Abstract:This work presents a new, robust, and reliable conductively heated digestion system with closed vessels (CHDS) for the preparation of plant materials for elemental determination by inductively coupled plasma optical emission spectrometry (ICP OES). The proposed system combines the simplicity of a 24-slot resistively heated aluminum block with the key advantages inherent to closed vessels. Fundamental studies on temperature and pressure were also performed and the difference between the liquid phase temperature (190 °C) and the aluminum block temperature (240 °C) was assigned to the dynamic condensation of the gaseous phase during digestion. The optimized digestion procedure was achieved for 250 mg test portions, 2.0 mL of HNO 3 (65% v v −1 ), 1.5 mL of H 2 O 2 (30% v v −1 ), and a temperature of 240 °C, with a heating rate of 10 °C min −1 and dwell time of 20 min. Under these conditions, the residual carbon contents in digests were generally below 700 mg L −1 . The performance of the CHDS was checked by analyzing plant certified reference materials and the determined concentrations of B, Ca, Cu, Fe, K, Mg, Mn, P, S, and Zn presented no significant differences when compared to the certified values at the 95% confidence level. Recoveries in the 75–108% range and relative standard deviations ≤3% ( n = 3) were typically obtained. Also, the system was applied to the analysis of sixteen samples from an interlaboratory trial, and a comparison with alternative single reaction chamber microwave-assisted digestion (SRC MWAD) and open vessel nitro-perchloric decomposition (NP) digestion methods also showed equivalence at a 95% confidence level in most cases. The CHDS system based on thermally convective heating allowed digestion of up to 24 different plant materials in ca . 50 min, but it is not limited to samples and analytes chosen in this work: the CHDS is designed for typical use in elemental inorganic analysis techniques that require liquid-based sample introduction.

Closed-Vessel Conductively Heated Digestion of Dry Dog Food for Spectrometric Determination of Essential Nutrients

A convective heated digestion system with closed vessels: a new digestor for elemental inorganic analysis

A greener, rapid and accurate microwave-assisted hydrogen peroxide digestion method for ICP-OES determination of heavy metals in pet food samples

Inductively Coupled Plasma Collision Cell Quadrupole Mass Spectrometric Determination of Extractible Arsenic, Cadmium, Chromium, Lead, Mercury, and Other Elements in Food Using Microwave-Assisted Digestion: Results from an FDA Interlaboratory Study

Determination of Metallic Element in Soybean Coat by Fermentation-Microwave Digestion-Microwave after Semi-Ashing Plasma Torch Atomic Emission Spectrometry

Development of an On-Line Raman Spectral Analytical Method for Monitoring and Endpoint Determination of the Cornu Caprae Hircus Hydrolysis Process.

Quick and High-Throughput Quantification of Β-Agonists Residues in Animal-Derived Foods Using Enzymatic Probe Sonication Coupled with Automatic Solid-Phase Extraction

The development and validation of a new method for the fast determination of Al, Ba, Ca, Cu, Fe, K, Mg, Mn, Na, Sr, and Zn in rice by inductively coupled plasma optical emission spectrometry

Prediction of Mineral Composition in Commercial Extruded Dry Dog Food by Near-Infrared Reflectance Spectroscopy

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Comparison of Pretreatment Condition of Cadmium in Fish Sample and Diet by Microwave Digestion Method for ICP-AES

Rapid prediction of the chemical composition of pet food using a benchtop and handheld near-infrared spectrometer

Mineral Composition of Cereal and Cereal-Free Dry Dog Foods versus Nutritional Guidelines

Elemental Analysis of Dietary Supplements by Microwave-Induced Plasma–Optical Emission Spectrometry (MIP-OES) With Ultrasound-Assisted Extraction (UAE)

Development of an Analytical Method for the Determination of Metals in Chicken Breast by Microwave Induced Plasma Optical Emission Spectrometry (MIP-OES)

Multivariate optimization of an ultrasound-assisted extraction procedure for the determination of Cu, Fe, Mn, and Zn in plant samples by flame atomic absorption spectrometry

Determination of 22 Elements in Pre-Prepared Meat Using Inductively Coupled Plasma-Tandem Mass Spectrometry Method

Quantitative analysis and health risk assessment of selected heavy metals in pet food samples using ultrasound assisted hydrogen peroxide extraction followed by ICP-OES analysis

Determination of Cd and Pb in food slurries by GFAAS using cryogenic grinding for sample preparation

Rapid Determination of Calcium, Iron, and Zinc in Gluconate Oral Solutions by Solution Cathode Glow Discharge – Atomic Emission Spectroscopy (SCGD-AES)

Development and Application of an ICP-AES Method for the Determination of Nutrient and Toxic Elements in Savory Snack Products after Autoclave Dissolution