Abstract:Lithium-metal batteries (LMBs) are promising electrochemical energy storage devices with high energy densities. However, the extreme reactivity of metallic lithium, the large volumetric change of the electrode during cycling, and the notorious dendrite formation issues lead to low cyclic stability and safety concerns, hindering the practical application of LMBs. In particular, the intrinsic tendency of uneven lithium deposition and the large internal electrode stress lead to the piecing of solid electrolyte interphases (SEIs), thereby resulting in fast decay of the anode. We develop a facile laser processing technique to fabricate laser-structured copper foils (LSCFs) that are able to regulate the lithium deposition kinetics and increase the cycle life of LMBs. By simply scribing commercial foils using a 355 nm laser, microstructural features with fish-scale patterns are obtained. The lithium deposition follows a drastically different mode on the LSCF compared with commercial planar copper foils which relieves the internal stress of lithium and prohibits the piecing of SEI. A high Coulombic efficiency of >96% of the lithium metal anode is maintained for over 100 cycles on the LSCF at a current density of 1 mA cm–2 and an areal capacity of 1 mAh cm–2 while the benchmark decayed to below 80% after 50 cycles. Full cells based on LiFePO4 cathodes display a reasonable specific capacity of 125 mAh g–1 over 300 cycles at a rate of 1 C. This work provides a fast yet effective laser-based approach to construct highly stable lithium metal anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21301?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21301</a>.Setup of the laser equipment; EIS and CE of the Li||Cu cell; Li|| long cycle overpotential; AFM characterizations of bare Cu and LSCF (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21301/suppl_file/am0c21301_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Overcoming Copper Substrate Thermodynamic Limitations in Anode-Free Lithium Pouch Cells via In Situ Seed Implantation

Growing Cuprite Nanoparticles on Copper Current Collector Toward Uniform Li Deposition for Anode-Free Lithium Batteries

Super-three-dimensional Lithiophilic Cu-based Current Collector for Anode-free Lithium Metal Battery

A High-Current Initiated Formation Strategy for Improved Cycling Stability of Anode-Free Lithium Metal Batteries

In-situ construction of high-performance artificial solid electrolyte interface layer on anode surfaces for anode-free lithium metal batteries

Mitigating dendrite formation and electrolyte decomposition via functional double layers coating on copper current collector in anode-free lithium metal battery

Anode‐Free Li Metal Batteries: Feasibility Analysis and Practical Strategy

Ultrafast Growth of Sulfurized 3d Composite Host for High−Energy Dendrite−Free Lithium Metal Batteries

Nitrogen Ion Implantation-Modified Cu Substrate for Stable Lithium Metal Anode

Sowing Silver Seeds within Patterned Ditches for Dendrite‐Free Lithium Metal Batteries

Toward High‐Energy‐Density Initial‐Anode‐Free Lithium‐Metal Batteries via Ultra‐Thin Protective Ion‐Transport‐Promoting Interface Modification and Surface Prelithiation

Lithiophilic Cu‐Li 2 O matrix on a Cu Collector to Stabilize Lithium Deposition for Lithium Metal Batteries

Phosphorized 3D Current Collector for High-Energy Anode-Free Lithium Metal Batteries

Large‐Scale Modification of Commercial Copper Foil with Lithiophilic Metal Layer for Li Metal Battery

Revealing the Intrinsic Uneven Electrochemical Reactions of Li Metal Anode in Ah-Level Laminated Pouch Cells

Modulating Lithium Nucleation Behavior Through Ultrathin Interfacial Layer for Superior Lithium Metal Batteries

Regulating Li Nucleation and Growth Heterogeneities via Near‐Surface Lithium‐Ion Irrigation for Stable Anode‐Less Lithium Metal Batteries

Fast and Simple Ag/Cu Ion Exchange on Cu Foil for Anode-Free Lithium-Metal Batteries

Regulating Lithium Electrodeposition with Laser-Structured Current Collectors for Stable Lithium Metal Batteries

One-stone, two birds: One step regeneration of discarded copper foil in zinc battery for dendrite-free lithium deposition current collector

Constructing Sn-Cu2O Lithiophilicity Nanowires As Stable and High-Performance Lithium Metal Anodes