Abstract:Despite remarkable development in high capacity iron oxide-based electrodes for lithium-ion batteries (LIBs), the low mass loading and poor areal capacity still impede their practical applications. In this report, novel FeO nanoarrays were directly constructed on three-dimensional (3D) copper foam current collector (denoted as CFPFeOx NAs) via facile hydrothermal growth followed by a postannealing process. The nanoarrays were stacked by numerous FeO porous nanoblocks, exhibiting a unique hierarchical structure. The loading density of FeO in the CF@FeOx NAs reached 2.S mg cm(-2) owing to the hierarchical structure of the novel 3D nanoarray electrode. When tested as an anode for LIBs, the 3D integrated electrode delivered high areal capacities of 3.33 and 2.61 mAh cm(-2) at 0.25 and 1.25 mA cm(-2), respectively. A high areal capacity of 2.12 mAh cm-2 was retained at 2.5 mA cm(-2) after 500 cycles, which is the best electrochemical performance in terms of areal capacity for the iron oxide-based electrodes reported so far. Even at a higher current density of 12.5 mA cm-2, the areal capacity was still maintained at 0.96 mAh cm(-2), demonstrating good rate capability. A lithium full cell test was also conducted using LiNi0.8Co0.05Al0.15 (NCA) as a cathode and the CF@FeOn NAs as an anode, which exhibited a good areal capacity of 0.94 mAh cm-2 at 2.5 mA cm(-2) after 50 cycles. This work offers a promising pathway to greatly enhance the loading density and areal capacity of metal oxide-based electrodes for electrochemical energy storage.

Enhanced areal specific capacity and energy density of solid-state lithium battery by using porous aluminum foam

High Power Density & Energy Density Li-ion Battery with Aluminum Foam Enhanced Electrode: Fabrication and Simulation

Lithium Foam for Deep Cycling Lithium Metal Batteries

Double-layered Skeleton of Li Alloy Anchored on 3D Metal Foam Enabling Ultralong Lifespan of Li Anode under High Rate

Three-dimensional carbon/ZnO nanomembrane foam as an anode for lithium-ion battery with long-life and high areal capacity

Surface Engineering of Commercial Ni Foams for Stable Li Metal Anodes

High Areal Capacity FeS@Fe Foam Anode with Hierarchical Structure for Alkaline Solid‐State Energy Storage

A Stable Porous Aluminum Electrode with High Capacity for Rechargeable Lithium-Ion Batteries

High performance aluminum foam-graphite dual-ion batteries and failure analysis

Single-material Aluminum Foil As Anodes Enabling High-Performance Lithium-Ion Batteries: the Roles of Prelithiation and Working Mechanism

A High-Capacity Polyethylene Oxide-Based All-Solid-State Battery Using a Metal–Organic Framework Hosted Silicon Anode

Uniform titanium nitride decorated Cu foams by electrophoretic deposition for stable lithium metal anodes

Aluminum-Lithium Alloy Fillers Enhancing the Room Temperature Performances of Polymer Electrolytes for All-Solid-State Lithium Batteries

Porous Al with High Surface Free Energy Enables Regulated Charge Transfer Via Electrochemical Etching for High Energy Density Lithium-Ion Battery

High Areal Capacity Li Ion Battery Anode Based on Thick Mesoporous Co3o4 Nanosheet Networks

Hexagonal Rodlike Cu-MOF-74-Derived Filler-Reinforced Composite Polymer Electrolyte for High-Performance Solid-State Lithium Batteries

Aluminum–Silicon Alloy Foils as Low-Cost, Environmentally Friendly Anodes for Lithium-Ion Batteries

3D Copper Foam@FeOx Nanoarrays As a High Areal Capacity and Stable Electrode for Lithium-Ion Batteries

High-Rate Capability and Enhanced Cyclability of Rechargeable Lithium Batteries Using Foam Lithium Anode

3D Graphitic Foams Derived from Chloroaluminate Anion Intercalation for Ultrafast Aluminum-Ion Battery

Dielectric Filler-Induced Hybrid Interphase Enabling Robust Solid-State Li Metal Batteries at High Areal Capacity