Abstract:Pressure and velocity fields around rigid prisms of rectangular cross-section are numerically simulated for a Reynolds number of 105 using the large eddy simulation (LES). In conjunction with LES, a finite difference scheme is employed on the basis of a staggered grid, in which the convection terms are discretized by the QUICK scheme. The outflow boundary condition is then satisfied by the convection condition. This numerical scheme combined with the LES model offers a computationally efficient tool for simulating high Reynolds number flows around bluff bodies. The LES scheme employed in this study may be viewed as a coherent structure capturing technique to distinguish it from a true LES in which the scales are generally resolved to very small size. The numerical scheme is applied to calculate both the instantaneous velocity and the pressure fields over the entire domain. In addition, the mean and root mean square (RMS) values, the power spectra of the pressure fluctuations on the prism surface, the integral forces (lift and drag forces) and probability densities of pressure fluctuations are presented. Additional calculations concerning the chordwise correlation of pressure around the square prism and its eigenfunction expansion are presented. Simulated results, including the mean velocity along the symmetry line, are then compared with the available experimental data and numerical results by other investigators. With the exception of the lift and drag force spectra whose values do not match closely, and the probability densities for which no experimental data were available, all other features are observed to be in good agreement with experimental findings. Streaklines are also employed to visualize the flow field around rectangular prisms and are found to match the vorticity contour of the flow field. Streakline sequences clearly demonstrate the shedding of two vortices in every cycle of the integral lift force on the bluff body. The separation-reattachment features on the side faces of rectangular prisms are also visualized. A parametric study concerning bodies of different aspect ratios illustrates clearly the modifications in the flow field patterns which are sensitive to the streamwise length of the body and the associated pressure distribution.

A strategy for modifying the effect of turbulence integral scale on fluctuating pressures of rectangular prisms

Revealing Aeroelastic Effects on Low-Rise Roof Structures in Turbulent Winds Via Isogeometric Fluid–structure Interaction

Elimination of pressure wiggles in numerical simulation of wind pressure around buildings

Insight on the surface fluctuating pressures considering distorted turbulence around a rectangular bluff body

Effect of turbulent integral scale on non-Gaussian characteristics of surface wind pressure on square cylinder

The Study Of Wind Flow Around Building With Prismatic Sections By Spalart-Allmaras Turbulence Model

Two-dimensional Simulation of Flow Around Rectangular Prisms

Measurements of fluctuating lift forces on rectangular cylinders in turbulent flow

Numerical prediction of aerodynamic characteristics of prismatic cylinder by finite element method with Spalart–Allmaras turbulence model

Improved Modelling of Interfacial Terms in the Second-Moment Closure for Particle-Laden Flows Based on Interface-Resolved Simulation Data

Numerical Simulation of Flow Past a Triangular Prism with Fluid–structure Interaction

Comparing Methods for Reducing Artificial Pressure Fluctuations Using Large Eddy Simulation in High-Rise Building Wind Load Assessment

Experimental investigation on two-dimensional aerodynamic admittances of rectangular cylinders in various turbulent flows

Strategies for turbulence modelling and simulations

Simulation Research of Effects of Turblence Model on the Aerody namic Performance and Flow Field Structure in High-press Ratio Centrifugal Compressor

Blockage effects on aerodynamics of isolated tall buildings under uniform turbulent flows

Numerical Simulation of Atmospheric Boundary Layer Turbulence in a Wind Tunnel Based on a Hybrid Method

Research on precise and standardized numerical simulation strategy for vehicle aerodynamics

Experimental study on the aerodynamic characteristics and wake flow feature of triangular prisms with various round corner radius

Theoretical and experimental study of the spanwise effect of turbulence on the aerodynamic lift on a wing with different aspect ratios

Scale effects in wind tunnel modelling