Abstract:The study focuses on a comparison of the electrospinning of various polylactide and polycaprolactone (PLCL) copolymers and poly-L-lactide (PLLA) and polycaprolactone (PCL) homopolymers. The chemical characterisation, electrospinnability, fibrous morphology, degradation rate and interactions with fibroblasts were assessed with respect to copolymers and homopolymers with both lower (around 50,000) and higher (around 95,000) molecular weights. The research investigated commercially available as well as synthesised copolymers. The results revealed that the electrospinnability of polymeric solutions depends on both the molecular weight and the PLA/PCL ratio in the final copolymer. It was determined that PLCL copolymers with a higher content of PCL (≥20%) were not spinnable via the electrospinning process. With the exception of PCL, the resulting fibrous materials were found to be homogeneous and with fibre diameters of slightly more than 1 μm with respect to both the tested molecular weights. The degradation rate was tested under simulation conditions via the utilisation of the lipase and Proteinase K enzymes. The degree of degradation was found to depend on the molecular weight, the crystallinity of the polymer and the specificity of the enzyme applied. While lipase was responsible for the degradation of the PCL polymer, it exerted a minor impact on the PLLA and the copolymers. Proteinase K degraded all the tested polymers with a higher specificity towards PLLA and the PLCL copolymers. All the tested polymers were affected by the surface erosion degradation process via fibrous morphology changes and mass loss with no accompanying shift in the molar mass. The electrospun PLLA materials supported both fibroblast adhesion and proliferation. All the tested materials were determined to be cytocompatible with 3T3 mouse fibroblasts.

Synthesis and characterization of graphene nanoplatelets-containing fibers by electrospinning

Effect of Graphene Oxide and Nanosilica Modifications on Electrospun Core-Shell PVA–PEG–SiO2@PVA–GO Fiber Mats

Thermoplastic polyurethane/silica nanocomposite fibers by electrospinning

Electrospinning of Neat Graphene Nanofibers

Nanostructured Electrospun Hybrid Graphene/Polyacrylonitrile Yarns

Graphene-embedded electrospun polyacrylonitrile nanofibers with enhanced thermo-mechanical properties

Electrospinning Fabrication and in Situ Mechanical Investigation of Individual Graphene Nanoribbon Reinforced Carbon Nanofiber

Nanostructures and surface nanomechanical properties of polyacrylonitrile/graphene oxide composite nanofibers by electrospinning

Electrospun Polymer Nanofibers with Antimicrobial Activity

Structures and Properties of Polyacrylonitrile/Graphene Composite Nanofiber Yarns Prepared by Multi-Needle Electrospinning Device with an Auxiliary Electrode.

Preparation and characterization of Ag nanoparticleembedded polymer electrospun nanofibers

Covalent polymer functionalization of graphene nanosheets and mechanical properties of composites

Physical and biological characteristics of electrospun poly (vinyl alcohol) and reduced graphene oxide nanofibrous structure

Advances in electrospun composite polymer/zeolite and geopolymer nanofibers: A comprehensive review

Electrostatic Flocking of Insulative and Biodegradable Polymer Microfibers for Biomedical Applications

Comparison and characterization of different polyester nano/micro fibres for use in tissue engineering applications

PET/Graphene Nanocomposite Fibers Obtained by Dry-Jet Wet-Spinning for Conductive Textiles

Fabrication of Multilayered Polymer Composite Fibers for Enhanced Functionalities

Microfluidic Generation of Bioinspired Spindle-knotted Graphene Microfibers for Oil Absorption.

Mechanical and Antimicrobial Properties of the Graphene-Polyamide 6 Composite

The Effect of Electro blow Spinning Parameters on The Characteristics of Polylactic Acid Nanofibers: Towards Green Development of High-Performance Biodegradable Membrane