Abstract:As a kind of unique marine sediment, Calcareous sand exhibits high compressibility because its irregular particle morphology leads to the formation of large interparticle voids. In this study, using calcareous sand samples from the South China Sea, we employed X-ray CT scanning technology to reveal the microstructural evolution of calcareous sand during compression. This allowed us to establish correlations between particle morphology, relative density, vertical stress, and microstructural parameters. The research findings are as follows: (1) Samples with a higher proportion of cube shape particles have larger initial void ratios, and experience a more significant decrease in void ratio under stress. Dense samples exhibit greater deformation resistance and lower particle breakage rates, resulting in a slower reduction in void ratio under stress. (2) The number of pores in the samples follows a V-shaped trend with an increase in the proportion of cube shape particles, reaching its minimum when the proportions of cube shape and platy shape particles are balanced. The number of pores increases with an increase in vertical stress and relative density. (3) The equivalent pore diameter and pore volume of the samples exhibit an inverted V-shaped trend with an increase in cube shape particle content, reaching their maximum when the proportions of cube shape and platy shape particles are balanced. (4) The more cube shape particles in the sample, the more irregular the pore shapes become. Under vertical stress, the influence of particle morphology on pore shape gradually diminishes until it disappears. (5) The particle coordination number in the samples predominantly falls within the range of 3.79–5.68. The coordination number increases with increasing relative density and vertical stress, with vertical stress exerting a significantly greater influence on the coordination number than relative density. Under vertical stress, samples with more cube shape particles exhibit smaller coordination numbers and higher particle breakage rates.

Influence of the particle morphology and internal porosity characteristics of coral sand in the South China Sea on its limit void ratio

Effects of Size and Shape on the Crushing Strength of Coral Sand Particles under Diametral Compression Test

Experiment of initial relative density effects on sand strength

Effect of the particle shape on the shear mechanical behavior of coral sand

Effect of Particle Shape on the Liquefaction Resistance of Calcareous Sands

Microscopic study of the impact of particle morphology on the compressibility of calcareous sands

Experimental Study on the Mechanical Strength, Deformation Behavior and Infiltration Characteristics of Coral Sand

Seepage deformation characteristic of gap-graded coral sand in the South China Sea

Particle size and confining-pressure effects of shear characteristics of coral sand: an experimental study

Effects of fine content on the mechanical properties and breakage behavior of gap-graded coral sand

Micro-and macro-mechanical behavior of crushable calcareous sand in South China Sea

Experimental Investigation into Limit Void Ratio Characteristics of Calcareous Sands considering Various Factors

Dynamic Characteristics of Coral Sand in the Condition of Particle Breakage

Shear strength-dilation characteristics of coral sand contained fines

Effect of particle size on the failure behavior of cemented coral sand under impact loading

Study on Effect of Particle Size Distribution on Water-Retention Capacity of Coral Sand from Macro and Micro Perspective

Experimental Study on the Impact of Water Content on the Strength Parameters of Coral Gravelly Sand

Study on the interaction between particle shape and particle breakage of coral sand by discrete element method

Strength and dilatancy of coral sand in the South China Sea

Effect of particle size distribution on dynamic properties of cemented coral sand under SHPB impact loading

Stress-dilatancy behavior of marine coral sand incorporating non-plastic fines