM, and electrochemical technique

Ultrasonic Rolling Strengthening of TC11 Titanium Alloy Surface: Corrosion and Wear Properties under Extreme Conditions

Effect of Ultrasonic Surface Rolling on Fretting Friction and Wear Properties of Heat-Treated Hot Isostatic Pressing Ti-6Al-4V Alloy

Effects of high temperature pre-precipitation on mechanical and corrosion behavior of an Al-Zn-Mg-Cu alloy

Research on surface integrity of Ti-6Al-4V alloy with compound treatment of laser shock peening and shot peening

The effect of heat treatment on corrosion behavior of selective laser melted Ti-5Al-5Mo-5V-3Cr-1Zr alloy

Evolution of surface mechanical properties and microstructure of Ti-6Al-4V alloy induced by electropulsing-assisted ultrasonic surface rolling process

Oxidative Corrosion Mechanism of Ti2AlNb-Based Alloys during Alternate High Temperature-Salt Spray Exposure

Investigations on surface modification of nickel-based superalloy subjected to ultrasonic surface rolling process

Microstructure Evolution, Hardness, and Tribological Behaviors of Ti-50.8Ni SMA Alloy with Ultrasonic Surface Shot Peening Treatment

Effect of ultrasonic shot peening surface alloying on recrystallisation of a single crystal superalloy