Abstract:Aging study of photovoltaic (PV) modules requires PV curves analysis at the same conditions of irradiance and temperature as standard test conditions (STC). However, in practical cases, PV characteristics are measured at different conditions other than STC. Therefore, translating these curves to one constant condition is a crucial step to accurately estimate the performance of PV modules. The aim of this work is to develop new translation equations to improve the accuracy and simplify the translating of PV performance values from one set of irradiance and temperature conditions to STC fixed conditions. It should be noted that various translation approaches are published in the literature, all varying in the degree of mathematical complexity or accuracy of translation from low irradiance levels. The translation equations presented in this work are intended to provide researchers with a simple and accurate method of PV performance translation. The introduction of dimensionless temperature and irradiance coefficients further simplifies the approach because these coefficients are the same (or nearly so) for a cell and PV module. A comparative study of four approaches is also performed to translate the PV performance of three PV module technologies, when they are exposed to the same real conditions over a one-year period under the meteorological conditions of Cocoa city (subtropical-climate)/Florida. Modules of monocrystalline silicon (xSi12922), multicrystalline silicon (mSi0166) and amorphous silicon (HIT05667) technologies were studied. PV module' data were provided by the National Renewable Energy Laboratory (NREL), USA. These modules were characterized by their experimental current-voltage I(V) curves according to the average back temperature of the module and the daily irradiation. The obtained results show that the proposed method outperforms the all other three translation methods and shows promising results. Indeed, it records the lowest and constant RMSE value, whatever the weather conditions in the day, and high efficiency in accurately translating PV curves to fixed STC even from low irradiation level. The average RMSEs' range for one day is under 0.4 for all analyzed PV module technologies. Therefore, the suggested translation method is proven to be a promising and efficient tool for future studies such aging and defaults diagnosis.

Impact of Voltage Temperature Coefficient on power prediction of four type silicon photovoltaic module technologies installed in real conditions in the north-central of Algeria

Experimental characterization of photovoltaic systems using sensors based on MicroLab card: Design, implementation, and modeling

Impact of the desert climate on the degradation of photovoltaic modules characteristics: a case study

A new approach to estimate the performance and energy productivity of photovoltaic modules in real operating conditions

Photovoltaic module temperature prediction using various machine learning algorithms: Performance evaluation

Improved PV module model for dynamic and nonuniform climatic conditions in ISIS-proteus

Data of a PV plant implemented in hot semi-arid climate

New translation method to STC of photovoltaic module characteristics: A comparison of conventional approaches and proposal of a novel method

A Multi-State Dynamic Thermal Model for Accurate Photovoltaic Cell Temperature Estimation

Solar photovoltaic power prediction using artificial neural network and multiple regression considering ambient and operating conditions

Evaluation of energy extraction of PV systems affected by environmental factors under real outdoor conditions

Reliability degradation prediction of photovoltaic modules based on dependability methods

Long-term performance analysis and power prediction of PV technology in the State of Qatar

Experimental studies of dust accumulation and its effects on the performance of solar PV systems in Mediterranean climate

An Experimental and Numerical Investigation of Photovoltaic Module Temperature Under Varying Environmental Conditions

An improved model and performance analysis for grid-connected photovoltaic system in Oman

Photovoltaic Power Prediction Using Analytical Models and Homer-Pro: Investigation of Results Reliability

Study of Temperature Coefficients for Parameters of Photovoltaic Cells

Modelling and Experimental Analysis for Performance Improvement of Photovoltaic Module using Different Cooling Systems

Hybrid Modeling for Photovoltaic Module Operating Temperature Estimation

Assessment the long-term performance ratio maps of three grid-connected photovoltaic systems in the Moroccan climate