Abstract:An industrially promising physical modification method based on ion beam technology is advocated to construct the lithiophilic ZnMgTiAl alloy films on Cu current collectors, which reduce the nucleation barrier of lithium, optimize the interfacial chemical reaction, suppress Li dendrite, and improve the electrochemical behavior of LMBs by regulating the lithium deposition morphology and SEI components. Surface modification of Cu current collectors (CCs) is proven to be an effective method for protecting lithium metal anodes. However, few studies have focused on the quality and efficiency of modification layers. Herein, a novel home‐made filtered cathode vacuum arc (FCVA) co‐deposition system with high modification efficiency, good repeatability and environmental friendliness is proposed to realize the wide range regulation of film composition, structure and performance. Through this system, ZnMgTiAl quaternary alloy films, which have good affinity with Li are successfully constructed on Cu CCs, and the fully enhanced electrochemical performances are achieved. Symmetrical cells constructed with modified CCs maintained a fairly low voltage hysteresis of only 13 mV after 2100 h at a current density of 1 mA cm−2. In addition, the capacity retention rate is as high as 75.0% after 100 cycles in the full cells. The influence of alloy films on the dynamic evolution process of constructing stable artificial solid electrolyte interphase (SEI) layer is revealed by in situ infrared (IR) spectroscopy. This work provides a promising route for designing various feasible modification films for LMBs, and it displays better industrial application prospects than the traditional chemical methods owing to the remarkable controllability and scale‐up capacity.

Nitrogen Ion Implantation-Modified Cu Substrate for Stable Lithium Metal Anode

Facile Electroless Plating Method to Fabricate a Nickel-Phosphorus-Modified Copper Current Collector for a Lean Lithium-Metal Anode.

Nanoarray Architecture of Ultra-Lithiophilic Metal Nitrides for Stable Lithium Metal Anodes

An ultralight lithiophilic framework with Faraday-shielded cages for stable lithium metal anodes

Lithiophilic Cu3Sn Modified Cu Foil as Current Collector for Stable Lithium Metal Anodes

Lithiophilic Cu-CuO-Ni Hybrid Structure: Advanced Current Collectors Toward Stable Lithium Metal Anodes.

Overcoming Copper Substrate Thermodynamic Limitations in Anode-Free Lithium Pouch Cells via In Situ Seed Implantation

Single-atomic Zn-(C/N/O) Lithiophilic Sites Induced Stable Lithium Plating/stripping in Anode-Free Lithium Metal Battery

Lithium Induced Nano‐Sized Copper with Exposed Lithiophilic Surfaces to Achieve Dense Lithium Deposition for Lithium Metal Anode

Plasma‐Strengthened Lithiophilicity of Copper Oxide Nanosheet–Decorated Cu Foil for Stable Lithium Metal Anode

Nano‐Cone Structured Lithiophilic Ni Film on Cu Current Collector Facilitates Li + Ion Diffusion Toward Uniform Lithium Deposition

Growing Cuprite Nanoparticles on Copper Current Collector Toward Uniform Li Deposition for Anode-Free Lithium Batteries

Large‐Scale Modification of Commercial Copper Foil with Lithiophilic Metal Layer for Li Metal Battery

Highly-lithiophilic Ag@PDA-GO film to Suppress Dendrite Formation on Cu Substrate in Anode-free Lithium Metal Batteries

<i>In situ</i> coating of a lithiophilic interphase on a biporous Cu scaffold with vertical microchannels for dendrite-free Li metal batteries

Lithiophilic Cu‐Li 2 O matrix on a Cu Collector to Stabilize Lithium Deposition for Lithium Metal Batteries

Vertically Aligned Lithiophilic CuO Nanosheets on a Cu Collector to Stabilize Lithium Deposition for Lithium Metal Batteries

Fast and Simple Ag/Cu Ion Exchange on Cu Foil for Anode-Free Lithium-Metal Batteries

Multi‐Component Lithiophilic Alloy Film Modified Cu Current Collector for Long‐Life Lithium Metal Batteries by a Novel FCVA Co‐Deposition System

Dendrite-free Li Metal Anode by Lowering Deposition Interface Energy with Cu99Zn Alloy Coating

Uniform lithium deposition enabled by a carbon nanotubes framework modified with nanosized ZIF-8 particles for dendrite-free lithium metal anode