Abstract:Fiber reinforced polymer (FRP)/shape memory alloy (SMA) composites are disclosed that can be used to repair cracked members and improve the mechanical behavior of concrete structures. This work aims to synthetically investigate the flexural behavior of reinforced concrete (RC) beams strengthened with FRP/SMA composites through both experimental study and finite element analysis. Five beam specimens are prepared to investigate the effect of important parameters on the flexural behavior of RC beams strengthened with FRP/SMA composites, including the different strengthened materials (i.e., SMA wires, CFRP sheets, and FRP/SMA composites) and different types of FRP/SMA composites (i.e., CFRP/SMA composites and BFRP/SMA composites). The test results showed that the flexural stiffness and capacity improvement of the beam strengthened with only SMA wires were not significant, but the ductility was not reduced. The flexural capacity of the beam strengthened with CFRP sheets was effectively improved, but the stiffness improvement was limited. However, the flexural stiffness and capacity of the beam strengthened with FRP/SMA composites significantly increased. At the same time, the service performance was also improved, FRP/SMA composites could effectively reduce the strain of longitudinal rebars and constrain crack development. Compared to the control beam, the capacity of the beam strengthened with the FRP/SMA composites improved from 17.52% to 40.23%, and the stiffness improved from 9.95% to 17.65%. In addition, the CFRP/SMA composites could more effectively improve the capacity and stiffness of strengthened beams than the BFRP/SMA composites because of the higher elastic modulus of CFRP sheets. The strength of BFRP sheets of the BFRP/SMA composites can be fully utilized after reinforcement. Finally, an iterative method for calculating the recovery stress of SMA wires for reinforcement was proposed and incorporated with finite element method for simulation, which was verified by experimental results.

An Experimental and Numerical Analysis of the Flexural Performance of Lightweight Concrete Beams reinforced with GFRP Bars

Shear Design Method for Non-Prismatic Concrete Beams Reinforced Using W-FRP

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Comparative Approach to Flexural Behavior of Reinforced Beams with GFRP, CFRP, and Steel Bars

Cyclic Behavior of High-Strength Lightweight Concrete Exterior Beam-Column Connections Reinforced with GFRP

Flexural Response of Concrete Beams Reinforced with Steel and Fiber Reinforced Polymers

Flexural Behaviour of Hybrid Bar Reinforced Concrete Beams (GFRP Bars with Steel Wires): An Experimental Study

Experimental Investigation of the Flexural Performance of Hybrid (GFRP and STEEL) Reinforced Concrete Beams

Flexural response of FRP-strengthened lightweight RC beams: hybrid bond efficiency of L‐shape ribbed bars and NSM technique

The flexural behavior and efficiency of RC beams strengthened with SNSM bars under the effect of several end conditions and material properties

Flexural Behavior and Cracks in Concrete Beams Reinforced with GFRP Bars

Experimental Investigation on Flexural Capacity of Reinforced Concrete Beams Strengthened with 3D-Fiberglass, CFRP and GFRP

Theoretical investigation of the structural performance of multi–span reinforced concrete beams strengthened with FRCM systems

Analysis of concrete beams reinforced by GFRP bars with varying parameters

Numerical Simulation of Engineering Cementitious Composite Beams Strengthened with Fiber-Reinforced Polymer and Steel Bars

Experimental study on the flexural deflections of concrete beam reinforced with Basalt FRP bars

Numerical Studies on Flexural Behaviour of Carbon Fiber Reinforced Polymer-Wrapped Reinforced Concrete Beam

Experimental study on flexural behavior of RC beams strengthened with FRP/SMA composites

Experimental study and finite element modelling of the torsional behavior of self-compacting reinforced concrete (SCRC) beams strengthened by GFRP

Flexural behaviour of RC beams with a UHPFRC top layer and hybrid reinforcement of steel and glass fiber reinforced polymer bars

Experimental investigation on the flexural behavior of SFRC beams reinforced with hybrid reinforcement schemes